The Shure SLXD2/N8S is a digital handheld wireless microphone transmitter compatible with SLX-D receivers. It comes equipped with a Nexadyne 8/S dynamic supercardioid capsule, featuring an innovative Revonic dual-transducer design that uses two separate, but interdependent sets of diaphragms, voice coils, and magnets. This unique technology gives this dynamic mic a condenser-like clarity with a crisp, yet natural high-end and plenty of detail—allowing vocalists to worry less about mic technique and instead focus on delivering powerful performances. The supercardioid polar pattern delivers tight directionality, high gain before feedback, and enhanced rejection of off-axis sound.

The system operates on a 44 MHz UHF tuning range with 1760 frequencies available. The transmitter features a selectable 1/10mW RF power output and a transmission range up to 330'. It provides up to 8 hours of operation on two AA batteries or a rechargeable SB903 battery pack (available separately).

The SLXD2/N8S handheld transmitter delivers crystal-clear, 24-bit digital audio quality and reliable RF performance in a lightweight, yet durable aluminum housing. It is well suited for use in small- to medium-sized venues and houses of worship and with A/V installations in a conference, educational, or corporate facilities.

For SLX-D Receivers    Nexadyne 8/S Supercardioid Dynamic Mic    Shure Revonic Dual-Engine Transducer    Interchangeable Mic Capsule System    1760 Auto-Scan Frequencies    1/10mW RF Output Power    LCD Screen    Compatible with 8 Hr Rechargeable SB903    Docked Recharging with Battery Inside

• The SLXD2 transmitter delivers clear, reliable 24-bit digital audio and comes with a Nexadyne 8/S mic capsule.
• Shure's Nexadyne Revonic system is an innovative dynamic microphone design that uses two matched dynamic transducers, working in conjunction, to provide more opportunity for both greater sound quality and the rejection of unwanted signal.
• Wiring the transducers out-of-phase cancels mechanical vibration, so self-noise is actively zeroed out. This makes traditional pneumatic shockmounts unnecessary, and allows the transducers to be optimized for acoustic performance.
• Vocal performers will experience natural and vivid clarity when performing—enabled by a cartridge design that optimizes signal output acoustically, producing more of the desired sound source and less environmental and handling noise.
• Engineers will receive stronger and clearer output, resulting in fewer EQ corrections that are often necessary with other mics to retain vocal clarity within the mix.
• The supercardioid polar pattern provides tightly focused audio capture centered on the performer in front of the mic, reducing bleed from other sources for a clearer sound with substantially less feedback issues from on-stage monitors.
• The interchangeable capsule design allows you to replace the Nexadyne 8/S capsule with a Shure capsule that’s ideal for your application and simply screw it onto the transmitter—including the Nexadyne 8/C (cardioid), KSM8, SM58, Beta 58A, Beta 87A, and Beta 87C.

• The unit quickly syncs with a wireless receiver via infrared at the touch of a button
• An easy-to-read LCD shows important information
• 1/10mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously

• The SLXD2 runs for up to 8 hours on two AA batteries or an SB903 rechargeable battery (available separately)
• The SB903 lithium-ion rechargeable battery offers convenient power management with zero memory effect and precision metering in hours and minutes on the transmitter's LCD screen
• The SBC203 dual-battery station charges two SB903 batteries at once—it fits the external contacts on the transmitter, so you don't have to remove the batteries to recharge

Related Questions and Answers

Q: 1. Does it works with Sk 100 G3 bodypack? (Ew 114 G3). The frequency range of my bodypack is 626-662 (B).

A: Yes, it seems to work on several of the frequencies.

Q: 2. Will this also work for a G2 EW-100? (the older model)

A: Yes, im fairly sure it will work. I used this part to replace the antenna on a Sennheiser receiver which I am guessing was the same model as yours the first EW100 that took two AA batteries instead of a single 9v. No problems as far as I can recall. Good luck.

Q: 3. Is this easy to replace and does it work on the G2 receiver?

A: This would not be compatible. Sennheiser does not list an available replacement antenna for the G2.

Q: 4. Hello Is the Sennheiser EW 100 G3 (558-626 MHz) compatible with this antenna?

A: Yes, the Sennheiser 578854 Antenna is compatible for use with for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz). The SK 100 G3 is the transmitter that is included with a Sennheiser EW 100 G3 Wireless Microphone System.

Q: 5. The frequency of Sony microphones is 548 - 607 MHZ. Can I use this system?

A: Although on a similar set of frequencies, the Godox TX3-XLR Plug-On Wireless Transmitter would not be compatible with Sony wireless microphone system components. Unless specified compatible, most wireless products use their own proprietary communication protocols and are not cross-compatible with other brands making similar products on similar frequency ranges. The Godox TX3-XLR Plug-On Wireless Transmitter is specified for use with the Godox WMicS1 Wireless Systems.

Q: 6. This antenna suits for the G3 transmitter also?

A: Yes they do, and they are very easy to replace. With the right tools 5 min

Q: 7. does it work with ew 100 G3 516-558?

A: This replacement antenna will work with the G3 series as well.

Q: 8. Does it work with ew 100 g3 receiver?

A: Yes, that's exactly that that antenna is designed for. It worked great!

Q: 9. Does this work with a G4-G band transmitter?

A: Yes, the Sennheiser 578854 Antenna for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz) is compatible for use with s Sennheiser SK 100 G4 Wireless Bodypack Transmitter that operates on the G frequency band which covers the range of 566 to 608 MHz.

Q: 10. Does this antenna works in any frequency of the G3 transmitter and receiver?

A: Ive had no issues. It works.