The VL-2X 2-Channel V-Mount Charger & Power Supply from IDX provides sequential charging for lithium-ion and NiCad batteries, automatically switching to the second battery after fully charging the first. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design. It also features a 4-pin XLR power output that offers up to 36W of DC power when the charger is connected to a wall outlet and your batteries are removed. (The DC output is disabled when a battery is charging.)

This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition.

2 x 14.4V, 143Wh Lithium-Ion Batteries    Ideal for Full-Size Cinema Cameras    D-Tap & USB Output Ports    Charge/Overcurrent/Exposure Protection    Unrestricted for Carry-On under IATA    2-Position Sequential Charger    60W 4-Pin XLR Power Output    Recessed Power Switch    Built-In Carry Handle    100-240V Worldwide AC Power Support

DUO-C190:

7 hours for one / 14 hours for two

DUO-150:

5 hours for one / 10 hours for two

CUE-D150:

5 hours for one / 10 hours for two

ELITE:

4.5 hours for one / 9.4 hours for two

E-HL10DS:

3.4 hours for one / 7.2 hours for two

DUO-C95:

3.4 hours for one / 7.2 hours for two

DUO-95:

3.3 hours for one / 7 hours for two

CUE-D95:

3.3 hours for one / 7 hours for two

E-HL9:

3.2 hours for one / 6.4 hours for two

CUE-D75:

3 hours for one / 6 hours for two

NP-L7S:

3 hours for one / 6 hours for two

Related Questions and Answers

Q: 1. I am getting ready to purchase the IDX Cue-D300 (286Wh High Capacity Load) battery but don't see it on the list that it can be charged by the VL-2X. Can this IDX VL-2X charge the IDX CUE-D300 battery?

A: Yes. A can be charge on B. See below. However the following is from the manufacturer. "Yes it can. However, better options would be VL-4Se or VL-2000S due to higher current provided by these compared to the VL-2X" A IDX System Technology CUE-D300 286Wh High-Capacity/Load Li-Ion Battery (V-Mount) BH #IDCUED300 • MFR #CUE-D300 https://www.bhphotovideo.com/c/product/1461522-REG/idx_system_technology_cue_d300_high_capacity.html B IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply BH #IDVL2X • MFR #VL-2X https://www.bhphotovideo.com/c/product/1244848-REG/idx_system_technology_vl_2x_2_channel_charger_for_li_ion.html

Q: 2. Could this battery be placed on a Canon C70 rig and power the camera and an Atmos monitor?

A: Yes, the batteries of the IDX System Technology 2 x Imicro-150 Batteries & V-Mount Plate Kit could be used to power a Canon C70 and an Atomos monitor simultaneously.

Q: 3. Is this only for IDX batteries? I tried charging multiple high capacity Core SWX V mount batteries on this but the light will turn blinking orange after about 10 minutes and stop charging.

A: The IDX System Technology VL-2X 2-Channel V-Mount Charger & Power Supply will charge any V-mount battery brand.

Q: 4. Can the DC output power a Sony PXW-FX9 through the Core SWX Battery Plate?

A: We are not aware of this specific combination. However we believe that it should work.

Q: 5. Can the 4-pin DC output power an Arri L5-C (with two bricks attached)?

A: The DC output is a pass though for the AC. It can only charge the batteries, batteries cannot be used for power.

Q: 6. would this be able to charge nano 98wh batteries or it only charge idx batteries?

A: this will only charge IDX batteries

Q: 7. Do the support struts at the bottom fold in or collapse to make the footprint slimmer for travel?

A: Yes they do.

Q: 8. Which V-mount batteries does this charger not work with?

A: In general V-Mount battery systems are interchangeable. This should work with any V-Mount battery.

Q: 9. Could this charger be used to charge IDX System Technology CUE-D75 & CUE-D95 Vmount batteries? Thanks!

A: Yes, not only can it charge the Cue-D75 and Cue-D95, it can do a variety of other batteries. Time to charge these batteries is 3 hours for one / 6 hours for two.

Q: 10. Will this work with a v-mount D&O Lighting 190Wh 14.8V?

A: This should be able to charge any V-Mount battery.