Sporting both 3G-SDI and HDMI connections, the Storm 1000S Wireless Transmitter + Dual Receivers Kit from Vaxis enables transmitting visually lossless video signals to the Vaxis receiver with less than 1 ms latency. The transmitter sends a powerful line-of-sight signal up to 1148' and offers 20 channels through the 20 and 40 MHz bands, allowing you to find a clean channel to use. It also allows you to work with multiple pairs of Vaxis Storm transmitters and receivers without interfering with each other's signals.

The transmitter features one 3G-SDI input, one 3G-SDI loop output, and one HDMI input, while each of the two included receivers has one HDMI and two 3G-SDI outputs. The system supports 0' mode, which allows instantaneous playback with an ALEXA Mini. The transmitter supports multicasting to multiple receivers, and in addition, the Storm 1000S is compatible with Storm 058, 800, 2000, and 5000 systems. Each unit features a bright, clear LCD and has a cooling fan that vents to the side to avoid overheating your camera or monitor.

They can be powered using the integrated 2-pin LEMO connector, and each unit has a USB micro power input port as well. In addition, each receiver features an integrated V-mount plate for power input.

1 x Transmitter and 2 x Receivers    Up to 1148' Line-of-Sight Range    Supports up to 1080p Video    SDI/HDMI Input/Outputs    V-Mount Plates on Receivers    2-Pin LEMO Power Input    Instant Playback Mode for ALEXA Mini    Multicast to Multiple Receivers    Compatible with Select Vaxis Systems    Low Latency, LCD Screen

• All units feature internal antennas
• The transmitter and dual receiver kit transmits 1080p wireless video up to 1148' line-of-sight with less than 1 ms latency
• The transmitter features one SDI and one HDMI input, plus one SDI loop output
• Each receiver features two SDI outputs and one HDMI output
• Units are powered by separately available external sources via their 2-pin LEMO-type ports
• Multicast support to transmit video from one transmitter to multiple receivers
• HDMI/SDI cross-conversion support on transmitter
• Timecode and metadata support
• Bright LCD screen on each unit for settings, status, and to scan for open frequencies on 5.1 to 5.9 GHz range
• Bright LCD info screen displays settings, status, and allows for scanning from 5.1 to 5.9 GHz
• Each unit mounts on a rig using a 1/4"-20 thread
• Compatible with Storm 058, 800, 2000, and 5000
• V-mount plates on receivers
• Optional V-mount plate on transmitter
• Durable metal housing

Related Questions and Answers

Q: 1. whats the recommended power adapter for receiver ?

A: We recommend using this dummy battery power supply with this Vaxis Atom 500 kit. You would need one for the TX and the RX . Power2000 AC-F550 AC/DC Adapter with Sony L-Series Dummy Battery BH #POACF550 https://bhpho.to/3sbUu0D

Q: 2. Can this transmit to multiple receivers at one time?

A: Yes, the Vaxis Storm 3000' DV Wireless Video Transmitter with Dual V-Mount Plate can be paired with multiple receivers.

Q: 3. These units look like the two mounting holes on the front have been removed (the HDMI version has them). Is this correct? Cheers

A: The photos are accurate and the mounting holes are on the bottom of the units.

Q: 4. Is there a published frequency spectrum list for each corresponding channel of the Vaxis 3000? Is there anyway to get this if not?

A: The frequency range supported by the Vaxis Storm 3000 Wireless TX/RX Kit is 5.1 to 5.9 GHz.

Q: 5. latency is ?

A: This is rated at 80 ms for latency. It is very low in latency.

Q: 6. how much is latency?

A: This is rated at 80 ms for latency. It is very low in latency.

Q: 7. Is it possible to power the TX with V-mount?

A: Yes, it is possible to power the transmitter with a V-mount battery.

Q: 8. Will this work with Vaxis Atom 600 sdi receivers?

A: For the Vaxis Storm 3000' DV Wireless Video Transmitter, the Vaxis Storm 3000 Receiver (V-Mount) is supported. At this time, Vaxis has not listed support for the Vaxis Atom 600. https://bhpho.to/3iDtCCf

Q: 9. Is this compatible with the Vaxis Storm 500+?

A: Yes, the Vaxis Storm Cine 8 is compatible with all Storm series transmitters.

Q: 10. Is the latency of the receiver also 80ms?

A: yes it is