The MuxLab HDMI 1 x 8 Splitter allows you to distribute an HDMI signal to up to eight HDMI displays. Featuring HDMI 1.4 connections, it supports resolutions up to 3840 x 2160 UHD 4K @ 24/25/30 fps, including 1080p @ 60 fps. It supports up to 12-bit color depth per RGB channel, for a total of 36-bit Deep Color. It also supports 3D video and LPCM 7.1Ch audio, Dolby TrueHD audio, and DTS-HD Master Audio.

The splitter is HDCP 1.3 compliant for compatibility with HDCP content protected devices, like Blu-ray players and satellite boxes. All the connections are on the rear panel, and LED indicators on the front panel let you know which are plugged into.

Distributes HDMI Signal to 8 Displays    HDMI 1.4 Connections    Supports Resolutions Up to 3840x2160 4K    Supports Up to 36-Bit Deep Color    Supports 3D Video and HD Audio    HDCP 1.3 Compliant    Front Panel LED Indicators

• Distributes an HDMI signal to up to eight HDMI displays
• Supports resolutions up to 3840 x 2160 UHD 4K @ 24/25/30 fps
• Supports up to 36-bit deep color, 3D video, and HD audio
• HDCP 1.3 compliant

Related Questions and Answers

Q: 1. Wondering if my application would work. Source: laptop; output to: projector and BMD ATEM Television Studio HD. Does this have a chance of working? Thanks.

A: Yes, it should work.

Q: 2. I hope my question isn't too specialized - I will be grateful for an educated guess. I am using a Fuji XT-3 to shoot video. I have used an HDMI cable to run an external monitor (just a cheap desktop monitor) and, separately, to control an audio recorder's start/stop (the Sound Devices MixPre-3 ii). Of course I want to do both at the same time and this device looks like it might enable me to do that. Does this setup have a fair chance of working?

A: This something you'd need to test out to see the results, but we would tend to think a product like this would not pass the needed info to trigger the start/stop recording through HDMI.

Q: 3. Max length of HDMI cable supported?

A: The manufacturer does not explicitly define this specification, but we would lean on the side of caution and keep the maximum length under 25 feet.

Q: 4. Is this HDMI splitter supporting Active HDMI or only Passive HDMI?

A: The, MuxLab 1 x 8 UHD 4K HDMI Splitter would support both active and passive HDMI cable connections.

Q: 5. Can I output the signal to 100 feet from a laptop to 2 tv's with this splitter?

A: Unfortunately, that is not possible.

Q: 6. by having this splitter how long my HDMI output cable can be?

A: 40 feet is the longest I would go with HDMI to maintain signal quality. I use a 20 ft output cable with this splitter and it works great. However, if it sits for a long time without a signal going through it...it might go on standby and you'll have to reset the unit.

Q: 7. Has anybody used this device to feed HDMI over 200ft Cat5/6 to Black Magic switcher input?

A: We have tried to run 4 tv's 2 at 50ft and 2 at 100 - 200ft strictly HDMI off of this thing and it usually has an issue where 1 TV will turn off or loose signal. 4 tv's under 50ft usually works fine. Don't know about a single run though. if your converting over to cat 5 it would fall more on the hdmi to cat 5 converter I believe. This does not input or output cat 5/6.

Q: 8. ideally, i have 8 monitors that will form 1 large display. can this splitter project 1 small screen display source to the 8 monitors as 1 big screen?

A: Sorry, no, it cannot work that way. All this would do is give you 8 separate videos at the same time. For an affordable video wall solution you could use 4 HD TV's and make one image with this controller. Gefen HD Video Wall Controller B&H # GEHDVWC144 (-----Copy and Paste this number to the B&H website search box and click Go. )

Q: 9. Is this simultaneous output to two monitors/TVs

A: YES

Q: 10. Will this unit also split the audio signal?

A: Yes.