Take control of your DMX lighting setup without a computer with the American DJ WMX1 Mk2 Wolfmix, a standalone DMX lighting control system that's designed with the performer in mind. The WMX1 Mk2 helps you create high-impact light shows on the fly and features an intuitive workflow, a powerful internal effect engine, and tactile controls that make it easy for anyone to control a DMX lighting rig comprised of multiple fixture types.

The WMX1 Mk2 features a 4.3" color touchscreen display, 37 backlit silicone buttons, 4 rotary controllers, and dedicated buttons for strobe, blinder, speed, blackout, and smoke. The interface provides easy selection, addressing, and grouping of fixtures with over 3500 onboard fixture profiles. Additionally, there are over 15,000 fixture profiles that are accessible through the supporting WTOOLS app. The WMX1 Mk2 includes a fixture builder, for creating custom profiles or for use with old or obscure fixtures. It also includes a Fixture Calibration Tool, which allows limiting the area covered by moving heads.

4.3" Color Touchscreen Display    37 Backlit Silicone Buttons    Hands-On Control of DMX Systems    Toolbox of FX Modules    8 Independent Fixture Groups    3500+ Fixture Profiles Available    Over 15,000 Profiles with WTOOLS App    1 DMX Universe, Expandable to 4    Two 5-Pin and Two 3-Pin DMX Connectors    Internal Mic + Line Input for BPM Sync

• Standalone (no computer needed)
• Compatible with any DMX device
• Standard unit comes with 2 DMX universe (up to 2 additional universes are available as add-ons, which are sold via the WTOOLS app)
• Up to 680 fixtures and beams
• Up to 50 fixture types
• Up to 5000 fixture features (color/gobo, etc.)
• 8 fixture groups
• 6 projects
• 15000+ available fixtures (3500+ on the controller)
• DMX address, fixture order, and group setup
• Use as a DMX splitter with DMX universe mapping

• Color FX module with 8 effect types and 16 definable colors
• Move FX module with 8 effect types
• Beam FX module with 8 effect types
• 6 flash buttons for controlling Special FX, Strobe, Blinder, Speed, Blackout & Smoke
• Static color palette with 10 user-definable colors per group and gradient control
• Static position palette with 5 user-definable positions per group with fade and fanning
• Gobo palette with 5 user-definable gobos per group
• 20 namable live edit buttons with flash triggering mode and Park function
• 100 namable presets for storing snapshots with hold and fade timings
• Preset playback cue list—all presets or per page of 20 presets

• Group and master dimming with encoder acceleration
• Group Flash, Full, and Blackout
• 16-bit pan/tilt control
• Multi-beam LED bar control
• FX music pulse sync from microphone or line-in
• FX BPM sync with Ableton Link, OS2L, or BPM TAP
• Effect Speed, Phase, Order, Size, Fade, Fan, and Flick
• Live control of move FX registration point
• Global FX speed and freeze control
• Map DMX IN with group dimmer and patch to output channels
• WLINK to sync with another Wolfmix controller

• Fixture Builder
• Fixture calibration tool to limit the area of moving fixtures
• XY touch-controlled positioning grid
• RGBW touch-controlled color picker
• 8-step real-time sequencer for creating beam and move FX
• Live view of DMX levels with default value override and DMX channel tester
• Beam Editor to override Min and Max values used in generated FX

• Calibrate RGB, white, amber,and  UV mixing with automatic fixed color -wheel translation
• Automatically match similar gobos across different fixture types
• Timed release flash and preset buttons
• Fixture Flip function for reversing beam order
• Fixture Split function for splitting up multi-FX bars
• Lock the controller or lock editing with a password
• Project and fixture backup with WTOOLS app
• Offline 3D visualization with Easy View and WTOOLS over USB
• Autorecovery of active project (no manual saving needed)
• Import different fixture setups into the same project
• Starts in under 2 seconds. Starts sending DMX in under 1 second
• Factory firmware startup recovery mode for times of crisis

Related Questions and Answers

Q: 1. When using the hand unit's wheel, can you "feel" the end points of the lens? Is there a stopping point? Or does the wheel keep spinning without stopping?

A: There are two endpoints on the Nucleus-M hand unit. You have over 300 degrees of rotation.

Q: 2. What is a Gear Mod?

A: The 0.8 MOD Drive Gears is the connection that the Follow Focus Motors make to the lens. You can see them in the top right hand corner in this photo.https://bit.ly/2LcWpev0.8 Gears are found on Cinema Lenses Standard. If you have a photography lens you will be using you may just need to add a gear ring to them to make the connection. Here is a link to a Gear Ring that will work with this system.https://bhpho.to/2KROmYs

Q: 3. Would this motor and hand grip work on the red Komodo to pull focus? I am wanting to mount a RH grip on a rosette off of a Timmy rail so I can pull focus with both hands on the rig. More of a run n gun type setup. Is this doable? Thx

A: yes this can be mounted on a 15mm rail system on a shoulder mount to pull focus during hand held operation

Q: 4. Can this turntable be connected by RCA only, without the need to ground?

A: Usually it is not necessary to ground your turntable as this already happens via the housing. However, should you notice a humming sound, please connect the grounding wire to the GND screw of your DJ mixer or phono pre-amp. If these devices are not sufficiently grounded, a humming sound might still occur.

Q: 5. How can I connect a LANC cable on the TILTA handle to RUN/STOP a Z CAM. ?

A: Please add the following LANC Run/Stop cable to your Nucleus M for Zcam control. BH #TIRS01LANC https://bhpho.to/3P6n5y5

Q: 6. would this handgrip work with the nucleus-nano motors?

A: Yes, the Tilta Nucleus-M Handgrip in this kit works with the Nucleus-Nano motor.

Q: 7. es compatible con cmaras tipo eng ? montando una ptica tipo CANON KH10EX3.6 IRSE

A: No es la forma en que es. Las lentes ENG tienen un engranaje diferente que no es 0,8 que se encuentra en las lentes de cine, que es lo que el sistema est diseado para.El engranaje alrededor del foco y el zoom del can.

Q: 8. Do they offer a kit with three motors (one for focus, one for iris, and one for zoom) or do I need to buy this kit with an additional motor?

A: Because the motor alone is discontinued the only way we have to add a servo motor is by purchasing another kit. The Tilta Nucleus-M Wireless Lens Control System normally only includes two motors.

Q: 9. how many lights can you use with this?

A: You can use up to 64 fixtures with the Visual Productions Cuety Lighting Control App with LPU-1 Interface.

Q: 10. Does this include the IR cable that runs to the projector and gets taped to the IR window on the projector?

A: The Projector Controller for Epson ships with: 1 PixiePlus Circuit Board 6 White Plastic Button Inserts and 7 Rubberized Button Pads IR Emitter IR Emitter Bud Holder 1 6VDC Regulated Power Supply 50 RS-232 Dongle Cable Assembly IR Emitter Cable Anchors 2 Bezels (ivory and white) Installation Guide PixiePlus ELPSP10 Supplement Mounting Screws Paper Clip (for IR-learning)Required and Optional parts and accessories (not included): 1 Leviton Decora wall plate (Required. Match to bezelcolor.) 1 Single-Gang Back Box (Optional. SP Controls recommendsusing a grounded back box) PixiePlus programming tool (PXE-PGM-TOOL) for reconfigurationof the PixiePlus RS-232 codes or schedule events(Optional)