Tired of fiddling with the tiny knobs on your Zoom F6 field recorder in low light? These Bioluminescent Glow-in-the-Dark Replacement Knobs are designed to glow after exposure to light (especially UV light), enabling users to quickly find the track-control buttons on the recorder—in dimly lit environments. Simply remove the original knobs and press in these replacements.

For Zoom F6 Field Audio Recorder    Quickly Find Track Knobs in Low Light    Knobs Replace Factory Ones    Set of 6 Glow-in-the-Dark Knobs

Related Questions and Answers

Q: 1. What can you recommend for AC/DC Power and or adapter? This is for in house usage with the battery as back for any power failure.

A: Zoom AD-17 power adapter.

Q: 2. Is it possible to use 4 channels with an ambisonic mic while using the other 2 channels in some combination of lav/boom?

A: Thank you for your question. When using channels 1-4 in Ambisonic mode you still can use 5/6 independently for any combination of boom or lav mic setups.

Q: 3. Is this bus powered when used as a computer audio interface?

A: Yes, the F6 can be bus-powered in audio interface mode.

Q: 4. In latest firmware, can we quickly change to monitor one input? Also, can PFL change controls to mix vs rec gain?

A: Yes, using the PFL menus for each input on the Zoom F6 Multitrack Field Recorder, you can monitor one input at a time. Additionally, in 32-bit float mode, there is an option in the Input menu for "Track Knob," and if set to "Rec Level," the fader knobs will affect the recording level and can be adjusted while recording. If you select "Reference Level," then the fader knob position at the time you hit record will be the record level for the whole track.

Q: 5. What are the best settings to sync time code between the Zoom F6 and the JVC GY-HM850. ?Which should be used as the master and which the slave and what settings on each device? I've tried a number of variations and still cannot get it to work.

A: Thank you for your question. This will all depend on your frame rate and recording rate. Please give us a call 800.606.6969 so that we can better assist you

Q: 6. Can it generate timecode? I mean generate, not just sync

A: Yes the Zoom F6 generates time code.

Q: 7. Will the 32 -bit capability work within FCPX?

A: Adobe Premiere Pro, Adobe Audition 2015.4, Adobe Audition 2015.2.1 and Final Cut PRO X10.4.6 all support 32-bit float WAV Import. ested in MacOS 10.14 and higher.

Q: 8. How much current is required to record one track with 48v phantom at 96kHz/32bit for one hour?

A: Unfortunately that information has not been published regarding the F6.

Q: 9. NP 970 battery compatible with device Is it power with 970 battery

A: Yes, the Sony NP-F970 L-Series Info-Lithium Battery Pack - 6300mAh (B&H # SONPF970) is compatible for use with the Zoom F6 Multitrack Field Recorder.

Q: 10. What cable do I need to feed timecode from a Kinefinity Mavo LF (compatible with Arri Alexa TC In/Out port) 5 pin Lemo into the Zomm F6?

A: thank you for your question. you can use the BH #RECATCIPL cable to pass timecode from the Mavo to the F6