Listen to your music with accuracy with the Behringer TRUTH 3.5 BT, a pint-sized pair of powered studio monitors that are the perfect sonic upgrade to any studio or for multimedia and gaming applications. The right speaker houses the internal amplifiers and provides a connection to the left passive speaker. The dual 32W amplifiers power each 3.5" woofer and each 1" silk-dome tweeter, which combine for a full-range sound with plenty of volume.

The rear panel includes a pair of balanced 1/4" inputs and a pair of unbalanced RCA inputs. For acoustic tuning, use the integrated 2-band shelf EQs. The integrated Bluetooth 5.3 receiver allows you to stream music wirelessly from your smart device or computer. The front of the right speaker includes a 3.5mm TRS aux input and a 3.5mm headphone output. A power cord and passive speaker cable are included.

Linear Reference-Class Studio Monitors    Bluetooth 5.3 Audio Streaming    Advanced Waveguide for Large Sweet Spot    3.5" Woofer and 1" Silk-Dome Tweeter    Dual 32W of Class-D Amplification    1/4" TRS and RCA Inputs    3.5mm Aux Input, 3.5mm Headphone Jack    Includes Power Cord    Includes Passive Speaker Cable

• Ultralinear 64W reference-class studio monitors with high-quality Bluetooth 5.3 audio streaming
• Acclaimed TRUTH series monitors are well received by demanding studios but also ideal for home recordings, gaming, and multimedia workstations
• Advanced Waveguide technology creates ultimate acoustic dispersion and extremely large sweet zone
• Ultrahigh resolution 1" silk-dome tweeters for ultimate sound reproduction
• Long-throw 3.5" woofers with deformation-resistant glass-fiber cone
• Two stereo analog inputs featuring TRS and RCA connectors can be used simultaneously or mixed with a digital stereo source
• Front-panel volume control, aux input, and headphone connector for convenient access
• Low- and high-frequency controls for acoustic tuning
• High-density composite enclosure for ultralow diffraction and reduced low-frequency distortion

Sporting 3.5" glass-fiber woofers and 1" silk-dome tweeters, TRUTH 3.5 BT monitor speakers bring high-quality audio within the reach of anyone with a computer workstation. Whether you're a musician tracking your latest masterpiece, or just someone who listens to your favorite songs at work, TRUTH 3.5 BT will make them sound great. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.

Stream music from any Bluetooth-equipped device such as your iPad, iPod touch, iPhone, or even your laptop computer.

Flexibility is built into every pair of TRUTH 3.5 BT speakers. You also have the freedom to connect any device with stereo RCA, TRS, and 3.5mm stereo jacks, or mix them with your computer's digital audio. You can wail away to your heart's content in total privacy, thanks to the powerful headphone jack.

Related Questions and Answers

Q: 1. Does it reconnect automatically? For a pro device, I need it to only connect when I tell it to, and never for a phone call.

A: Yes, the Switchcraft 318BT Phantom-Powered Bluetooth Audio Receiver will automatically find and reconnect to paired devices. If you don't want it to automatically reconnect to a paired device, you can delete the 318BT from the Bluetooth profile of the paired transmitting device and pair it again when you want to use it or turn off the Bluetooth on that device when in the vicinity of the 318BT.

Q: 2. Can you listen to the 3.5mm AUX In and the TRS inputs simultaneously?

A: No. Both inputs on the PreSonus MicroStation BT 2.1 Monitor Controller cannot be used simultaneously. You have the option of using either the 3.5mm AUX input or the left/right 1/4" TRS inputs, but not both at the same time.

Q: 3. Does the battery have to be removed to be recharged?

A: The battery does not have to be removed to be recharged.

Q: 4. Can a dj-style mixer be connected directly to these monitors? Do they need an amplifier or DSP in between? I was thinking about using these for my small home sound system. I have a turntable and a CD player connected to a mixer, which currently feeds into an enormous old Pioneer Digital Signal Processor unit (that gets pretty hot), and I have big old passive event-sized speakers connected to the DSP. I would like to replace the giant speakers with something smaller that will sound good for the space, and I'd *like* to eliminate the DSP unit if possible. But I can't tell from the product info here or on the manufacturer's website if I'm thinking about this correctly or not.

A: These speakers can be connected directly to the outputs of a dj mixer via the two TRS 1/4'' jacks, or the rca inputs on the back. These can also be connected to a DSP units outputs in the same way. Please note, these speakers are already powered by a built in amp, and can not take a connection from a speaker amplifier.

Q: 5. Will these speakers work with a Mac Mini w/Mac OS 11.6 with bluetooth?

A: Yes, the Mackie CR3-XBT Creative Reference Series 3" Multimedia Monitors with Bluetooth should connect to a Bluetooth-enabled Mac Mini, either over Bluetooth or hardwired via cable.

Q: 6. Does the Peavey PV 10 include the 15 volt power supply? Does B&H carry the PV 10 Rack Kit?

A: The mixer wil come with the appropriate power supply. Please contact our Pro Audio Department to special order the rack kit, if required.

Q: 7. How would I connect this to a mac mini to transmit computer audio to my speakers?

A: The PreSonus MicroStation BT 2.1 Monitor Controller with Bluetooth Connectivity could receive signal from a Mac Mini capable of Bluetooth transmission, and then send the audio received to the speakers over cable connection. It could also accept signal over cable from a 3.5mm audio output from the Mac Mini if available, but would not transmit the signal wirelessly to the speakers. The MicroStation BT 2.1 is capable of receiving Bluetooth signal but not also transmitting, so the speakers must be connected to the device with cables.

Q: 8. Will the unit pair and transmit to Signia AX hearing aids? The HA's use BT LE

A: Yes the Sennheiser BT T100 being a bluetooth transmitter will connect to the Signia AX hearing aids which will act as the bluetooth receiver.

Q: 9. What is the file size per minute of recording?

A: Information on file size per minute of recording has not been provided by the manufacturer. However, the F2 and F2-BT can be used with microSD, microSDHC, and microSDXC cards up to 512 GB (Class 4 or higher).

Q: 10. Can I connect the recorder to the camera and record to it directly? And is there a headphone port to listen to and check the sound?

A: The F2-BT has a locking 3.5mm stereo output jack with dedicated volume up/down buttons which can be used to connect to a camera, secondary recorder, or used with headphones for monitoring the audio. Keep in mind that the output signal from the recorder is line level and the output connector is a locking type, so a few adapters are required to create a setup with the connections and options you will need to connect the recorder to a camera and also allow you to monitor the audio. If you want to connect the F2-BT to the mic input on a DSLR, you will need to use a level matching cable as well as a cable with a locking 3.5mm connector. You can make this work by using a Senal Right-Angle Locking 1/8" Mini to Right-Angle 1/8" Mini Output Cable (B&H # SEAWSCBLMINI) combined with a Kopul ACH4-25MON Line-to-Mic Attenuator Cable (B&H # KOACH425MON) which also provides a headphone tap. Connect the Senal and Kopul cables using a female coupler such as the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter (B&H # HOASMFSMF). These adapters will allow you to record with the F2-BT and also send the audio to your camera, as well as provide a headphone jack so you can monitor the sound while recording.