You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Hpe Networking Instant On Ap32 Tri-band Wi-fi 6e Access Point (3-pack)

Hpe Networking Instant On Ap32 Tri-band Wi-fi 6e Access Point (3-pack)
  • Product Code: ga163002
  • Availability: In Stock

$2,009.16 $2,632.00

Enhance your growing small to medium business's wireless coverage by adding an HPE Networking Instant On AP32 Tri-Band Wi-Fi 6E Access Point to your network. Designed for high-density environments with dual omnidirectional antennas, this Wi-Fi 6E (802.11ax) access point delivers up to 3.6 Gb/s transfer speeds over the 6 GHz, 5 GHz, and 2.4 GHz bands.

You can provide power and data to the Instant On AP32 through a single cable by connecting its 2.5G Ethernet uplink port to a PoE++ compatible network device. Supporting up to 75 concurrent users, the wireless signal is secured by WPA2 and WPA3 encryption. You can set the access point on your desk or use the included clip to mount it onto a wall or ceiling. Configure the access point via the HPE Networking Instant On mobile app to set up guest networks, block users, and take advantage of other features.

Wi-Fi 6E (802.11ax) Standard    2.4 GHz / 5 GHz / 6 GHz (Tri-Band)    Up to 3.6 Gb/s Throughput    2.5G Ethernet PoE++ Uplink Port    2 x Omnidirectional Antennas    Wall and Ceiling Mountable    Smart Mesh Support    Supports Instant On Mobile App

Key Specs
Wi-FiWi-Fi 6E (802.11ax); Tri-Band (2.4, 5, & 6 GHz) with MU-MIMO Support (2 x 2)
Throughput3600 Mb/s Total
 
Inputs/Outputs1x RJ45 2.5 GbE PoE (Unspecified)
Wireless
Wi-FiWi-Fi 6E (802.11ax); Tri-Band (2.4, 5, & 6 GHz) with MU-MIMO Support (2 x 2)
Number of Antennas2x Internal
Antenna PlacementInternal
BluetoothNo
Throughput3600 Mb/s Total
 
Interface
Inputs/Outputs1x RJ45 2.5 GbE PoE (Unspecified)
Security
Wireless SecurityNo
Lock SlotYes, Kensington
Management
Operation ModesAccess Point
Supported Clients75
Mobile App CompatibleYes: Android & iOS
Hardware
Supported IEEE Standards802.11ax, 802.3at (PoE+ 30 W), 802.3bt Type 3 (PoE++ 60 W)
Electrical
Input Power12 VDC
Power Consumption13.9 W
General
Environmental ResistanceNo
Mount OptionsWall, Ceiling
Dimensions6.3 x 6.3 x 1.5" / 160 x 160 x 39 mm
Weight18.3 oz / 520 g
Packaging Info
Package Weight1.825 lb
Box Dimensions (LxWxH)8.5 x 8.3 x 3"

Orthogonal Frequency-Division Multiple Access (OFDMA) allows multiple Wi-Fi 6 capable clients to be handled simultaneously per channel. This improves efficiency by boosting overall capacity, reducing latency, and improving end-user experience.

Target Wake Time (TWT) is ideal for IoT devices that communicate infrequently. TWT establishes a schedule for when clients need to communicate with an AP. This reduces power consumption and can extend the battery life of clients.

Multiple Input, Multiple Output (MIMO) allows the access point to serve multiple compatible clients simultaneously.

Extend your network coverage wirelessly with the Smart Mesh feature. Using the Instant On mobile app or web portal, connect the first AP, then plug in another AP to a second power source with the DC power adapter. With a single click, the secondary APs connect to the primary AP over the 5 GHz wireless band, extending network coverage without the need for network cables.

Related Questions and Answers

Q: 1. Which model of POE injector comes with the UAP-AC-HD to provide the PoE+ 802.3at / 48V, 0.5A power supply requirement?

A: Per Unifi's Quick Start Guide for this item, the included PoE injector is the Gigabit PoE* (48V, 0.5A) with Mount Bracket (white) which matches up with their SKU of "POE-48-24W-G" which matches up with our SKU of BH# BPOE4824WG. Per Ubiquiti's website, there is no white version of the PoE injector with those specs.

Q: 2. Our building can have upwards of 250 devices at a time to support for Internet access. Can this AP handle 250 devices at the same time?

A: The Ubiquiti Networks UAP-AC-HD-US Wave 2 Enterprise Wi-Fi Access Point can support up to 500+ users.

Q: 3. Can multiple UAP-AC-LITE access points be used as a MESH network?

A: Wireless Uplink allows an access point with a wired data connection to act as a Base Station (Uplink AP) for up to four other access points on 5GHz (or 2.4GHz for some legacy APs), which can extend Wi-Fi coverage to inaccessible areas, as well as pull down any configuration and settings changes from the UniFi Network Controller via the upstream AP. This would act as a mesh.

Q: 4. Can I installed wall vs ceiling?

A: Yes. Included would be Wall and Ceiling Mount Adapter Kits.

Q: 5. If I connected this to a typical Linksys router one might buy at such as a WRT1900AC, would it work?

A: Yes you can connect to any typical Linksys router just Bridge them together.

Q: 6. Can you use another pro 6E router as a fourth extender or is it just as good to get the 6 extender you referenced? BH #EE6MWFE

A: Yes, you can use an additional eero Pro 6E as a fourth mesh router with the eero Pro 6E AX5400 Wi-Fi 6E Tri-Band Gigabit Mesh System (Router Only, White). Using the eero 6 Mesh Wi-Fi Extender, B&H # EE6MWFE, as a fourth router will work as well, but the unit does not support as much throughput and does not have a 6 GHz band that connected devices could utilize.

Q: 7. Does this come with a PoE injector?

A: The multi-packs do not include injectors, but the single units do.

Q: 8. Can I use the PoE adapter in Australia with our 250V?

A: Yep! The adapter supports all worldwide AC power standards (Australia is actually 230V, by the way) - you'll need a cable with an Australian plug on it, it's a cloverleaf cable like many laptop bricks use, also called IEC C5, officeworks and others (jaycar) sell them.

Q: 9. Any reason to get a AC-Pro instead of an AC-HD besides the cost? If I do not mind the cost, is the HD better? Using in a home.

A: For home use, the pro model is sufficient.

Q: 10. When used in conjunction with the dream machine pro, will this access point support 5 computers and 5 smartphones on wifi? They are all used in a smallish apartment.

A: Yes, the Ubiquiti Networks UAP-AC-LITE UniFi Access Point Enterprise Wi-Fi System BH #UBUAPACLITE is capable of handling 10+ devices no problem. The maximum is 200 clients.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Shure Ad610 Showlink Wireless Access Point

$1,524.00 $2,087.88

Shure Mxcwapt-a Access Point Receiver (us)

$12,159.00 $17,144.19

Ubiquiti Networks Liteap Ac Access Point

$267.00 $411.18

Cisco Business 150ax Wireless Access Point

$359.97 $478.76

Aruba Ap-535 Dual-band Wireless Access Point

$7,302.00 $10,587.90

Products You May Like

Feisol Qpd-380 Plate (15")

$209.85 $287.49

Tiffen Series 9 Soft/fx 4 Filter

$508.50 $625.46

Sony Srmaster A/v Recording And Storage System

$130,680.00 $160,736.40

Audient 19" Rack Kit For Evo 16 (pair)

$59.97 $95.95