Enhance the tone and versatility of your bass guitar with the Tone Capsule Onboard Bass Preamp from Darkglass Electronics, active electronics that can be installed in your bass for enhanced control. The Tone Capsule preserves your instrument's natural character while providing improved control over bass, high-mid, and low-mid frequencies.

Each of the three aforementioned frequency bands can be adjusted by ±12 dB on the included potentiometers. The pots can be wired in different configurations to accommodate instruments with a range of setups, including those with two volume controls, blend and volume control, and/or bypass switches. Finally, the Tone Capsule supports use with either one or two 9V batteries in series, allowing for 9 or 18V operation respectively (batteries and clips not included).

Active Electronics for Bass Guitars    Bass Preamp Inspired by Microtubes B7K    Pristine and Delicate Transparency    Bass, Low Mid, and High Mid Controls    Maintains Instrument's Natural Tone    Expands Tonal Possibilities    ±12 dB EQ Adjustment    9 or 18V Operation

Tone Capsule essentially stuffs the basic circuit characteristics of the Microtubes B7K preamp into a package small enough to be loaded directly into an electric bass guitar. The onboard preamp carries the pristine and delicate transparency of the B7K, itself inspired by Periphery's bass player, Adam Nolly Getgood.

Related Questions and Answers

Q: 1. What is the maximum load capacity for this product? How many LBs Max.?

A: The Marshall Electronics CVM3 will have a Max weight of 500g when used in motion and a Hold max weight of 1kg when stationary.

Q: 2. Does this fit the Sony a6000 camera?

A: With body only a loose fit but with body only and strap attached a good fit. I would personally use this for air travel with the lens dismounted. (I have an Olympus EP 5 with leather half case attached and sizing is similar.)

Q: 3. How do I turn it off

A: Position 2 on the MG Electronics PGM-25 MIC 25W Megaphone's switch would be "OFF/TALK," which would turn off sound effects and render the device silent until push-to-talk is engaged.

Q: 4. I'm looking for a solution to mount a video fluid head to the top of a small wooden wall for livestreaming athletics from a media tower. Is it possible to mount a video fluid head (Such as Manfrotto, Benro) to the center of this on top, after securing the base to the top of the wall with screws?

A: I do not see why not. Sounds like a plan.

Q: 5. To be able to hit 7 cameras with the one XLR output, do you just passively split the signal, e.g. jumper a set of jacks on a patch panel together? Or how do you hit multiple?

A: This is a very specialized product. You may want to call up Marshall directly at (310) 333-0606 for assistance wiring it out.

Q: 6. Can we use AN-9001 with Bosch Praesidio Amplifiers? as the AVC is built in with the Power amplifiers in BOSCH.

A: Unfortunately not. The TOA AN9001 Ambient Noise Sensing Microphone is designed for use with the TOA 9000 Series Digital Matrix Mixer/Amplifiers, in commercial sound installation. The AN9001 microphone requires the AN-001T Ambient Noise Controller Module or DP-L2 processor.

Q: 7. What is the size of that power connector? 5.5mm?

A: Yes - it's 5.5mm (the standard DC mini-power plug, with + voltage in the center)OD: 0.215 inchesID: 0.075 inchesDepth: 0.375 inchesI bought two - they work great!

Q: 8. Does this camera come with a power supply?

A: Yes, the Marshall Electronics CV504-WP All-Weather Full HD Micro POV Camera comes with a 12V power supply.

Q: 9. We are creating an oak shelf 34" x 8" to hold an PTZ Optic camera for live streaming. Would it be better to mount 4 of these brackets between the stationary shelf and the corners of the floating camera shelf or just mount 1 bracket between the stationary shelf and the camera?

A: The Marshall Electronics Four-Point Vibration Absorbing Bracket for Micro Broadcast Cameras will only have a 3" x 3" x 1" surface for light weight cameras like the Marshall Electronics CV503. With the small payload limit allowed, I do not believe using multiple units will help stabilize/support the weight of your PTZ camera and shelf.

Q: 10. What sort of warranty does this have? Researching it revealed buyers having problems with it, not happy with it.

A: The Medeli Electronics AKX10 Arranger Pro Digital Workstation Keyboard with Speakers comes with a 1 year warranty from Medeli.