Sustainably maintain printer ink supply with the magenta 735 Return Program Toner Cartridge by Lexmark. These return cartridges are designed for use with select Lexmark color laser printers and have a standard page yield of 5000. Enjoy higher print and image quality with Unison Toner. Lexmark's Return Cartridge program saves costs and refills cartridges for a sustainable ink supply solution.

For Select Lexmark Color Laser Printers    5000 Standard Page Yield    Unison Toner for High Image Quality    Cartridge Collection Program Eligable

• Lexmark CS737dze
• Lexmark CX730de
• Lexmark CX735adse
• Lexmark CX737adzse
• Lexmark CS735de
• Lexmark CS730de

Related Questions and Answers

Q: 1. I have had problems with 35mm slide pages , years ago, where the emulsion would stick to the page. Does this type prevent that?

A: I have not had that problem with these pages. I keep my slides in a room that is usually 70 degrees F with an air conditioner to keep humidity down in summer, so that may help. These pages are specifically designed to be archival, however, so unless you subject them to unusually harsh treatment they should not cause any sticking. I have been using them for over 25 years.

Q: 2. HOW DOES THIS WORK WITH HEARUNG AID?

A: This works well with many hearing aids. It is designed to send the audio signal to induction loops for use wit hearing aids.

Q: 3. can everyone else hear the t.v. while this is in use? if yes, is there a way to turn it so it goes only to the earphones?

A: Yes, they have separate volume controls. You would turn off the volume on the TV and still be able to listen through your headphones.

Q: 4. How does this work with hearing aid?

A: The Flex Receiver outputs the audio signal to wired headphones, such as the included MX 475 Earphones, or an induction loop for use with a hearing aid. Please visit the Sennheiser website to see the detailed instruction manual that discusses connecting to an induction loop. Your hearing aid must be induction coil/loop (t-coil) compatible. This accessory would be necessary:Sennheiser EZT 3012 Induction Neck Loop for ReceiversB&H # SEEZT3012

Q: 5. can you get a replacement knob for the center level? The knob is a bit short and difficult to reach. A longer knob would work better. Can I replace the one that is there and if so do you have a suggestion?

A: For individual parts (not accessories), you will need to contact the manufacturer: https://www.magnustripods.com/contact-us

Q: 6. Is this pan handle compatible with the geekoto CT32X Gravity 85 tripod?

A: No, the Magnus Telescoping Pan Handle for VT-5000/6000 is not compatible with the GEEKOTO CT32X Gravity 85 Tripod.

Q: 7. Is the Sennheiser Supplemental Receiver for Flex 5000 System compatible with the RS 5000 system?

A: Yes, it is. They use the same TR 5000 transmitter/charger.

Q: 8. What is the purpose of the retractable tie cable?

A: The Magnus REX VT-5000 2-Stage Video Tripod with Fluid Head features a retractable cable tie, which can be used to hold the legs in place, when folded up and transporting the tripod.

Q: 9. how many watts per channel?

A: Rated Power: 2ch x 2 Ω: 3,230 W 20ms repetitive burst / 2,530 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 1,985 W 20ms repetitive burst / 1,700 W 1% THD / 1,470 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,175 W 20ms repetitive burst / 1,025 W 1% THD / 880 W 0.15% THD, both channels driven @ 1 kHz RMS Power 1 x 2,900 W at 2 Ω 1 x 1,780 W at 4 Ω 1 x 975 W at 8 Ω 2 x 2,525 W at 2 Ω 2 x 1,510 W at 4 Ω 2 x 890 W at 8 Ω Minimum Load Impedance 2 Ω

Q: 10. Does this camera work using a Hasselblad x2d as the digital back? What adapters would integrate this camera with that back?

A: The Hasselblad X2D Medium Format Mirrorless Camera cannot be used as a digital back for the Cambo WRS-5000 Technical Camera (Rosewood). You could use the Cambo ACTUS-XCD View Camera Body with Hasselblad XCD Bayonet Mount (Black), BH #CAACTUSCAMB, with the Hasselblad X2D Medium Format Mirrorless Camera.