Sip Enabled Video Surveillance Cameras

Advanced Network Devices Informacast-enabled Ip Zone Controller

Product Code: ga161160
Availability: In Stock

$1,818.00 $2,327.04

Qty

0 reviews Write a review

Description
Reviews (0)

Connect non-network devices to your network with the InformaCast-Enabled IP Zone Controller from Advanced Network Devices. This controller interacts directly with your organization's mass notification system thanks to its peripheral support and acts as a hub for a variety of devices. The unit supports SIP and has its own built-in web server, it is also enabled to receive InformaCast broadcasts. The controller includes the ClockWise Campus software.

Peripheral Integration Supports SIP Built-In Web Server InformaCast Enabled

General
Compatibility	Not Specified by Manufacturer
Inputs / Outputs
Audio I/O	1x 1/8" / 3.5 mm Line Input 1x 1/8" / 3.5 mm Line Output
Ethernet	10/100 Mb/s
Audio Output	8 W / 16 W
Speaker	8 Ohms
Protocols	SIP IPv4 IPv6 802.1X HTTP SLP TFTP NTP SNMPV1 SNMPV2c DHCP IGMP ICMP TCP/IP LLDP-MED UDP MDNS MDNS-SD
Interface	2 GPI 1 GPO: Contact Closure or 12 VDC
Power
Power Source	PoE
Power Input	PoE (IEEE802.3af) 15.4 W or PoE+ (IEEE802.3at) 30 W
Physical
Mounting	4x Unthreaded Holes
Certifications	ISO
Operating Conditions	34 to 122°F / 1 to 50°C at 0 to 95% Humidity
Cable Length	Not Specified by Manufacturer
Dimensions	8 x 6 x 1.25" / 20.3 x 15.2 x 3.17 cm
Weight	1 lb / 0.5 kg

Related Questions and Answers

Q: 1. Is the iris control smooth, or is it a series of click presets?

A: The smoothness of the Iris should depend on the camera you are using with this unit and how it is set up. However this unit should allow you to go from f-stop to f-stop just as you would with any camera.

Q: 2. Can this controller be used with the Bird Dog P200?

A: We can only say that the Birddog controller for Birddog cameras would be the correct choice and totally compatible with Birddog cameras. See this link https://bhpho.to/3vblIWh

Q: 3. Does this support Panasonic AW-HEx control?

A: The AIDA Imaging VISCA Serial & IP PTZ Camera Controller will accept control from Panasonic AW-HE cameras that provide RS-422 or RS-232 output. The wiring pinouts should match the camera and the controller.

Q: 4. Can you pan and tilt while zooming?

A: Yes, you can plan and tilt while zooming.

Q: 5. Is it possible to control some cameras with RS-232 and others with VISCA over IP from the same joystick?

A: Yes, you can work with the AIDA Imaging VISCA Serial & IP PTZ Camera Controller and control cameras via RS-232 connections as well as Visca over IP simultaneously.

Q: 6. Can this controller be used to control other brands PTZ cameras? Eg Panasonic AW-UE70

A: We would be of the opinion that no, it would not be able to operate other brands of PTZ cameras. If you have a Panasonic AW-EU70 we would suggest using the Panasonic Remote Camera Controller B&H # PAAWRP50.

Q: 7. Can the tilt control be reversed?

A: No it cannot.

Q: 8. Will this work with the JVC KY-PZ100?

A: Yes, the JVC KY-PZ100 is compatible with the AIDA Imaging VISCA Serial & IP PTZ Camera Controller.

Q: 9. Just bought 3104se for av-1081. IF i buy a 1281 can I use both 10&12-81 on the 3104. 1281 has in&out?

A: Yes, the AViPAS 4D Serial Joystick Controller (No IP Function) would allow you to daisy chain from the 1281 ( Dual port) to your 1081 ( Single port) camera.

Q: 10. does this controller allow you to power down and power up ptzs?

A: The AIDA Imaging VISCA Serial & IP PTZ Camera Controller cannot be used to power down or power up PTZ cameras.

There are no reviews for this product.