Capture professional HD video for your video conferencing, education, house of worship, or other video application with this white N2-210XW NDI|HX3 PTZ Camera from Bolin Technology. This remotely controllable PTZ camera features a webcam-style housing, and it allows you to capture up to 1080p60 resolution video and output via HDMI, USB-C 2.0, NDI|HX3, or IP streaming via its RJ45 Ethernet interface. Additional features include a 10x optical zoom, an additional 16x digital zoom, a 68.8° angle of view, a ±170° panning range, a +90 to -30° tilting range, auto or manual focus, a wide dynamic range, and serial/IP control. It also features a 3.5mm mic/line input and a durable aluminum housing.

The low-noise 1/2.8" 2.13MP CMOS sensor ensures a high signal-to-noise ratio, while the advanced 2D/3D noise-reduction technology further reduces image noise, so a sharp image is delivered in low light. The RJ45 Ethernet port allows you to control and configure the camera via IP, and it also allows simultaneous dual streaming via IP for a live internet stream. You can also output the video via USB with UVC support, making it easy to interface with a computer to send video and audio to a streaming or recording application. There is also an audio line input on the back to input stereo audio into your streams and video output.

The pan/tilt/zoom mechanism uses quiet, smooth movements, controllable using the included IR remote controller, ONVIF and VISCA-over-IP control, or the RS-232 input/outputs that support VISCA, Pelco-D, and Pelco-P protocols for use with a separately available controller. You can store up to 255 preset positions using an optional serial controller, or store six presets when using the included IR remote. You can power the camera using a networked PoE (Power-over-Ethernet) switch or the included power adapter. The camera also includes an RS-232 control cable.

Output via USB-C, NDI|HX3, IP, or HDMI    10x Optical Zoom, 16x Digital Zoom    Up to 1080p60 Full HD Output    1/2.8" 2.13MP CMOS Sensor    IP & Serial Control via VISCA, Pelco-P/D    PoE+ Support, 68.8° Field of View    H.264/AAC-LC, UVC, UAC Support    Lightweight Aluminum/Magnesium Housing

This Bolin NDI|HX3 N2 PTZ camera is equipped with a 1/2.8" CMOS sensor to provide high-quality images in 1080p60 resolutions with 10x optical zoom. The camera comes in a white color.

Related Questions and Answers

Q: 1. how does one control which camera the PTZ presets affect?

A: The preset will affect the camera that is selected on screen.

Q: 2. What is the sensor size of this camera??

A: 1/3 is the size of the sensor.

Q: 3. Does it provide PoE to the camera?

A: No, this does not have PoE to the camera.

Q: 4. Do you need an expensive controller to operate the ptz, or can it be done through a web page?

A: There are web page controls for PTZ, but you can also use the free 'NDI Studio Monitor' application that runs on Windows PCs to control PTZ via an on screen interface or by using a Windows dual axis joystick.

Q: 5. Is it compatible with Canon CR-N300 ?

A: Yes, PTZcam has tested other NDI HX2 cameras like the Canon CR-N300 with the PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller, and they work perfectly with the switcher.

Q: 6. Is this compatible with NDI'HX2 and/or NDI'HX3 cameras?

A: At this moment the PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller supports only NDI/HX2 cameras.

Q: 7. Is there a delay when controlling from the tricaster (like all current cameras have)?

A: You may see 50 milliseconds or less delay with the NewTek camera.

Q: 8. Is it compatible with Canon CR-N500?

A: If the Camera you select has NDI NDI|HX2|HX3 the PTZCam Switch N8 8-Channel NDI|HX2|HX3 Switcher and PTZ Controller should support control of the camera. However, this has not been tested by PTZcam at this time. The Canon CR-N500 does have NDI support though.

Q: 9. What is the image sensor in this camera Newtek? 1/3 inch, 1inch zero inch. Is it sony's sensor or parsonic?

A: The sensor is 1/2.8 and it is made by Sony.

Q: 10. How many watts does this camera consume? Which unmanaged network switch with POE is suitable to run 2-3 camera?

A: While we do not have an exact listing on how many watts this camera will consumer, if you were to use a Network Switch that is POE+ and offers 30 Watts per port you would have more than enough power for 2-3 cameras. The TP-Link TL-SG1008PE is a very good option for this.https://bhpho.to/2BlrS9e