One of the coolest ways to power your devices is with the purple-colored Uno 65W 3-Port USB Charger from UGREEN. As effective as it is cute, the Uno can provide your devices with up to 65W of power, recharging from the Uno's single USB-A and dual USB-C ports. Unlike many chargers, the Uno features a cute robot design that will make you want to keep it on your desk instead of inside a drawer. The robot looks like it's wearing headphones and expresses itself through a built-in LED screen face that will let you know when charging is finished. When not in use, insert Uno's two-prong plug into the included magnetic feet and keep it nearby on your desk or the back of your laptop.

Up to 65W of Power Output    1 x USB-A & 2 x USB-C Ports    Cute Robot Design with Magnetic Feet    Charging Status via LED Screen Face    Thermal Guard Temperature Detection    238+ Temperature Readings per Second    Guards Against Short Circuits    Overload & Overvoltage Protection

While Uno can provide your devices with a total of 65W of power, that all depends on which ports are being used and in what combination. Below are all the charging configurations possible with the Uno and their specific power outputs.

• USB-C1: Up to 65W
• USB-C2: Up to 30W
• USB-A: Up to 22.5W
• USB-C1 & USB-C2: Up to 45W & 20W
• USB-C1 & USB-A: Up to 45W & 18W
• USB-C2 & USB-A: Up to 15W shared
• USB-C1, USB-C2 & USB-A: Up to 45W, 7.5W & 7.5W

Inside Uno's cube-shaped body is packed a host of circuitry to help keep your devices safe as they recharge. Uno's Thermal Guard tech offers always-on temperature detection, performing over 238 temperature readings every second. In addition to Thermal Guard, Uno has built-in protection against short circuits, overload, and overvoltage.

Related Questions and Answers

Q: 1. Does this card require a USB C header on a Windows PC motherboard?

A: It does not require a USB Type-C header. The requirements, are: PCIe slot, macOS 10.10 or 10.12 or later, Windows 10 or later, or Linux Kernel 5.1.9+ or later (LTS version only).

Q: 2. Can I use it with Bebob batteries?

A: We are afraid not. This charger is specifically for IDX Endura Batteries with a D-Tap Advanced Port.

Q: 3. What expansion chasis's are recommended with this USB-C 3.2 card. Can it be connected to a Thunderbolt 2 - I assume NOT? Eg: OWC ThunderBay 4. This is USB 3.2 Gen 2x2 N/A USB 3.2 SuperSpeed USB 20Gbps 20Gbps so are there any Expansion Chassis's that can use this and also can the MP 5,3 in the slower pcie slots use all this speed?

A: It is not compatible with Thunderbolt 3. It is compatible with all USB standards. One example with USB 3.2 is https://www.bhphotovideo.com/c/product/1496990-REG/oyen_digital_3r2_2c_m_mobius_usb_c_raid_2_bay.html

Q: 4. Is it possible to charge a battery with this at the same time when a camera is using the same battery?

A: We are not aware of this product offering such functionality. It is a charger only, as you describe it would be an AC Power supply for the camera the battery sits in and we do no know if it offers such a feature.

Q: 5. Can this battery SUPPLY power to other devices via the USB-C charging port? That would be very convenient.

A: The USB-C port on the Jupio EN-EL15C Ultra C Battery with USB-C Port (2400mAh) is for charging only--it can't supply power to any other device using that port.

Q: 6. hi, how long would it take for this charger to charge a extra duo 190, as per picture n4? thanks

A: 7:20 according to their website. I have the 98w and their 4:20 time is accurate however I never run my batts down to 0 and my charge time is quicker as a result.

Q: 7. is that work for Yuneec H520E batteries ?

A: Yes, the YUNEEC DY5 Dual-Port Rapid Charger/Balancer for H520 LiPo Batteries is compatible with batteries for the YUNEEC H520E.

Q: 8. Does this work with Apple Silicon computers? (via expansion chassis)

A: Yes, the Sonnet Allegro 4-Port USB 3.2 Gen 2 Type-C PCIe Card works with Apple Silicon computers via expansion chassis.

Q: 9. Will this safely charge SL2 batteries as well?

A: The Leica BC-SCL6 USB-C Dual Charger can charge the Leica BP-SCL6 Lithium-Ion Battery (8.4V, 2200mAh), which is used in the Leica SL2 and SL3 Mirrorless Cameras.

Q: 10. Can this card be used on the new Mac Pro (2019)?

A: Yes this would work perfectly in the MacPro tower (2019 model).