The Shure SLXD2/N8S is a digital handheld wireless microphone transmitter compatible with SLX-D receivers. It comes equipped with a Nexadyne 8/S dynamic supercardioid capsule, featuring an innovative Revonic dual-transducer design that uses two separate, but interdependent sets of diaphragms, voice coils, and magnets. This unique technology gives this dynamic mic a condenser-like clarity with a crisp, yet natural high-end and plenty of detail—allowing vocalists to worry less about mic technique and instead focus on delivering powerful performances. The supercardioid polar pattern delivers tight directionality, high gain before feedback, and enhanced rejection of off-axis sound.

The system operates on a 46 MHz UHF tuning range with 1840 frequencies available. The transmitter features a selectable 1/10mW RF power output and a transmission range up to 330'. It provides up to 8 hours of operation on two AA batteries or a rechargeable SB903 battery pack (available separately).

The SLXD2/N8S handheld transmitter delivers crystal-clear, 24-bit digital audio quality and reliable RF performance in a lightweight, yet durable aluminum housing. It is well suited for use in small- to medium-sized venues and houses of worship and with A/V installations in a conference, educational, or corporate facilities.

For SLX-D Receivers    Nexadyne 8/S Supercardioid Dynamic Mic    Shure Revonic Dual-Engine Transducer    Interchangeable Mic Capsule System    1840 Auto-Scan Frequencies    1/10mW RF Output Power    LCD Screen    Compatible with 8 Hr Rechargeable SB903    Docked Recharging with Battery Inside

• The SLXD2 transmitter delivers clear, reliable 24-bit digital audio and comes with a Nexadyne 8/S mic capsule.
• Shure's Nexadyne Revonic system is an innovative dynamic microphone design that uses two matched dynamic transducers, working in conjunction, to provide more opportunity for both greater sound quality and the rejection of unwanted signal.
• Wiring the transducers out-of-phase cancels mechanical vibration, so self-noise is actively zeroed out. This makes traditional pneumatic shockmounts unnecessary, and allows the transducers to be optimized for acoustic performance.
• Vocal performers will experience natural and vivid clarity when performing—enabled by a cartridge design that optimizes signal output acoustically, producing more of the desired sound source and less environmental and handling noise.
• Engineers will receive stronger and clearer output, resulting in fewer EQ corrections that are often necessary with other mics to retain vocal clarity within the mix.
• The supercardioid polar pattern provides tightly focused audio capture centered on the performer in front of the mic, reducing bleed from other sources for a clearer sound with substantially less feedback issues from on-stage monitors.
• The interchangeable capsule design allows you to replace the Nexadyne 8/S capsule with a Shure capsule that’s ideal for your application and simply screw it onto the transmitter—including the Nexadyne 8/C (cardioid), KSM8, SM58, Beta 58A, Beta 87A, and Beta 87C.

• The unit quickly syncs with a wireless receiver via infrared at the touch of a button
• An easy-to-read LCD shows important information
• 1/10mW selectable RF output power allows you to increase either the transmitter's range or the number of mics operating simultaneously

• The SLXD2 runs for up to 8 hours on two AA batteries or an SB903 rechargeable battery (available separately)
• The SB903 lithium-ion rechargeable battery offers convenient power management with zero memory effect and precision metering in hours and minutes on the transmitter's LCD screen
• The SBC203 dual-battery station charges two SB903 batteries at once—it fits the external contacts on the transmitter, so you don't have to remove the batteries to recharge

Related Questions and Answers

Q: 1. will this antenna work with the EK 100 G2 A receiver with the same frequency 518-554mhz?

A: Replaced the antenna on my G2 and it works great!

Q: 2. Does this work with a G4-G band transmitter?

A: Yes, the Sennheiser 578854 Antenna for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz) is compatible for use with s Sennheiser SK 100 G4 Wireless Bodypack Transmitter that operates on the G frequency band which covers the range of 566 to 608 MHz.

Q: 3. Will this work on the newer G3s?

A: Yes, I bought these antennas to replace some broken ones for ew100 G3, and they are worked good. I measured the length, check frequencies bandwidth with original A-band both are the same. Make sure to get the right bandwidth of the antennas, choose the right band. Easy to replace.B&H customers service is excellent.

Q: 4. Shure BLX 1288/CVL-J10 is this rack mountabled??

A: No it isn't. I used a 1U rack shelf and used command strips to secure it.

Q: 5. this ítem come come un a pack of two?

A: This is a single antenna.

Q: 6. does it work with ew 100 G3 516-558?

A: This replacement antenna will work with the G3 series as well.

Q: 7. Does it works with Sk 100 G3 bodypack? (Ew 114 G3). The frequency range of my bodypack is 626-662 (B).

A: Yes, it seems to work on several of the frequencies.

Q: 8. Will this work with the Senheiser AVX Wireless system? I want to plug this into an MKH416 and record boom audio wirelessly into camera.

A: No, the Sennheiser SKP 500 G4 Pro Wireless Plug-On Transmitter is not compatible for use with the AVX system. The G4 series is a UHF system (this particular transmitter operates on the 470 to 558 MHz band) while the AVX series is a digital system that operates at 1.9 GHz. Sennheiser does not offer a plug-on transmitter for AVX. The G4 series system is a better option if you need to use a plug-on transmitter that can supply phantom power for your MKH416. The SKP 500 transmitter is available separately or as a complete system with the EK 500 transmitter -- Sennheiser EW 500 BOOM G4 Camera-Mount Wireless Plug-On Microphone System with No Mic - AW+: 470 to 558 MHz (B&H # SEEW500BG4AW).

Q: 9. This antenna suits for the G3 transmitter also?

A: Yes they do, and they are very easy to replace. With the right tools 5 min

Q: 10. Does it work with ew 100 g3 receiver?

A: Yes, that's exactly that that antenna is designed for. It worked great!