The nickel Shure AD2/N8SN is a digital handheld wireless microphone transmitter compatible with Axient Digital series receivers. The AD2/N8SN comes equipped with a Nexadyne 8/S dynamic supercardioid capsule, featuring an innovative Revonic dual-transducer design that uses two separate, but interdependent sets of diaphragms, voice coils, and magnets. This unique technology gives this dynamic mic a condenser-like clarity with a crisp, yet natural high-end and plenty of detail—allowing vocalists to worry less about mic technique and instead focus on delivering powerful performances. The supercardioid polar pattern delivers tight directionality, high gain before feedback, and enhanced rejection of off-axis sound.

The transmitter operates in an ultrawide 140 MHz UHF bandwidth with selectable 2/10/35mW RF output power and a transmission range up to 330'. It provides up to 8 hours of operation on two AA batteries and up to 9 hours with an SB900A lithium-ion rechargeable battery (available separately). With a durable, moisture-resistant, lightweight aluminum case, the AD2/N8SN transmitter delivers pristine audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options, making it ideal for high-profile, sound-reinforcement applications.

For Axient Digital Systems    Nexadyne 8/S Supercardioid Dynamic Mic    Shure Revonic Dual-Engine Transducer    Automatic Gain Adjustment    2/10/35mW RF Output Power    Mute Mode, Backlit LCD    Secure AES-256 Encryption    Networked Intelligent Charging    Interchangeable Capsule Design    9 Hours with SB900A Rechargeable Battery

• Shure's Nexadyne Revonic system is an innovative dynamic microphone design that uses two matched dynamic transducers, working in conjunction, to provide more opportunity for both greater sound quality and the rejection of unwanted signal.
• Wiring the transducers out-of-phase cancels mechanical vibration, so self-noise is actively zeroed out. This makes traditional pneumatic shockmounts unnecessary, and allows the transducers to be optimized for acoustic performance.
• Vocal performers will experience natural and vivid clarity when performing—enabled by a cartridge design that optimizes signal output acoustically, producing more of the desired sound source and less environmental and handling noise.
• Engineers will receive stronger and clearer output, resulting in fewer EQ corrections that are often necessary with other mics to retain vocal clarity within the mix.
• The supercardioid polar pattern provides tightly focused audio capture centered on the performer in front of the mic, reducing bleed from other sources for a clearer sound with substantially less feedback issues from on-stage monitors.
• The interchangeable capsule design allows you to replace the Nexadyne 8/S capsule with a Shure capsule that’s ideal for your application and simply screw it onto the transmitter—including the Nexadyne 8/C (cardioid), KSM8, SM58, Beta 58A, Beta 87A, and Beta 87C capsules.

• The AD2 quickly syncs with an Axient Digital wireless receiver at the touch of a button via infrared.
• Automatic Gain adjusts the mic input level for you.
• The power button conveniently doubles as mute switch, while preserving RF lock.
• Frequency and power lockout functions prevent accidental or unauthorized changes during events.
• A backlit LCD with easy-to-navigate menu and controls lets you quickly access frequency, group, and channel settings, along with mute and lock status, RF output, and remaining battery life.
• Offset function lets you balance mic levels when assigning multiple transmitters to a single receiver slot. Adjustment range: -12 to +21 dB.
• 2/10/35mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously.
• Two transmission modes: Standard, for optimal coverage and High-Density, for maximum system channel count and robust coverage.
• The mic element is protected by a dent-resistant grille, ensuring it survives the rigors of daily stage use.

• SB900A rechargeable battery (available separately) offers intelligent power management with precision metering in hours and minutes, along with zero memory effect.
• External charging contacts allow for docked battery charging.
• SBC220 two-bay and SBC840 eight-bay networked chargers (both available separately) allow for remote power monitoring via Shure’s Wireless Workbench software.

Related Questions and Answers

Q: 1. Will both the handheld mic and the Lav pair to any soundboard? Currently using a Behringer X32 Compatc.

A: The Sennheiser EW 135P G4 Camera-Mount Wireless Cardioid Handheld Microphone System does not include a lavalier microphone. The bodypack unit included with this system is the wireless receiver which comes with a camera-mount shoe adapter. The receiver can be connected to a Behringer X32 Compact Mixer using the included receiver output cable with the XLR connector. If you will also need similar wireless lavalier system, you can use the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System or the Sennheiser EW 122P G4 Camera-Mount Wireless Cardioid Lavalier Microphone System. Multiple system can be used simultaneously and each receiver can be connected to a separate input jack on the mixer.

Q: 2. Can a specific frequency be dialed in on this system or does it always auto scan for a clean frequency?

