Power devices such as IP cameras, access control systems, smart sensors, and access points with the black INJ-POE-PLUS 30W PoE+ Injector from Verkada. This unit will support devices that require up to 30W of PoE. It complies with 802.3af/at standards and supports 1 Gb/s passthrough data rates. This injector can be wall mounted for a flexible installation option.

Delivers 30W Power over Ethernet    802.3af/at Standards    1 Gb/s Passthrough Data Rates    Shielded Ethernet Ports    Wall Mountable

Devices that require lower power only receive the power they need

Automatic detection and protection of non-standard Ethernet terminals

Compact design for an easy fit in a variety installations

Related Questions and Answers

Q: 1. Our camera is 75' from the platform. will this camer zoom that far without distortion?

A: I would consider a 20x or 30x PTZ camera based on the ranges that you work and need to zoom. https://bhpho.to/3LOVCiF

Q: 2. How much delay does there seem to be over SDI back to a switcher? (not NDI)

A: The AViPAS AV-1280 SDI PoE PTZ Camera (Gray) has not been tested for latency. However, the SDI output latency would be very low and close to real-time.

Q: 3. How far away can the subject be?

A: At 10X, we recommend 40ft or less.

Q: 4. I have the 4D Controller and the old AV-1081 (RS232 in only) if I buy this AV-1281 (RS232 in/out) can I control both Cameras?

A: Yes, the Avipas 4D controller supports - IP & Serial RS-232/422/485 Communication. Yes it should allow you to control IP Network cameras and RS-232 cameras simultaneously.

Q: 5. Can you live stream to youtube with this camera?

A: Yes, this has an IP Streaming Output which you can use to stream to Youtube.

Q: 6. I also plan to use the AV-1281 with an ethernet only solution. Over the cat 6 the power will be provided through POE and the received video data with IP streaming into OBS software. Can I also use an OBS plug-in to control the camera movements as well? All three functions would be through a single cat 6 cable.

A: Yes the AViPAS AV-1281 has been successfully controlled with the OBS PTZ Plugin. Avipas advises for the AV-1281, you would need to change the UDP port from 1259 to 5678 (reboot after save the change). Otherwise, it won't connect.

Q: 7. Can I use the Avipas 1280 with propresenter?

A: Yes you can.

Q: 8. Can the camera's IP address be set manually to fit our network?

A: Yes, that should be possible.

Q: 9. Can this camera be powered over it's Ethernet port?

A: yes this is a POE ptz and hence can be powered via POE (power over ethernet)

Q: 10. I plan to connect and control this camera with single ethernet cable using PoE. Can I use a 24V PoE injector with this camera or do I need a switch capable to 802.11af PoE?

A: Hi, you can either use a PoE switch or use an injector such as this: TP-Link TL-POE150S Power Over Ethernet Injector BH #TPTLPOE150S • MFR #TL-POE150S - https://www.bhphotovideo.com/c/product/885633-REG/TP_Link_TL_POE150S_Power_Over_Ethernet.html.