Do it all with Sesh ANC from Skullcandy, true wireless earbuds with all-day battery capacity, fully waterproof IP67 construction, and a Fit Grip design that keeps your buds in place. With adjustable active noise canceling and Stay-Aware mode, you can tune out unwanted noises while keeping you fully aware of your surroundings.

The 12mm drivers provide powerful sound, and you can customize every aspect of your earbud sound response with three selectable EQ presets (Music, Bass Boost, and Podcast), adjustable 5-band EQ control, and Personal Sound by Mimi—which caters your earbud response to your unique ears—all from the Skullcandy app. Each earbud offers up to an impressive 12 hours of battery life, but with the charging case, you can get a whopping 48 hours of playback (ANC off). With a rapid charge, you can squeeze an extra two hours of playback with a mere 10 minutes of charging. Sesh ANC includes a charging case, three pairs of Ear Gels (small, medium, and large), and a USB-C charging cable.

For Listening On the Move and at Home    12mm Drivers for Potent Sound    Fit Grip Keeps Earbuds in Place    Active Noise Cancelation (ANC)    Adjustable Stay-Aware Mode    IP67 Sweat, Water, and Dust Protection    3 Preset EQ Modes and Custom 5-Band EQ    Customization with Skullcandy App    Up to 48 Hours of Playback with Case    Includes Case, Ear Gels, and USB-C Cable

Go ahead and venture out into the wide world—Sesh ANC can handle the toughest environments. With IP67 protection, these earbuds will stand up to everything from blizzards to dust storms. You can count on it to stay put too, thank to the ultra-comfortable Fit Grip design that prevents the earbuds from falling out, even during intense workouts.

Shout out to the world and lose yourself in your music, movies, and podcasts with adjustable 4-mic digital active noise canceling. If you'd rather stay tuned to your surroundings, adjustable Stay-Aware mode lets you hear the world while enjoying your favorite media.

We can't always play, unfortunately. Whether you need to work or just kick back, features like Google Fast Pair, multipoint pairing, and Spotify Tap all make life off your board outside the gym a little bit easier and a whole lot better.

With the Skullcandy app for iOS and Android, you can:

• Customize your ANC settings
• Adjust 5-band EQ
• Select between the three EQ presets
• Customize button functions
• Engage low-latency audio mode
• Activate Bluetooth LE mode
• Utilize Personal Sound by Mimi for custom sound profiles
• Turn multipoint pairing on or off
• Turn your earbuds into a camera remote with Take Photo feature

Related Questions and Answers

Q: 1. I am currently using a nikon d700 with battery grip and a tamron 70-200mm f 2.8 would this bag fit this with a extra lens and battery or would it be too tight?

A: HI Ryan...I love this bag...but as others have said...it may be tight but it certainly is manageable! You will love this bag! I sure do!

Q: 2. Can these be used with other IEMs other than the Shure Brand?

A: You can use the Shure SE215 Pro Sound-Isolating Earphones Kit with RMCE-TW2 True Wireless Adapter (Clear) with any IEM body pack receiver via the 3.5mm cable. However, the TW2 Bluetooth adapters won't be compatible with the P3RA receiver as different wireless technologies are used.

Q: 3. how well does this work with a audio system... as in does it produce a lot of feedback?

A: It will not produce feedback in and of itself. It is an improvement over the recorder's built-in mic.

Q: 4. Is this bag waterproof?

A: No, the Lowepro Passport Sling III, is not waterproof.

Q: 5. If I have a 70V distributed system and want to only control volume for one zone, can I use this as a speaker level input/output? Setup is one 120W, 70V amp with 4 70V attenuators to split into 'zones'. We would like to install the noise control after just one attenuator so we can still set base volume level (or even use this to replace a single attenuator). Trying to avoid having to use multiple amps and an expensive mixer. Thanks!

A: Hi Chris,first please accept my apologies for late answer but I hope it will help.As you describe how you want to use ANS501 ,it will not work because you cant control 70V signal with it.ANS501 accept only line input(balanced or unbalanced) so you have to put it between signal source(for eg. cd player,tuner) and 70V amp.You said you would like to install ASN501 after attenuator -this is also not possible.ANS501 electronically adjust a level of the background music in places where ambient noise levels are continuously changing so in case that you cant hear good the BGM or page announcement you have to turn att in the room louder and latter turn att lower .With ANS501 you dont have to do this because it raise up the music level automatically( microphone sensor module measure ambient noise level) ) in the zone which supply your 70V amp no matter how many 70V att you have.ANS501 raise up input signal to 70V amp and sound is higher no matter in which positions are 70V att.(except in off position-no sound). Conclusion is that you cant control 70V signal with ANS501 and you cant use it to control speaker level input/output (only when you have system with active speakers).BRKresimir PoslekAudio Video Medij

Q: 6. Will Canon EOS 7D with 15-85 IS + 50MM 1.8+ Speedlite 600EX-RT + Extra Battery will fit into it?

A: I fit a camera of comparable size and lenses in the bag - Nikon D800. You'll be able to fit the camera and either an additional lens OR a speedlite inside the bag. There is an additional pouch outside the bag. I fit a water bottle in this pouch. It's not secure though so you may not be comfortable placing expensive equipment in it. Additionally, the padded liner inside can be removed to create more space. I take out the padding when I'm shooting with a battery pack/grip on.

Q: 7. Do they come with a mic or can be attached to it?

A: These noise-isolating headphones are monitors only, and designed to be used when critical listening is required in a loud environment, and a mic cannot be attached to it

Q: 8. Will this work with a standard mic input on a camcorder?

A: Yes - but only if the camcorder supplies plug-in power

Q: 9. Is this bag deep enough to hold a canon 1dx body standing up like pictured? It is similar to a smaller body liek a 5d with a grip but still pretty large. Thanks for help in advance

A: I'm sorry, no, the 1DX series camera, will not fit in this bag.

Q: 10. Can it accomodate a Nikon D810 with an attached 24-70?

A: I wouldn't recommend it. That combo is 12 inches long and would take up most of the room in the bag lengthwise with the dividers removed. You would have no room for any extra lenses or a flash, only room for an extra battery and a filter or two. If you only need this one lens and you don't carry a flash, it will work. But I recommend something larger for this combo. Try the Lowepro website. They have a bag finder app that matches your equipment to the bag(s) that will accommodate it. Good luck.