A: Yes, it is possible to select a specific transmitting frequency manually for the Sony UTX-P40 Wireless Plug-On Transmitter and wireless receiver instead of using the auto-scan feature for pairing the transmitter and receiver.

Q: 3. Hello, So with the combo BH #SEME2835SR16 MFR #EW-D ME2/835-S SET (R1-6) will it be possible to use them simultaneously ?

A: No. The Sennheiser EW-D ME2/835-S SET Digital Wireless Combo Microphone System includes the Sennheiser EW-D EM Digital Wireless Receiver which has a single channel so only one transmitter can be used at a time with the receiver. To use both transmitters simultaneously, you will need a second receiver.

Q: 4. WHAT RECEIVER DO I NEED FOR THIS?

A: Ideally you will get the EK500 receiver (for portable/camera work) or the EM500 for rack mount). It is also compatible with the 100 and 300 EW Evolution receivers, but in that case, not all frequencies of the transmitter will be available on the receiver. If you want it for camera work, this transmitter is also sold as a kit with a receiver, or as a kit with a receiver, body pack transmitter, MKE2 lav. Item# SEEW500BG4G1 and Item# SEEW500FILM1

Q: 5. Is this backwards compatible with previous generations of the same line of wireless mics?

A: Yes. Per the product feature page: Compatibility with Other Sony Wireless Systems The UWP-D transmitter can be used with a UWP Series or WL-800 Series receiver. A UWP Series or WL-800 Series transmitter can be used with a UWP-D receiver https://www.bhphotovideo.com/c/product/1484179-REG/sony_uwp_d22_14_uwp_d22_camera_mount_wireless_cardioid.html/overview

Q: 6. Can I use the handheld & lav mic at the same time or do i have to buy another receiver?

A: This combo set allows for either a handheld or a bodypack transmitter to be used one at a time. You would need a second receiver, for both to operate simultaneously, which is the Sennheiser EW-D EM Digital Wireless Receiver (R1-6: 520 to 576 MHz), BH #SEEWDEMR16.

Q: 7. Is this SKP 500 G4 plug-on transmitter compatible with the EK 100 G4 Receiver (instead of the EK 500), or with an older G3 receiver?

A: Yes, the SKP 500 G4 plug-on transmitter is compatible for use with the EK 100 G4 receiver or an older G3 receiver, but only if the components operate on the same frequency band.

Q: 8. Is the 1/4' output labeled Instrument out a line level output?

A: The manual shows the 1/4 inch output as -13 dBV into a 100K ohm load. With consumer line level at -10 dBV it's close but not quite line level.

Q: 9. Would I need another receiver to add an additional lav to the handheld mic version?

A: Yes. You have a few options for adding a lavalier microphone to the Sony UWP-D22 Camera-Mount Wireless Cardioid Handheld Microphone System - UC14: 470 to 542 MHz. The first option is to use an additional complete wireless lavalier system such as the Sony UWP-D21 Camera-Mount Wireless Omni Lavalier Microphone System - UC14: 470 to 542 MHz (B&H # SOUWPD2114). If you are using a separate wireless mic system, you can use the same frequency band or a different band since the two systems will be independent. Another option is to replace your existing single-channel receiver with the Sony URX-P41D Dual-Channel Camera-Mount Wireless Receiver - UC14: 470 to 542 MHz (B&H # SOURXP41D14) which will allow you to use two transmitters simultaneously with the same receiver, and purchase the Sony UTX-B40 Wireless Bodypack Transmitter with Omni Lavalier Mic - UC14: 470 to 542 MHz (B&H # SOUTXB4014) to use together with your existing Sony UTX-M40 Wireless Handheld Cardioid Microphone Transmitter from the UWP-D22 System. If you do want to use two transmitters simultaneously with the URX-P41D Dual-Channel Receiver, make sure that all components operate on the same frequency band.

Q: 10. Will this work with the Senheiser AVX Wireless system? I want to plug this into an MKH416 and record boom audio wirelessly into camera.

A: No, the Sennheiser SKP 500 G4 Pro Wireless Plug-On Transmitter is not compatible for use with the AVX system. The G4 series is a UHF system (this particular transmitter operates on the 470 to 558 MHz band) while the AVX series is a digital system that operates at 1.9 GHz. Sennheiser does not offer a plug-on transmitter for AVX. The G4 series system is a better option if you need to use a plug-on transmitter that can supply phantom power for your MKH416. The SKP 500 transmitter is available separately or as a complete system with the EK 500 transmitter -- Sennheiser EW 500 BOOM G4 Camera-Mount Wireless Plug-On Microphone System with No Mic - AW+: 470 to 558 MHz (B&H # SEEW500BG4AW).