Stereo Receiver 150 Watts Per Channel

Parasound New Classic 2125v2 2-channel Power Amplifier

Product Code: ga162541
Availability: In Stock

$2,997.00 $4,495.50

Qty

0 reviews Write a review

Description
Reviews (0)

Get THX certified power for your custom home theater installation with the New Classic 2125v2 2-Channel Power Amplifier from Parasound. The 2125v2 is a Class-AB amplifier, capable of delivering 150 watts per channel into 8 Ω with two channels driven, or up to 400 watts in bridged mono mode.

The straightforward design features gold-plated connectors with a stereo RCA line input and loop-through output as well as four binding post terminal pairs for stereo or bridged mono speaker output. You can run speakers A, speakers B, or both, and the selection buttons on the front can be locked out on the rear panel to avoid accidental switching. Additionally, power on and off can be set to automatic signal sensing or 12V trigger options.

2-Channel Stereo Configuration 150W at 8 Ω, 225W at 4 Ω Speaker A / Speaker B Outputs Normal Stereo & Bridged Mono Modes Switchable 20/40 Hz High-Pass Filter 35 Amps Peak Current per Channel 2 Ω Stable Operation w/ Selector Switch Auto On/Off Capability High-Current Toroidal Transformer 115/230V Selector Switch on Rear Panel

Key Specs
Channels	2.0
Power Output per Channel	2-Channel Driven: 150 W at 8 Ohms 225 W at 4 Ohms
Rear A/V Outputs	1x Stereo RCA
Speaker I/O	2x Gold-Plated Binding Post Pairs
Wi-Fi	No
Bluetooth	No
Amplifier
Amplifier Type	Power Amplifier
Channels	2.0
Amplifier Class	Class-AB
Power Output per Channel	2-Channel Driven: 150 W at 8 Ohms 225 W at 4 Ohms
Frequency Response	20 Hz to 50 kHz ±3 dB (1 W)
THD	0.25% (Full Power)
Speaker Impedance	2 to 8 Ohms
Tone Control	No
Damping Factor	> 150 (20 Hz to 20 kHz)
Supported Sample Rates	No
Connectivity
Rear A/V Inputs	1x Stereo RCA
Rear A/V Outputs	1x Stereo RCA
Front I/O	No
Other Rear I/O	1x 1/8" / 3.5 mm (12 V Trigger) Input 1x 1/8" / 3.5 mm (12 V Trigger) Output
Speaker I/O	2x Gold-Plated Binding Post Pairs
HDCP Support	No
Media Card Slot	No
A/B Speaker Selection	Yes
Bi-Amp Capability	No
Input Impedance	33 Kilohms
Input Sensitivity	1 V
Signal to Noise Ratio	114 dB (A-Weighted / Rated Output) 106 dB (Rated Output / Unweighted)
Crosstalk	85 dB (1 kHz) 73 dB (10 kHz) 67 dB (20 kHz)
Wi-Fi	No
Bluetooth	No
Control
Mobile App Compatible	No
Power
Input Power	110 to 240 VAC, 50 / 60 Hz
Power Consumption	Maximum: 550 W No Sound: 32 W
Physical
Dimensions (W x H x D)	17.2 x 4.2 x 16.0" / 437.0 x 107.0 x 406.0 mm (including Protrusions, with Feet)
Weight	27.1 lb / 12.3 kg
Packaging Info
Package Weight	31.855 lb
Box Dimensions (LxWxH)	21.8 x 19.8 x 9.3"

THX Ultra2 certified for reference home theater sound
High-current toroidal transformer
Switchable high pass filter: off / 20 / 40 Hz
Rear panel right and left gain knobs
Impedance switch: 2-3 ohms / 4-8 ohms
Detachable power cord
Rack mountable with separately available kit: RMK22 kit

Related Questions and Answers

Q: 1. Harmonic distortion is specified at 0.5%. How much greater or Is this a typo?

A: That is a TYPO. It should read 0.5% (Info from the Crown XLS 1002 Manual).

Q: 2. What is the lightning cable needed to use with an iOS device? Lightning to micro-USB?

A: The Shure AMV-LTG Lightning Cable (B&H # SHAMVLTG) is the compatible Lightning to micro-USB cable for use with the Shure MOTIV MVI Single-Channel USB Audio Interface to connect an iOS device.

Q: 3. When it say 2100w into 4ohms is that RMS or max watts?

A: According to Crown, the power specifications are the maximum average power in watts at 0.5% THD at 1 kHz.

Q: 4. switchable to 240 volt for worldwide use?

A: Thank you for your question. This amplifier has a 120/240 volt switchable power supply.

Q: 5. how many watts per channel?

A: Rated Power: 2ch x 2 Ω: 3,230 W 20ms repetitive burst / 2,530 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 1,985 W 20ms repetitive burst / 1,700 W 1% THD / 1,470 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,175 W 20ms repetitive burst / 1,025 W 1% THD / 880 W 0.15% THD, both channels driven @ 1 kHz RMS Power 1 x 2,900 W at 2 Ω 1 x 1,780 W at 4 Ω 1 x 975 W at 8 Ω 2 x 2,525 W at 2 Ω 2 x 1,510 W at 4 Ω 2 x 890 W at 8 Ω Minimum Load Impedance 2 Ω

Q: 6. Can I create my own preset and store it in this interface and use it without running the app on my iOS or macOS?

A: There are 5 Presets which are built in to the Motiv MVi, no need for the App. Five built-in DSP preset modes (Speech, Singing, Flat, Acoustic Instrument, and Loud) While in a PreSet, it is possible to tweak it to your liking, HOWEVER, when you exit the Preset, that PreSet reverts back to the "Factory" preset parameters You may also "tweak" settings on the Compression or EQ as needed. On your phone, the App may be used to store your own PreSets (100+) and name them and also control the Motiv MVi. In this scenario, you would need to run the App to recall your PreSets...

Q: 7. Can I use this to convert output from a BLX to USB?

A: Yes, you can send the XLR or 1/4" output from the BLX receiver to the input on the MOTIV MVi, just as you would connect a wired mic or instrument.

Q: 8. Is this item 120 volts?

A: Yes, the Crown Audio XLS 1002 Stereo Power Amplifier that is sold by B&H is rated for 120 volts.

Q: 9. according to the product highlights this amplifier Gli pro PVX9000 switchable from 110 to 220 Volt, is that true? pls confirmed so i can place my order. ...thank u

A: That's what is says. Gli pro PVX9000 features a switchable 115V 60 Hz/230 V 50 Hz power supply.

Q: 10. Does this work with the desktop ShurePlus MOTIV app similar to the MV7 mic?

A: Yes, the MOTIV MVI does work with the ShurePlus MOTIV mobile recording app.

There are no reviews for this product.