Computer Monitor Tripod Stand

Digitalfoto Solution Limited Cinetree Gear Tree With Rolling Tripod Stand

Product Code: ga159522
Availability: In Stock

$1,980.00 $2,455.20

Qty

14 reviews Write a review

Description
Reviews (14)

The CINETREE Gear Tree with Rolling Tripod Stand from DigitalFoto Solution Limited outfits content creators with a mobile studio and workstation that can house all of their devices to maximize their floorspace. The gear tree revolves around a tripod stand with caster wheels, which has a total working height range of 3.9 to 7.3' using the included extensions. It can support loads up to 55 lb and features specific mounting components for your laptop and monitor. Use the 5/8" baby pin receivers, male connectors, and 1/4"-20 screws to secure additional lighting, power, and audio accessories.

Mobile Studio for Content Creation Holds Laptop, Monitor, Lights 55 lb Load Capacity 3.9 to 7.3' Height Range Tripod Stand with Wheels Extension Arm, Grip Arm VESA Monitor Mount Pistol-Style Grip Sliding Arms 5/8" Baby Pin & 1/4"-20 Screw Connection

Key Specs
Item Type	Studio Boom Stand
Microphone Mount	No Mount Included
Mic Mount Thread Size	No Thread-Direct Connection to Integrated XLR
Maximum Height	7.3' / 221 cm
Minimum Height	3.9' / 119.5 cm
Base Type	Tripod with Casters
Color	Silver
Parameters
Microphone Mounting
Microphone Mount	No Mount Included
Mic Mount Thread Size	No Thread-Direct Connection to Integrated XLR
Extension
Extension Type	Straight (Extendable)
Length	3.4' / 103 cm
Stand & Base
Maximum Height	7.3' / 221 cm
Minimum Height	3.9' / 119.5 cm
Collapsed Size	44.1" / 112 cm
Column Diameter	1.4" / 35 mm
Base Type	Tripod with Casters
Physical
Color	Silver
Construction Material	Aluminum, Steel
Load Capacity	55.1 lb / 25 kg
Weight	35.3 lb / 16 kg
Packaging Info
Package Weight	49 lb
Box Dimensions (LxWxH)	45 x 25 x 7"

A durable steel stand increases your load bearing capacity. Detachable braked casters make moving the stand around your office or studio a breeze. An empty sandbag is included to work as a counterbalance for additional stability.

Each pistol-style grip arm securely attaches to the stand's 1.4" diameter center column to support cameras, microphones, lights, softboxes, and other equipment. Their dual-locking structure prevents the arm from sliding during use. Pressing the handle allows for flexible vertical adjustment and 360° rotation. Attach the reversible 5/8" baby pin and 1/4"-20 adapter into each arm for increased compatibility.

The super clamp has a total clamping range of 0.6 to 2" to attach the extension pole and grip arm to the stand. A side-mounted 1/4"-20 thread and M5 thread allows for additional attachment to the clamp.

The VESA monitor mount has both 75 x 75mm and 100 x 100mm mounting patterns. A 5/8" baby pin receiver secures the mount to the stand. Adjust the mount freely with the onboard tightening clamps.

The laptop board has both 1/4"-20 and 3/8"-16 threads at the bottom to secure to a pistol grip arm. The board itself has a total area of 15.7 x 17.7" to accommodate most laptops.

The mounting plate features a 5/8" baby pin receiver on one end and a 3/8"-16 screw on the other end to secure a ball head or tripod head to the stand.

Related Questions and Answers

Q: 1. Hello, the description says it will work with the DI RS2, but in the Q&A section, the staff said that it will not fit the new Ronin S. Which one is it? Thank you!

A: Yes, this is compatible with the Ronin-RS2.

Q: 2. will this work with the weebill s?

A: This works with any gimbal that has 1.6 to 1.8" Diameter handle. It should work with the Weebill-S.

Q: 3. Compatible with RSC2?

A: Yes, the DigitalFoto Solution Limited ARES Dual-Spring Handle for Single-Handed DJI & Zhiyun Crane Gimbals is compatible with the DJI Ronin SC2.

Q: 4. is thia compatible with the zhiyun crane 3 lab?

A: Yes, this support vest is compatible with the following hand held gimbals. Moza Air 2, DJI Ronin-S, DJI Ronin-SC, Zhiyun CRANE 3S, or any single-handle gimbal with a 3/8"-16 or 1/4"-20 mounting thread

Q: 5. Can I remove the handles and attach Tilta Nucleus-M handles?

A: We are not aware of this products ability to have the handles changed for the Nucleus-M handles.

Q: 6. Max chest & waist size of wearer?

