Step into the world of enthusiast PC building with the white Lian Li SUP01 ATX Mid-Tower Case and enjoy all the benefits modular cases have to offer. Featuring a stand-up platform design, integrated RGB illumination strips, and plenty of space for fans and system storage, the SUP01 turns your system into the centerpiece of your gaming room.

To promote airflow, the steel frame of the SUP01 offers removable mesh-metal panels on all sides except the side with tempered glass. With an adjustable interior, the SUP01 easily fits your ATX, Micro-ATX, and ITX motherboards, with room for up to ten 120mm or nine 140mm fans comfortably, as well as liquid-cooling radiators. Multiple locations allow you to install a wide range of 3.5 and 2.5" storage drives within the secondary chamber, behind the motherboard tray, and on the fan mounting bracket. Seven expansion slots allow you to install a variety of graphics and utility cards up to 15.7" long, with the option to place the graphics card vertically with the included PCIe 4.0 extension. The I/O panel includes two USB-A and one USB-C 3.2 Gen 1 port, perfect for connecting headsets, hard drives, cameras, and more.

ATX, Micro-ATX & Mini-ITX Support    Steel Frame & Tempered Glass Side Panel    2 x 2.5/3.5" Drive Trays    7 x Expansion Slots    2 x USB-A 3.2 Gen 1, 1 x USB-C 3.2 Gen 1    3 x 120mm PWM Fans    Supports GPUs up to 15.7"    Supports CPU Coolers up to 3.47"    Supports ATX PSUs up to 8.6"    PCIe 4.0 Extension

Installing the GPU at the front is achieved with the help of the included 510mm PCIe 4.0 riser cable, which features a customizable ARGB light strip. The GPU bracket is designed for vertical and horizontal adjustment to accommodate GPUs of different lengths and sizes.

The PSU shroud houses a hard drive cage with two trays for SSDs or HDDs. It can be removed to provide additional cable routing space. Additionally, two SSD mounting positions are located in the main chamber above the PSU shroud.

On the front of the SUP01, there is easy access to lighting effects control for the ARGB strips wrapping around the top left/front PSU shroud and on the PCIe riser bracket. Adjust the six lighting modes to your preference.

The SUP01 focuses on user-friendly cable organization features to streamline the building process. ESP cable clips and multiple straps on the back of the motherboard tray facilitate seamless cable routing without blocking the rear I/O ports. Clips and a rubber grommet around the PSU shroud provide a tidy solution for GPU signal cable (HDMI/DP) routing.

Related Questions and Answers

Q: 1. Will this A1 battery works on A10?

A: Yes, this will work in the A10. You will not get the faster recharge time and the longer battery life that the new battery offers. But it will definitely work.

Q: 2. Is the Tokina atx-m 23mm f/1.4 weather sealed / resistant?

A: The Tokina atx-m 23mm f/1.4 Lens for FUJIFILM X is not weather sealed.

Q: 3. Does this lens come with the magnetic filter?

A: No, this lens does not come with a magnetic filter.

Q: 4. I read somewhere that Fuji was quite protective of their lens design protocol. Has this changed? Did Tokina reverse-engineer Fuji's protocol?

A: Yes. In this particular case, Kenko-Tokina has licensed the communication/AF protocols from Fujifilm. This is information sourced through the web, from an interview by DPReview with Fujifilm's general manager of their Optical Device and Electronic Imaging Products Division. See those articles here: https://bit.ly/3azG1Tl https://bit.ly/3j1DmFL

Q: 5. This lens is supported from Fujifilm exlusively with the firmware correct? How do you go about updating the firmware?

A: Instructions, provided by FUJIFILM, to updates firmware on lenses can be viewed by following this link: https://bhpho.to/3UqdbNj

Q: 6. Can this A1 battery be used in the new A1X flash?

A: Yes.

Q: 7. Would this 33mm Tokina lens automatically activate the correct OVF frame line on a Fuji X-Pro1?

A: The Tokina atx-m 23mm f/1.4 Lens for FUJIFILM X will not communicate the focal length to the X-Pro1 camera. You would need to set the focal length manually in the camera in order to have frame lines in the OVF.

Q: 8. How can it be place it in bypass mode?

A: Thank you for your inquiry. To correctly put the Symmetra LX into bypass please follow the following guide. https://www.apc.com/us/en/faqs/FA157468/

Q: 9. Profoto A1: Does it charge via USB or require a separate charger? If it requires a separate charger, is it included with the A1? Does the Air Remote TTL-C for the Profoto B1 also control the A1?

A: It comes with a battery charger. Simply remove the battery from the front of the A1 and place it on the charger. The Air remote does control the A1. When the A1 is off camera it performs like every other Profoto flash.

Q: 10. Is this lens identical to the viltrox 35mm F1.4? they both have the same lens elements (10 Elements in 9 Groups) and look very much the same in the photos, but this tokina is much pricier.

A: It's hard to say until the lens is released. It does look very identical but it's possible they can perform differently.