Designed to connect to virtually any device, the hi-gloss white Audioengine A2+ Wireless Bluetooth Speaker System provide an analog RCA stereo input, 1/8" input, and Bluetooth connectivity with aptX HD for wireless connectivity with your compatible devices. The speakers consist of a 2.75" woofer and a 0.75" tweeter and output up to 15W per channel RMS, or 30W per channel peak.

For your convenience, all connectivity is via the powered left speaker, which connects to the passive right speaker with the included speaker wire. The speakers are magnetically shielded, allowing for placement near your TV or other sensitive devices.

30W RMS / 60W Peak Power    Bluetooth 5.0 Wireless Input    2.75" Aramid Fiber Woofers    0.75" Silk-Dome Tweeters    USB, RCA, 3.5mm Audio Inputs    Stereo RCA Audio Output    65 Hz to 22 kHz Frequency Response    Integrated CSR8670 DAC    15° Tilt with Stands    Stands Made from Silicone Rubber

The A2+ Wireless speakers can connect to nearly any Bluetooth source, so you can wirelessly play your favorite apps like TIDAL, Spotify, Pandora, and more. The Bluetooth receiver built into the A2+ Wireless features aptX HD coding for enhanced quality with compatible devices. aptX HD is also backward-compatible with the SBC and AAC codecs, so you can enjoy audio from nearly any Bluetooth-enabled device. Further, the A2+ Wireless has a Bluetooth range of up to 100' with virtually no degradation in audio quality.

These speakers feature acoustic and electrical designs to help provide enhanced bass without using digital signal processing or bass boost circuits.

There's no network to set up or passwords to create; simply plug in or pair your source device and enjoy.

The cabinets, drivers, bass port designs, amplifiers, and crossovers are all tuned together to help create an efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components.

With all the electronics built into the left speaker, it's easy to connect your source device of choice. All the circuit boards for the power and preamp sections are vertically mounted for augmented mechanical shock protection.

The A2+ Wireless speakers use ferrofluid-cooled, silk-dome tweeters with neodymium magnets. The tweeters are engineered to hold up well under high power, and the edge-driven design helps provide smooth response. The aramid-fiber woven-glass composite helps the woofers retain their shape when being driven at high levels.

Both of the A2+ Wireless speakers are magnetically shielded, so you can place them near your display or other sensitive devices.

• Integrated CSR8670 DAC
• Output current limiting, thermal over-temperature, and power on/off transient protection
• RCA and 1/8" inputs provide easy connection to nearly any audio source, including a turntable or TV
• Variable RCA output for subwoofer connection
• 0.75" thick MDF cabinets
• 1/4"-20 threaded brass inserts on the bottom enable attachment to floor stands or wall mounts

Related Questions and Answers

Q: 1. Is there a latex adapter to fit most on-board mic holders, i.e. Sony sound handle, etc?

A: Yes, you can use the Sanken ROCS Rubber O-Rings for CS-1 (10) (B&H # SAROCS) to create a better fit for the Synco Mic-D2 Hypercardioid Shotgun Microphone with the mic holder on most cameras.

Q: 2. Is this a good mic to use on-camera for run'n'gun interviews in quite noisy and loud environments ?

A: Yes, the Synco Mic-D2 Hypercardioid Shotgun Microphone should do a good job for recording run and gun interviews in noisy and loud environments because it has a very focused pickup pattern and a high signal-to-noise ratio,

Q: 3. Can I use this with a PA system or mixer if I use the right cables to connect it? How far is the range?

A: Yes I have it in a Presonus RM system with a Stereo XLR to RCA cable and works great

Q: 4. Can I use this with iTunes on my iMac?

A: It is a digital blue tooth receiver. It's an excellent product.

Q: 5. What is "open box" ?

A: "Open Box" means that the Pictorico Pro Hi-Gloss White Film for Inkjet Printing was purchased, opened, and returned.

Q: 6. Is there a particular USB bluetooth adapter that is compatible with device, which will work on Windows 7/8/10?

A: We do not carry a Bluetooth transmitter on the level of this Audioengine receiver. Any Bluetooth audio transmitter should be compatible with your Windows computer. The generally will connect to the headphone jack. This will do the job: Aluratek ABT01F Bluetooth Universal Audio TransmitterB&H # ALABT01F MFR # ABT01F

Q: 7. will this hold an NT-1 with an SM6 shock mount?

A: Yes, you can use the DS1 to hold the NT-1 with the SM6 shock mount, but you might want to use a sandbag or weight to keep it stable or consider a stand with a heavier base like the Auray TT-6220 (B&H # AUTT6220B) or Atlas Sound DS-7E Desk Stand (B&H # ATDS7E).

Q: 8. Will this hold my Rode NT-USB without tipping over?

A: Hello Kenny, yes, it sure will. Enjoy!

Q: 9. Does this sound better than the bose bluetooth audio adapter?

A: I don't think my answer will be helpful because I connect the B1 through the toslink therefore it defaults to the DAC in my receiver. Through this connect it definitely sounds better than the Bose. However, when I was using the Bose I was connected using the RCA calbe which default to the DAC in the Bose and not my receiver. My receiver may have a better DAC than the Bose which explains the better sounds.

Q: 10. is there a warranty with this mic or do I need to purchase additional insurance with Allstate?

A: The manufacturer includes a Limited 2-Year Warranty.