Keep a pencil handy with the Pencil & Holding Magnet Kit. This kit includes a magnet that holds pencils 0.236 to 0.295" in diameter and a standard pencil. The magnet fastens to most standard music stands or other ferrous metallic surface.

Strong Adhesive Magnet    Holds 0.236 to 0.295" Diameter Pencils    Magnetizes to Music Stands    Includes One White Pencil

Related Questions and Answers

Q: 1. ABout how high do you mount your bracket off of your wall? I will have the 9' wide rolls. Do you hang them 10-12' high?

A: There is no set high to mount it. You can mount it at the height needed.

Q: 2. I'll be using this kit with 86-inch wide seamless paper (about 6 lbs per roll). I've read that one should remove the rolls after each use to prevent sagging in the middle and then issues unrolling/rolling. Have others found that to be the case? I was hoping I could leave these rolls up on these brackets for long periods of time.

A: I have had 86-inch rolls up for more than 8 months now, no sagging noticed.

Q: 3. Can I swap different paper roles out whenever I need to? Like if I wanted to swap a red background for the grey one that's up, would I be able to easily?

A: It would be just a matter of removing the drives from the cardboard core of one paper roll in exchange for another paper roll.

Q: 4. Can these be mounted on stands?

A: Hi , in light stands no , there is some mount that you can use for that , but for me is better in the wall

Q: 5. If I have a core with a painted standard background attached, will this hold the weight of the canvas background?

A: This Impact Wall Mounting Kit would be able to hold a canvas background on an aluminum core safely below a width of 12 feet.

Q: 6. Once you get a 9' roll mounted, what is the total width including the mounts? I want to make sure I have enough clearance on either end.

A: The ends stick out 6-8 from the roll of paper. I would have at least an 11' wall to attach to.

Q: 7. What are some tips for keeping the paper from rolling onto itself when you roll it all the way up? The tension is great and everything works fine, just curious if I missed something or maybe doing something wrong. Do you add clips to the bottom of the paper to keep it tight/weighted when rolled all the way up?

A: You can use clips or a counter weight. https://bhpho.to/2kD2k4e

Q: 8. What would I use for a pole/rod if I wanted to use another backdrop besides paper?

A: Any 10ft pole should work. I will be using a 10ft 2in pvc pipe

Q: 9. Is there a setup to mount this to a grid?

A: You can use superclamps to mount them from a grid https://bhpho.to/2cFjAwj.

Q: 10. For the metal chain, there are no instructions as to how to put it on the drive, as there are for the plastic ones. The plastic ones come opened up so they can be closed after threading. All I can figure out is that the varidrive has to be dissassembled to install the chain, Is that correct?

A: Yes, the black knobs unscrew allowing access for the chain to the gear.