Secure entryways in your facility with the Multi-Format Card Reader by Verkada. This reader supports multiple access card types and signals including high and low frequency. The LED communicates the entryway's status and provides feedback when access is requested. Take advantage of easy installation with the included single-gang and mullion mount.

Supports Multiple Access Card Types    LED Indicator    Easy Installation    Includes Single-Gang and Mullion Mount

• Low-frequency cards such as 37-bit Wiegand, 35-bit corporate and proximity cards
• High-frequency cards such as MiFare and DESFire credentials
• Mobile Bluetooth access via the Verkada Pass App

• The feedback LED on the top of the unit displays white, green, or red to indicate that the status of the unit and any associated badge scan events
• The 9 indicator LED lights display green or red feedback LEDs in response to successful and unsuccessful badge events or lock states
• Red status and pulsing feedback LEDs display when a lockdown scenario or event has been triggered in Verkada Command and that door cannot be unlocked

• LEDs provide information on the real-time connection status between the reader and the controller
• AD33 unit ships with five feet of wiring attached to the reader, allowing easy and simple installation and wiring
• Single-gang and mullion form factors are both included out of the box

Related Questions and Answers

Q: 1. Can you buy a longer cable for this? The cable that's included is far too short for my PC which sits underneath my desk.

A: If you are looking for a longer USB cable for the SanDisk ImageMate PRO USB Type-C Multi-Card Reader/Writer, if your computer has the newer (oval, bi-directional) USB-C port, then the SecureData Micro-USB 3.2 Gen 2 Male to USB Type-C Male Cable (1'), B&H # SEUSBMBCC, would be a 1 ft (30.5 cm) long cable, whereas the Rocstor USB 3.1 Gen 1 Type-C to Micro-USB Type-B Cable (3'), B&H # ROY10C146B1, would be a 3 ft (0.9 m) long cable. If your computer uses the older (rectangular, one-way) USB-A port, the NewerTech Micro-USB 3.0 Male to USB 3.0 Type-A Male Cable (18"), B&H # NEWTUSBAMB18, would be an 18-inch (45.7 cm) long cable, whereas the Pearstone USB 3.0 Type-A Male to Micro Type-B Male Cable (3'), B&H # PEUSB3AMIB3, would be a 3 ft (0.9 m) long cable.

Q: 2. How long is the included cable?

A: The cable for this device is approximately 6" long.

Q: 3. Can i write on the card with this device?

A: Yes, the Lexar Multi-Card 2-in-1 USB 3.0 Reader is a reader so you can read or write to a card.

Q: 4. Will this work with CompactFlash Type II UDMA 7?

A: Yes, the Xcellon USB Multi-Card Reader is compatible with CompactFlash Type II UDMA 7 memory cards.

Q: 5. Is it compatible with an android mobile?

A: Yes, the Lexar Professional Multi-Card 3-in-1 USB 3.0 Reader is compatible as long as your Android phone has a USB-C port.

Q: 6. Is it compatible with XQD card?

A: The Sabrent USB-C Multi-Card Reader is not compatible with XQD cards. This variant of the Sabrent USB-C Multi-Card Reader accepts SDXC, microSDXC, CFexpress Type B, and CFast 2.0 cards.

Q: 7. Does this work with a Cfast 2.0 card

A: The Lexar Professional Multi-Card 3-in-1 USB 3.0 Reader is only compatible with SDXC, microSDXC, and CompactFlash Type I memory cards--it isn't compatible with CFast memory cards.

Q: 8. Is the SD port a true UHSii port with both rows of contacts to read the card?

A: Xcellon USB Multi-Card Reader BH #XCCRM10 has a true UHS-II port with both rows of contacts to read the card.

Q: 9. how long is the cord?

A: In the box: USB 3.1 Gen 1 Micro-B to USB Type-C Cable (1.6') USB 3.1 Gen 1 Micro-B to USB Type-A Cable (1.6')

Q: 10. Does this work with a Cfexpress Type B card?

A: The Lexar Professional Multi-Card 3-in-1 USB 3.0 Reader will not read CFexpress Card Type B cards. Instead, get the Xcellon CFexpress Type B Card Reader, BH #XCCRCFX20.