Sporting a clean and sophisticated look, the Lian Li A3-mATX Mini-Tower Case in white saves room on your desktop or entertainment center. For builders looking for a full, robust experience in a smaller form factor, the A3-mATX offers support for resource-hungry components without compromising performance.

Designed to leverage every inch of its compact design, the A3-mATX supports Mini-ITX and Micro-ATX motherboards as well as ATX power supplies. Four expansion slots accommodate graphics cards up to 16.3" in length and there is 6.4" of clearance for CPU coolers. While the A3-mATX sports a breathable design, up to ten 120mm fans or a 360mm radiator may be installed to enhance airflow and balance thermal performance. Connect essential devices such as controllers and external drives to the two USB-A ports and one USB-C port. Separate 3.5mm audio output and microphone input jacks enable easy communication for conference calls or gaming.

Micro-ATX and Mini-ITX Support    Steel Frame & Steel Mesh Side Panels    4 x Expansion Slots    Up to 10 x 120mm Fans    2 x USB-A 3.1 Gen 1, Audio In/Out    1 x USB-C 3.1 Gen 1    Support for Liquid Cooling Systems    Supports GPUs up to 16.3" Long    Bottom Dust Filter

With its relocatable PSU bracket, the A3-mATX allows you to build a PC tailored to your needs. All the panels (sides and top) are removable, giving you a clean 360° view of your internals, and the case can accommodate large components.

The A3-mATX provides three drive bays to meet storage needs in a comprehensive build. The removable SSD tray uses the same mounting point as the PSU bracket and can be relocated as needed. The bottom of the case can hold one SSD or HDD.

Combining the design of Daniel Hansen from DAN Cases with Lian Li's manufacturing prowess, the collaboration brings the A3-mATX to life.

Related Questions and Answers

Q: 1. Does this battery work with the Core SWX FLEET Quantum 4-Position Charger with Touchscreen Color LCD v mount charger ?

A: Yes, the Core SWX FLEET Quantum 4-Position Charger can charge the Core SWX Nano XL battery.

Q: 2. Can this scanner scan at a resolution of 600 x 600 dpi?

A: Yes, it can.

Q: 3. Will the Core SWX XL battery charge on a older Anton Bauer charger?

A: Older Anton Bauer chargers like the Anton/Bauer TWIN Simultaneous Charger for Gold Mount Batteries can be an issue with third-party batteries like the Core SWX Nano XL 178Wh Mini Li-Ion Battery (Gold Mount) because of the chip communication the charger has before charging. A newer charger like the Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount) is much more forgiving with third-party batteries. See the link below: https://bhpho.to/3sxixuo

Q: 4. Will these charge on an Anton Bauer brand charger?

A: Yes, the BLUESHAPE GRANITE MINI Gold Mount Batteries are compatible with Anton Bauer Gold-Mount charging units.

Q: 5. Can someone clarify what this product is? The A3/A3 Pro manual says The A3 can be upgraded to the a3 Pro by installing two upgrade kits. The A3 Pro's three GPS unites and IMUs add triple modular redundancy...... So if this is just an upgrade kit, and not the A3 Pro, then the upgrade kit costs more than the base unit, even though it doesn't include the flight controller??? Or is the actually the A3 Pro which does NOT require the A3 base unit or......

A: This is the upgrade kit that includes the extra IMU's and compass to add on to to the craft.

Q: 6. Can this battery be recharged with a D-Tap battery charger?

A: Hello Dominic, I confirm they can be charged from DTap.Pietro

Q: 7. Would this be ideal for taking photos of Niagra Falls?

A: Should work fine, assuming your phone fits and you can close the case completely.

Q: 8. We're using the Wookong on our X8 UAV and continue to have flight control issues. We will see large altitude changes when we stop at the end of a move. It is my understanding that the Freefly Synapse has solved a lot of the wonky-ness like that. Do you have any idea if the A3 solves any of that type of level flight issue?

A: The A3 system should fix any issues you have with a precise GPS location lock. Shortly, we will also have the A3 Pro, and this provides better accuracy since two extra IMU's and GPS compasses are added on.

Q: 9. Would one be able to use this light pad to trace accurate sketches onto 140 lb and 300 lb weight watercolor paper?

A: The reflecta A3 LED Light Pad will work with tracing paper but 300lb seems very thick. So might not be transparent enough for tracing.

Q: 10. What chargers are compatible with the gold mount granite mini's?

A: This battery can be charged through its D-Tap Port. For that you can use the BLUESHAPE D-Tap Battery Charger (4.5A), B&H # BLBLSCDT45. It will also work with most standard Gold Mount Chargers, such as Watson Pro Dual Position Li-Ion Simultaneous Battery Charger (Gold Mount), B&H # WACAM2E. B&H # BLBLSCDT45 - https://bhpho.to/2ARUs3P B&H # WACAM2E - https://bhpho.to/2RTH7lf