The 4K HDMI 4x4 Matrix & Video Wall Controller from Ocean Matrix functions as both a matrix switcher and a video wall controller in a single device. It has four HDMI inputs and four HDMI outputs that support up to 4K60 video. Seamlessly switch between sources using the onboard button controls, IR remote, RS-232 port, or TCP/IP port. A web browser interface module can configure the matrix in both standalone and third-party control ecosystems. Ten video wall modes make for flexible integration with your preexisting display configuration.

4 x HDMI Inputs, 4 x HDMI Outputs    Supports up to 4K60 Video Resolutions    Push-Button, IR, RS-232, TCP/IP Control    10 Video Wall Modes, EDID Management    Built-In Downscaling via HDMI Output    HDCP 2.2/1.4 Compliant

• HDMI 2.0 and HDCP 2.2/1.4 compliant
• HDMI output supports upscaling or downscaling to any resolution up to DCI 4K60
• Supports LPCM, Dolby Digital, Dolby Digital Plus, DTS, Dolby Ture HD, and DTS-HD Master Audio
• Built-in EDID management
• Control and configure the matrix through the web interface module
• Control via front panel buttons, IR remote, RS-232, and TCP/IP

Related Questions and Answers

Q: 1. Can you change the antennas on the Pyro S 4K? and if it is possible that in some update it will be implemented?

A: The antennas on the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System are not permanently installed and are removeable. We are not aware of any updates to the antennas at this time.

Q: 2. Would you suggest Pyro S over Hollyland Mars series, and if yes, why?

A: Just purchased Pyro S from B&H and chose it over Mars for the following reasons: less latency, longer distance coverage, auto frequency hopping for best signal and up to 4 receivers. I used it for an audience cutaway shot at a livestreaming conference and it worked flawlessly with a Blackmagic switcher.

Q: 3. Will the Pyro S transmit continuously 24/7 if left on?

A: As long as the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is connected to power source the kit will continue to transmit.

Q: 4. Would this hood fit on a Canon R5?

A: No it will not. the LCD screen on the Canon R5 is significantly smaller than the LCD screen on the Pocket Cinema Cameras. This hood will be too large for the Canon R5

Q: 5. Does the Pyro receiver have an SDI output? (Your specs say the transmitter has SDI output, but that does not make sense.)

A: Yes, the receiver on the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System has an SDI output also. The purpose of the transmitter having SDI outputs is for loop out purposes like using an external display with the transmitting camera.

Q: 6. Does it fit dsmc3 monitor

A: No, the Ocean Video GG70 GlareGuard Sun Hood for RED Touch 7" Monitors is not compatible with the DSMC3 camera monitors.

Q: 7. We bought it and tried installing it on the Red Ultra Bright monitor, but it does not fit. The top screw holes of the sun guard are not aligned with the monitor screw holes and the sun guard seems too small. Are we missing something because in the item description it is said that it fit the Red Ultra Bright monitor?

A: The Ocean Video GG70 GlareGuard Sun Hood for RED Touch 7" Monitors. Is not compatible with the 7” ultra bright monitor it has different mounting holes so the original Glare Guard 7” monitor shade doesn’t fit. Currently there is no solution from Ocean Video.

Q: 8. To how many receivers and apps can the trasmitter transmit simultaneously. This is a question for Hollyland?

A: When the transmitter from the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is set to broadcast mode, the a single transmitter can output to up to four receivers and two smart devices running the app.

Q: 9. Hello. How much do one of these monolights weigh?Thanks.

A: Each Monolight weighs about 4.5 lbs.

Q: 10. Will this take HDMI 1080p 29.97 in and still output 1080p 29.97 SDI?

A: Yes, the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System will receive and produce the same signal it receives.