The 24781 Cinema Contour Fixed Frame Screen by Da-Lite has a 81.5 x 192.0" viewing area, 2.35:1 aspect ratio, and 208" diagonal.

The HD Progressive 1.3 surface has a gain of 1.3, 150° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction, and allows for more flexibility with ambient light conditions. This seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. HD Progressive 1.3 can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification. Black backing on the back of the viewing surface prevents light bleed-through.

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

208" Diagonal    2.35:1 Cinemascope Format    HD Progressive 1.3 Surface    1.3 Gain & 150° Viewing Angle    Black Backing Retains Brightness    Surface is Seamless    3" Wide Frame    Pro-Trim Fabric Frame Covering

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Standard black backing retains projected brightness

Related Questions and Answers

Q: 1. does this work with HD Pentax-DA 55-300mm f/4-5.8 ED WR Lens?

A: Yes! I've shot some tack-sharp daylight wild animal photos with the Pentax DA 55-300mm/1.4x Rear Converter combo. Note: Since you'll lose an f/stop with the teleconverter, the combo will work best for outdoor tele-zoom photography in favorable lighting conditions.

Q: 2. Works for the Blackmagic Cinema Camera Pocket 4K?

A: No, the Vello Film Screen Protector for Blackmagic Pocket Cinema Camera is not compatible with the Blackmagic Cinema Camera Pocket 4K.

Q: 3. Will this work with a K3 as well as the listed K3 II, etc.?

A: Yes, the Pentax DA* 11-18mm F/2.8 ED DC AW lens is compatible with the Pentax K3 camera.

Q: 4. How will this lens behave on a FF body like the K1?

A: The Pentax HD Pentax DA* 11-18mm f/2.8 ED DC AW Lens is designed for cropped sensor cameras only. The Pentax K-1 does have a cropped sensor mode so you could use this lens. You will only be using a small section of the sensor and will get a small file size.

Q: 5. Can large filter holders be thread attached to the front of this lens?

A: As long as the brand/model filter holder you own or are planning to purchase has 82mm adapter rings designed for use with the filter holder, then yes, you may attach a filter holder (with the 82mm adapter ring) to the filter threads on the front of the Pentax HD Pentax DA* 11-18mm f/2.8 ED DC AW Lens.

Q: 6. How deep is the 1.3 x 1.3 OCF Softbox?

A: Approx 15 inches deep.

Q: 7. Will it work with Pentax K-5 and 150-450mm 4.5-5.6 lens?

A: Yes, its compatible but you will probably lose autofocus on the long end.

Q: 8. How many channels of embedded audio does this pass through? Also, what's the latency of the SDI signal if used to split a viewfinder output?

A: The Freakshow HD Micro Split 4K/12G Reclocking DA with Standard Connector will embed audio on all channels. You should experience little to no latency.

Q: 9. Is this softbox double diffused?

A: Yes it has a removable Interior Diffuser or baffle.

Q: 10. Does this accept 3G level A and Level B? Any compatibility issues between Black Magic or Barco gear?

A: The Freakshow HD 4K 12G-SDI MSX8-O 1 x 8 Microsplit Reclocking DA does support both Level A and Level B SDI signals. There should be not compatibility issues when using the Freakshow HD 4K 12G-SDI MSX8-O 1 x 8 Microsplit Reclocking DA with other brands like Blackmagic and Barco.