The white P1388-B 8MP Indoor Box Camera from Axis Communications uses a 1/1.8" progressive scan RGB CMOS sensor to capture 3840 x 2160 resolution video at up to 60 fps. A CS mount that supports i-CS lenses allows you to choose from interchangeable lenses (available separately) to best suit your surveillance application. A built-in microphone and an audio input enables the camera to pick up audio. Integrated PoE technology simplifies connectivity by enabling the transfer of power and data through a single cable. A memory card slot accepts microSD/SDHC/SDXC cards (available separately).

This box camera complies with ONVIF profiles G, M, S, and T, making it compatible with a wide range of surveillance devices.

3840 x 2160 Resolution at 60 fps    Built-In Microphone    Audio Input    RJ45 Ethernet with PoE Technology    Supports microSD/SDHC/SDXC Cards    Complies with ONVIF Profiles G, M, S & T

CS mount enables you to choose from interchangeable lenses that best suit your surveillance needs

Supports i-CS lenses

i-CS connector is compatible with precise iris and DC auto iris

Axis T92G20 connector

Forensic WDR (120 dB) and Lightfinder 2.0 technology help the camera produce clear images in challenging and low-light conditions

Axis Zipstream technology lowers bandwidth and storage requirements

Automatically removable IR cut filter for day and night functionality

Digital PTZ with preset positions

Controllable frame rate and bandwidth (VBR/ABR/MBR H.264/H.265)

Video streaming indicator

Image settings include contrast, brightness, sharpness, white balance, day/night threshold, tone mapping, exposure mode, exposure zones, defogging, barrel distortion correction, compression, 0, 90, 180, and 270° rotation including corridor format, mirroring, text and image overlay, dynamic text and image overlay, privacy masks, polygon privacy mask, target aperture, and scene profiles (forensic, vivid, traffic overview)

3D-DNR/2D-DNR

Electronic image stabilization

Two-way audio with speaker pairing (speaker available seperately)

Analytics include Axis Object Analytics, Axis Scene Metadata, Axis Live Privacy Shield, and Axis Video Motion Detection, with support for third-party applications

Compatible with AXIS Companion, AXIS Camera Station, and video management software from Axis' Application Development Partners

PVC and BFR/CFR free

Related Questions and Answers

Q: 1. The night pictures are poor. The image data says it used a 1 second exposure. The ISO setting was 50, which is fine for a sunny day at the beach, but not at night. am I missing a setting to raise the ISO?

A: Page 32 &33 of the manual: 1. Night photos or videos appear too dark a. Check the battery indicator icon to see if battery power is full. The flash will stop operating near the end of the battery life. b. You will get the best results when the subject is within the ideal flash range, no farther than 100 ft/30m. Subjects may appear too dark at greater distances. c. Please note that when the Capture Number parameter is set higher than "1 Photo", or with very short Interval settings, some images may appear darker than others due to the quick response and rapid retriggering of the camera, allowing less time for the flash to fully recharge before firing again. d. Make sure "LED Control" in the setup menu is set to "High" to ensure maximum output. You can also try setting "NV Shutter" in the menu to "Low" (slower shutter speed=brighter images, with tradeoff of increased blur if subject moves rapidly). e. The ARD (anti-reflective device) shield can be removed to maximize flash output. See page 28 for more details. I saw no reference in the manual in selecting ISO

Q: 2. Can you use rechargeable NiMh AA batteries instead of AA alkaline with this trail camera?

A: Bushnell says:-We do not recommend using rechargeable batteries as they have less capacity and lower voltage. Rechargeable batteries will not operate your trail camera reliably or at its full potential"

Q: 3. Is there any information about what's included in this kit? And I know there is a cable for start stop control, does that come with this kit? Also, does it have camera control to adjust camera settings etc?

A: In the Overview section, on the right hand column, there is an In The Box section. Start/Stop record trigger control is available via optional control cables. - Movcam MCS-1 Hand Control Unit for 3-Axis System - Movcam MRS-1 Receiver Module for Movcam Wireless Lens Control System - Movcam MD-I Iris Motor Drive Module - Movcam MD-Z Zoom Motor Drive Module - 3 x Movcam UM-3 Digital Motor - Movcam 19mm To 15mm Rod Mount Reducer - Movcam D-Tap Power Cable (21.6") - Movcam Remote Hardware Cable (55") - Movcam Carry Case for Movcam 3-Axis Wireless Lens Control System

Q: 4. Can you set specific hours to record?

A: Yes, the Bushnell Core DS-4K No-Glow Trail Camera (Camo) has Field Scan mode for this. Allows you to capture images without requiring a trigger during a specified time period and interval.

Q: 5. Will it find it's way back to the charging station from secondary rooms?

A: The enabot Ebo Air Familybot BH #ENEBOA will find its way back to its charging dock from secondary rooms.

Q: 6. How many photos will it take on one set of batteries?

A: The Bushnell Core DS-4K No-Glow Trail Camera (Camo) has an average battery life of approximately 12 months, at 30 images per day average (15 day, 15 night w/LEDs)

Q: 7. Is the date/time stamp optional or is it imprinted on every photo?

A: Yes it is a feature that you can turn on or off.

Q: 8. Seems issue with video length, by default it takes 10 seconds video, Any solution ?

A: This is a known fault with the 24 MP Bushnell Trophy HD Aggressor even with the best brand fully charged batteries.Waiting on a firmware update to correct.

Q: 9. IS IT RAIN PROOF?

A: The Bushnell Core DS-4K No-Glow Trail Camera (Camo) BH #BU119987C • MFR #119987C Weather-resistant housing for protection against elements during extended outdoor use. The Weather-resistant housing protects the camera from rain.

Q: 10. How long will the batteries last?

A: How long the batteries will last varies depending on the type of batteries you are using and the camera settings. Bushnell recommends using a full set of eight Energizer® Lithium AA batteries in these Trophy Cam HD Aggressor models to obtain maximum battery life. Please take a look at the following link: https://bhpho.to/34zNcJ6