Create superfat bass and lead tones to stunning effects with the Behringer CRAVE, an all-analog semi-modular synthesizer that leverages old-school circuit designs into a modern performance instrument. Loosely based on the Moog Mother 32, the CRAVE features a 3340 voltage-controlled oscillator used by legendary Prophet 5 synthesizer and a classic, switchable high-/low-pass 24 dB/octave ladder filter made famous by Moog synthesizers.

The onboard 32-step sequencer generates custom patterns that can be saved into one of 64 memory slots, while the arpeggiator features 8 patterns that you can interact with by playing chords. The front panel is adorned with 47 real-time controls and an 18x14 I/O matrix patchbay, allowing you to interface with the entire world of Eurorack synthesizers. You'll be amazed by CRAVE's tone-shaping capabilities.

Legendary 3340 VCO from Prophet 5    Pure Analog Signal Path: VCO, VCF, VCA    Pulse and Saw Waveforms    Switchable HP/LP Classic 24 dB Filter    32-Step Sequencer, 64 Storage Slots    Advanced Arpeggiator    Dedicated Triangle/Square LFO    18x14 I/O Matrix, Eurorack Compatible    47 Real-Time Controls    External Audio Input for Processing

• Analog synthesizer with legendary Prophet 5 VCO design allows for insanely fat music creation
• Pure analog signal path based on authentic VCO, VCF, and VCA designs
• Super-rich oscillator with pulse and sawtooth wave outputs for ultimate sounds
• Classic Moog 24 dB ladder filter with resonance for legendary sound performance
• Switchable low/high pass filter mode for enhanced sound creation
• Modern and easy-to-use 32-step sequencer with 64 onboard storage slots
• Advanced arpeggiator with wide patterns for great sound effects
• Dedicated and fully analog triangle/square wave LFO
• 16-voice Poly Chain allows combining multiple synthesizers for up to 16 voice polyphony
• Semi-modular design with default routings requires no patching for immediate performance
• 18x14 I/O matrix for incredibly vast and flexible patching options
• Noise generator dramatically expands waveform generation
• 47 controls give you direct and real-time access to all important parameters
• External audio input for processing external sound sources
• Comprehensive MIDI implementation with MIDI channel and Voice Priority selection

Authentic 3340 Oscillator

• CRAVE’s 3340 Voltage Controlled Oscillator (VCO) provides your choice of pulse or reverse-sawtooth waveforms. When pulse is selected, the width can be varied using the Shape switch, for narrow, square wave, or wide pulse, with a tuning range of ±1 full octave. The VCO can be modulated via the envelope or the low-frequency oscillator (LFO). Performance is further enhanced by the Mix control, which balances the levels of the internal VCO and noise generator. This amazing flexibility gives you the tools to hone your sound.

Versatile VCF

• The very heart of CRAVE’s sound is its Classic Moog 24 dB ladder filter, which lets you freely experiment with the Cutoff Frequency, Resonance, and Modulation, to dial in the perfect sound. CRAVE’s filter Mode switch can be set to either low- or high-pass for selecting the range of your choice.

While it is a monophonic instrument (one note at a time), CRAVE's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony and provides vastly improved reliability and stability over its 1970s and '80s predecessors.

CRAVE's Envelope generator features Attack, Decay, and Sustain knobs that help you craft incredible sounds, plus a Sustain On/Off switch, which can either sustain the note for as long as the key is held, or start the decay as soon as the attack setting times out.

Onboard Sequencer and Arpeggiator

• CRAVE’s sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save, and recall up to 64 patterns, all of which can be stored in 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the CRAVE are fun, mesmerizing, and totally addictive.

Truly Analog LFO

• Thanks to its dedicated and fully analog low-frequency oscillator (LFO), CRAVE lets you choose from either triangle or square waveforms and features an LED that provides visual feedback of the adjustable LFO Rate.

Modulate to the Max

• In addition to the great sound-sculpting features already mentioned, the CRAVE still has more to offer. The noise generator can be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. You can even modulate the pulse wave via the LFO, envelope, or manually, for sounds ranging from mild to wild.

Controls and Connectivity

• Help yourselves—like you, Behringer is full of gear heads, too. For those who want the numbers, CRAVE has 47 controls, all laid out in a highly intuitive format that puts the joy back into your music creation. And you can expand CRAVE’s tone-sculpting capabilities beyond your wildest dreams by utilizing the 18x14 I/O matrix for incredibly vast and flexible patching options.

Related Questions and Answers

Q: 1. What are the dimensions of the actual case? Thanks.

A: The case is approximately 10.8 x 5.5 inches.

Q: 2. where was this product made?

A: This product is made in CHINA.

Q: 3. Will this case accommodate the D850 and any of the smaller lenses?

A: Yes, it will fit with plenty of room.

Q: 4. What is the driver size for these headphones?

A: The AKG K240 feature 30mm drivers.

Q: 5. what ear pad replacement i can buy from B&H for this headphone ?

A: At this time, we do not offer replacement ear pads for that model headphone.

Q: 6. does this case fit Nikon d810 with 24-120mm lens?

A: Works with D800 so probably will work with D810. Suggest you compare camera specs.

Q: 7. Is the case deep enough to use with the hoods attached for the lenses recomended?

A: The case is wide enough to keep the hoods on in reverse. The case is not long enough to have the hood attached for shooting.

Q: 8. Will this case hold the Nikon Z 180-600mm lens with reversed lens hood and tripod collar?

A: The Nikon CL-1434 Semi-Soft Lens Case is too small for the Nikon NIKKOR Z 180-600mm f/5.6-6.3 VR Lens (Nikon Z). The Z 180-600mm lens includes the Nikon CL-L6 Lens Case, BH #NICLC6.

Q: 9. Will this fit the Nikon 100-400mm Z lens?

A: Yes, the Nikon NIKKOR Z 100-400mm f/4.5-5.6 VR S Lens will fit inside the Nikon CL-1434 Semi-Soft Lens Case.

Q: 10. Will this case fit the D850 with the MB-D18 attached?

A: No. The following unit will accommodate the body only with no grip attached.