Add highlights and fill corners of your scene with soft, flattering light with this large AirPillow 24B Bi-Color LED Light Kit from CineGearFactory. This pillow-shaped 2 x 4' LED mat features a long, air-filled, IP67-waterproof softbox that provides an easy, hook-and-loop installation and a powerful 180W-equivalent output. The LED mat features a 2500 to 20,000K CCT range and 0 to 100% dimming.

Additional light modes include HSI, GEL, XY, and multiple lighting effects (FX). You can control the light and provide optional V-mount battery or AC power using the external controller, and it supports 5-pin XLR DMX512 I/O as well as Wi-Fi DMX control. Also included with the LED fixture is a power cable, lamp cables, a mini air pump, a hook-and-loop handle, a mount, a shoulder strap, and a soft carry bag.

2 x 4' Bi-Color LED Light with Softbox    Pillow-Shaped Softbox Filled with Air    180W-Equivalent Power Output    2500 to 20,000K CCT Range    CCT, HSI, GEL, XY, FX Modes    5-Pin XLR DMX512 I/O, Wi-Fi DMX Control    CRI 98, IP67-Waterproof Ratings    AC Input or V-Mount Battery Power    Includes Controller, Cables, Carry Bag

Related Questions and Answers

Q: 1. Is the color temp continuously variable between 32K & 56K?

A: The light can be adjusted between 3,200k and 5,600k in 100k increments.

Q: 2. When these lights are plugged into power, will they automatically turn back on? I'm looking for lights that when I turn on the switch they are plugged into, they will AUTOMATICALLY TURN ON without having to press a button on the light fixtures themselves. Also, does the fixture maintain it's last settings? Thank you!

A: No, it will not turn on if you turn the power on for the outlet. You need to like most led lights turn it on from the power switch on the light. There are some that do not work that way but can be controlled from a light board. From the board you can turn it on and off. But that is called DMX and that is a much larger setup.

Q: 3. Will this light remember the Settings after being unplug? In case of a power failure?

A: Yes, the Godox SL60IIBI Bi-Color LED Video Light does appear to have an internal memory, and will remember the settings used after a short power failure.

Q: 4. What does the storage case look like

A: The Godox SL60IIBI Bi-Color LED Video Light does not come with a case.

Q: 5. How far does this light throw? I sometimes shoot video of conferences in hotel banquet rooms and all of the room light is overhead. I need a light to put some illumination on a speaker's face, but without being too close.

A: According to Genaray, the Torpedo LED Bi-Color Focusing Flood Light has an output equivalent to that of a 300 watt tungsten lamp head.

Q: 6. How long do batteries last?

A: Depends on the batteries you're using. The Genaray Torpedo kit comes with an multi-voltage AC adapter but does not come with batteries, of which it accepts two types: the Sony NP-F style battery, or the V-mount battery. Both types of batteries are available in various capacities, and overall battery life will depend on how much power these batteries come with.

Q: 7. Are there instructions for setting up the softboxes? I can't find the slots that the poles should supposedly slide into...

A: The soft box fabric of the Godox SL60IIBI Bi-Color LED Video Light (2-Light Kit) (B&H# GOSL60IIBIKT) comes packed flat. The openings (let's call them pockets) where the tips of the rods slide in are at the crease points in the interior lip of the fabric. Here are the basic steps for anyone in your position and, at the end, a link to a video in which you can see the features to be described in these instructions: First, thread each of the four rods starting from the center of the fabric along the crease in the fabric all the way to the lip of the fabric in the front in each corner. Within the lip, the tip of each rod should fit into a tiny pocket in the seam there. (You'll just see that in the video link at the end of these instructions.) With all four of those rods now threaded and in the pockets, we now turn to the center of the soft box where there is a large (approximately 5" or 13cm) hole where the opposite ends of each of those four rods are now positioned if the rods were threaded properly. Now, take the included metal ring -- called a speed ring -- and insert the ends of each rod into it as you'll see in the later video. The first one will be easy, the second one less so, and then for the third and fourth rods you will need to bend each rod slightly to get it to fit. (This is normal.) Third, secure any loose flaps near the speed ring using the hook and loop attachment material (popularly called "Velcro") which is already sewn onto the fabric of the soft box. Now that the soft box is assembled, you can then fit the soft box on the front of the light and turn it clockwise until you hear a click. While this video does a good job of showing you how individual rods are inserted into the pockets at the front lip of the soft box, we would recommend threading all four rods properly before inserting any rod into the speed ring: https://bhpho.to/46Eaivo

Q: 8. Can it be remotely controlled? One of the description images says Wi-Fi

A: This unit has no WiFi

Q: 9. how noisy is the fan. I want to use LED for video?

A: The Genaray Torpedo Bi-Color LED's onboard fan noise is extremely low which makes it a great light for video recording.

Q: 10. What size rectangular soft box works well with this light?

A: The following will adapt to any Bowens mount light shaping tool but a speed ring is required. Please look into the following speed-ring https://bhpho.to/3yH1q7H list of adaptable light shaping tools https://bhpho.to/3COwbu2