The white PMAX-0357 is a wall mount designed to be used with the ACTi A826 camera.

Designed for ACTi A826 Camera    Wall Mount

Related Questions and Answers

Q: 1. Is this mount compatible with the armrest on a powered wheelchair? Thanks!

A: I would like to this this will fit, but here is a direct quote from the the manufacture. We understand that there are many makes and models of wheelchairs and there may be additional parts required for the perfect camera mount solution for your chair. We have always provided the extra hardware required at minimal additional cost. Please contact us by phone so that we can solve your mounting problem. Phone 800-582-7009 .

Q: 2. I'm using 9ft Savage backdrops. What should the distance of the hooks be so that the Varidrive Inserts groove fits the hooks?

A: The distance at which the hooks should be placed would depend on the distance of the studs behind the wall as much as the width of the paper.

Q: 3. Can I order just the metal chains?

A: You may order the chains as a replacement part through Impact directly. Here is a link to their contact page: http://bit.ly/29CMpL0

Q: 4. Do the pull chains have to be mounted on the right side or can the also go on the left?

A: The chain drive can be mounted on the right or the left side of the VariDrive’s expandable core.

Q: 5. what is on the reverse side?

A: The reverse side of the Godox 5 x 6' Collapsible Background (Rusty Wall 11) is plain white.

Q: 6. How many have secured a piece of wood to your wall first and then secured the brackets to the How many have secured a piece if wood to wall first and then secured the brackets to the wood? Since the studs are usually not the proper width apart for both brackets to be screwed in into the studs.

A: Using wood between beams to get a secure mounting point is often required. Mounting to drywall is not recommended.

Q: 7. so - assuming I get the aluminimum cores for 3 vinyl backgrounds 9x20s each; that'll easily put me over 40 pounds EACH -about 120 lbs. The max weight recommended for this is 22lbs (each) and I cannot find any solutions that accommodate a 40lb limit (each) even though that seems to be normal for vinyl. Are there ANY products that can accommodate Vinyl and be sturdy at the same time? (i.e. metal chains and not plastic etc)?

A: This background support is capable of supporting the weight of a vinyl background. https://bhpho.to/364HptE

Q: 8. Does buying the metal chain version really make a difference?

A: Yes. Both systems work, but the metal chain has better build and durability and has decent tension. Also, I feel the weight of the chain helps the chain hang better and straighter. The plastic chain helps if you are on a budget, but it can seem too light at times. It basically comes down to personal preference.

Q: 9. So, just to be clear, this will hold 3 107 rolls of paper? Those rolls seem pretty heavy and this doesn't look strong enough to hold three.

A: Yes, as indicated under the Overview tab, the Impact Wall Mounting Kit for Holding Three Seamless Backdrops can support three (3) rolls of 9 feet x 12 yards (107 ) of seamless background paper. The Specifications tab for the Varidrive Set indicates it supports backgrounds up to a maximum of 22 lbs. For the record, a standard 107 x 12yds roll of seamless paper weighs approximately 17.5 lbs.

Q: 10. Do these still come in sets of three? Also, what else do I need to buy to mount these to a wall. Thanks!

A: That which you see in the picture is a set for one roll of paper. If you want to operate 3 rolls of paper, you need 3 of those sets. The 2 white things in the picture fit inside the opposite ends of the cardboard tube and can be expanded to fit tightly inside it. Thus installed they become the axle and bearing for the paper roll and they must be supported by some type of wall mounted angle brace that you supply. Once you have a wall mounted support capable of holding the paper rolls, you will need to make an additional simple adapter to hold the axles in place on top of your support.