K&m Tv Spigot Adapter Bundle (black)
- Product Code: ga163228
-
Availability: In Stock
The K&M 66350 Connection Sleeve for Speaker Stand in black is designed to attach to all K&M speaker stands with a TV pin diameter of 1.1" (28mm) and M10 x 20mm thread.
Mounts to an M10 Female Thread Aluminum and Steel Construction
| Parameters | |
|---|---|
| Material | Steel |
| Threaded Connector | Female, M10 x 34 mm |
| Diameter | 1.1" (28 mm) |
| Length | 4.5" (115 mm) |
| Weight | 1.05 lb (0.478 kg) |
This sleeve is designed to fit all K&M speaker stands with a TV pin diameter of 1.1" (28mm) and M10 x 20mm threads.
Related Questions and Answers
Q: 1. How sturdy is this item compared to the Kupo KS302011 universal floor stand? Does it hold items solidly / steadily or do they wobble around?
A: This stand is very sturdy when mounting a light to it.
Q: 2. Does this base fold up similar to the Impact base.?
A: Yes this product folds up similar to how the Impact Backlight Stand Base would.
Q: 3. Is the junior pin steel or aluminum?
A: The Kupo Half-Coupler with 28mm Spigot is aluminum.
Q: 4. What is the range of motion for the swivel, 360 degrees?
A: 360 degrees
Q: 5. Do these have a flat side?
A: Yes these spigots have a flat size.
Q: 6. Will this product allow me to tilt my wescott apollo softbox?
A: This video shows a tilting set up using the tilter bracket and the telescoping section of a background stand https://a href= http://m.youtube.com/watch?v=zeyAv2EYc9Y. target= _blank m.youtube.com/watch?v=zeyAv2EYc9Y./a I prefer a similar setup using an Illuminator Arm extreme combined with the shoe mount bracket.
Q: 7. Is this good for elinchrom mono light?
A: This stand would be fine for holding an Elinchrom monolight lower to the ground.
Q: 8. What is the weight limit?
A: This can hold approximately 6-7 lbs at the most.
Q: 9. If I have a large light (like a 300d or a 120d) and I need it very close to the ground is there any reason I couldn't just put the light directly into this base?
A: This can be used by the 120d or 300d.
Q: 10. Could this be used as the base of a table where the top surface measures 36" x 16", a 20" tall double riser column (extended to 30") serves as the leg, and the entire load weighs about 15 lbs? Or would this idea be complete madness?
A: No, the following is a light stand base not a table base.
Top Bestselling Products
Kupo Backlite Base Stand
$86.85 $109.43
Foba A-600 Studio Stand With Caster Base 1000
$35,894.85 $57,431.76
Foba A-300 Studio Stand With Caster Base 700
$19,190.85 $25,331.92
Impact Backlight Stand Base
$56.97 $87.73
Manfrotto 299bbase Wheeled Light Stand Base With Universal Head
$755.64 $1,103.23
Impact Column Stand With Sliding Arm (black Chrome)
$447.00 $643.68
Avenger Strato Safe 18 Stand With Braked Wheels (chrome-plated, 5.7')
$5,600.64 $6,776.77
Impact 3 X C-stand Turtle Base Kit With Case (10.75')
$2,148.00 $3,393.84
Avf Group Calibre 70" Tv Stand (rustic Sawn Oak)
$1,199.97 $1,883.95
Profoto Stand Bracket Knob
$60.00 $84.60
K&m 13.2' (4 M) Light Stand
$1,292.97 $1,797.23
K&m 26706 Heavy-duty Steel Base Plate With Three M20 Threads (black)
$995.97 $1,523.83
Padcaster Universal Stand
$147.00 $186.69
Gabor Laptop Stand
$89.97 $132.26
Avf Group Universal Tv Tabletop Stand/base (400 Vesa, Swivel)
$194.97 $263.21
Rain Design Mstand Laptop Stand (midnight)
$119.70 $147.23
Products You May Like
Kodak 75 X 75mm Cc30g Green Color Compensating Wratten 2 Filter
$197.85 $294.80
Next Level Racing Lockable Caster Wheels (10-pack)
$149.97 $193.46
Protapes Pro Gaffer Tape (2" X 55 Yd, Gray)
$59.97 $83.96
Lenovo E24-28 23.8" Monitor
$702.00 $849.42
Tiffen 4 X 5" Graduated Sunset 1 Filter (horizontal Orientation)
$1,168.50 $1,402.20
Seahorse 56 Oem Micro Hard Case, Empty (clear)
$77.97 $106.04
Chauvet Dj Dj Bank Rgba Led Light Bar Kit (4-pack)
$599.97 $917.95
Bolin Technology Exu420n 4k60 Outdoor Ndi 6-ready Ptz Camera (dark Gray)
$22,185.00 $27,287.55
Tiffen 52mm Pro-mist 2 Filter
$142.47 $213.71
Peak Design Smartphone Slim Wallet (sage)
$149.85 $190.31