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro, and Other Handheld Gimbals can support chest sizes up to 48.42" and waist sizes up to 51.18".

Q: 7. What is the size of the silver pin on the end of the spring arm?

A: The silver pin/post on the dual spring arm included in the DigitalFoto Solution Limited THANOS Pro with Adapter for DJI RS 2/3/3 Pro & Single-Handle Gimbals (11-40 lb) kit is 16mm.

Q: 8. Is there a sled compatible with this setup?

A: The Sled option for the THANOS PRO3 is https://bhpho.to/3l2EieT

Q: 9. Can you comfortably wear the vest backwards? I prefer to have weight of the arm attach at the rear of my hips, not the front for better weight distribution.

A: No, ergonomics of vest will not allow it to fit backwards.

Q: 10. What Crane models are supported by this item?

A: Crane 2, Crane 2S, Crane V2, Crane Plus

newkphoto	27/09/2024
I've used Lightware bags for years, so I'm not surprised by the design and construction of this one. Serves me very well for my new, lighter kit of strobes, stands, tripod, etc. Now I can roll into the biggest weddings with just two wheeled bags... 5

matteobava	29/08/2024
used this bag for over 40 flights to pack my light stands, tripod, mopod and background. All the equipment arrived intact and the bag is still in top notch shape. Only con is stat it does not have a handle on the bottom part, right next the wheels to make unloading easier... 5

Scott	15/08/2024
I use this bag for local gigs and travel. I looked for similar bags but could not match the quality or usefulness. The one small item that I'd like to see them add is a zippered pouch on the inside of the main compartment. I use this for my Tripod, light stands and stingers. 5

Bruce	13/08/2024
I own 2 of these and use them for the heavy stuff - c-stands and Mole - Hollywood Beefy Baby stands. About 4 fit in each bag w/ arms.The beefy baby stands get pretty bulky with arms though. I mix in some Manfroto aluminum versions of the beefy baby to lighten the load at times. The bags also have zippered pockets on either side that hold my 7' umbrellas or other. I've had one for 2 years and it's holding up well. 5

anyonymous	04/08/2024
This case will hold the largest of tripods along with four heavy duty light stands, yet handle very well in the tightest of spaces. This is one of the most intelligently designed cases I have ever seen. Carrying long grip equipment has always been a clumsy problem, but this case offers the PERFECT solution! 5

anyonymous	17/07/2024
Various light stands, softboxes, umbrellas, and grip stands can now be narrowed down to one case. Perfect! I simply could not believe how much extra space I had in the side pockets. Great! Well built and handles well. 5

anyonymous	05/07/2024
I just used this to fly American Airlines to the US Virgin Islands. It was flawless. I loaded it with 49lbs and nothing was considered too large/heavy for flying. It was a checked bag. I put in 2 medium tripods with heads attached (manfrotto 755), 2 8ft light stands, a 2ft slider in a case, an extra fluid head, a monopod, and a glide cam. I rolled this puppy around the resort and was about to operate right out of the bag. It's got straps to hold things tight when needed, and loose when you want it loose. The pockets on the side are UNPADDED so don't stick anything in there you don't want broken from a hit. Build quality is great. Super heavy stitching and double zippers make it easy to open and close. It's re-enforced like luggage near the user-replaceable wheels so when you're rolling up stairs, it's solid. 5

Brian	09/06/2024
Wonderful bag that I've dragged all over, including airports and one Int'l trip.� c-stands, light stands, tripods, even a sandbag at the bottom; this bag takes it all.� Thanks to Zack Arias for the recommendation way back when :)� � Now finally the side pockets have holes (from umbrella ends) and the wheeled base is wearing, and etc.� So I'm considering buying another--or possibly the ThinkTank 50 (which is $600!).� Ugh.� This one is a good value for the price;� Will always recommend.� Wheels for life, 5

marc	27/05/2024
If you need to haul around 48inch stuff it is perfect, I can put 2 octa backs on one side and a large and medium strip bank on the other side, my 48 boom fits perfect along with more stands thank i want to carry. Built like all other lightware cases. 5

holyzoo	12/05/2024
I had looked at other bags from $100 less to $300 more, and decided to go with this bag from Lightware. It fits up to the longest stands I have, yet the bag is very lightweight. There are 3 compartments. The main one in the middle is true to the specs listed here - 48x10x8. The 2 side compartments are about 45 long x 8 high or a little under. And the width of the side pockets range from 3.5 at the edges all the way out to 6 at the center - very roomy for additional lightweight gear. I'm sold! Only con was not having more photos on the website or anywhere else, since I bought it online. I'm glad I did. 5