Designed for small- to medium-size businesses, the Cisco Catalyst C1300-16P-4X 16-Port Gigabit PoE+ Compliant Managed Network Switch allows you to operate security cameras, access points, VoIP phones, and other powered devices. It features 16 Gigabit-speed ports, each of which can provide up to 30W of power to compatible devices with a 120W budget. There are also four SFP+ slots available for 10 Gb/s fiber uplinks.

This rack-mountable managed switch delivers smooth performance with a 112 Gb/s switching capacity and 83.32 Mpps forwarding rate. It also includes advanced Layer 3 features and strong security. Front panel stacking support allows you to manage up to eight switches as though they were one virtual switch. Its fanless design silently dissipates heat without disturbing the environment.

16 x Gigabit Ethernet PoE+ Ports    4 x 10G SFP+ Ports    112 Gb/s Switching Capacity    83.32 Mpps Forwarding Rate    Rack Mountable    Front Panel Hardware Stacking    120W Power Budget    Passive Cooling    Layer 3 Features    IPV6 Support

The Cisco Business Dashboard is designed to manage Cisco Business switches, routers, and wireless access points. It simplifies traditional challenges in deploying and managing business networks while automating the deployment, monitoring, and lifecycle management of the network. The 1300 Series switches support an embedded probe as well as direct management, eliminating the need to set up a separate hardware or virtual machine onsite. The device onboarding wizard simplifies the setup and onboarding of new devices to the network.

The Cisco Catalyst 1300 Series Switches support dual images, allowing you to perform software upgrades with minimal network downtime.

Support for advanced network security applications such as IEEE 802.1X and port security tightly limits access to specific segments of your network. Advanced defense mechanisms, including dynamic Address Resolution Protocol (ARP) inspection, IP Source Guard, and Dynamic Host Configuration Protocol (DHCP) snooping, detect and block deliberate network attacks.

As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Catalyst 1300 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

The Cisco Catalyst 1300 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide dynamic Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance.

This switch supports Front Panel Stacking for up to eight switches, allowing you to configure, manage, and troubleshoot all switches in a stack as a single unit with a single IP address.

The sleek and compact design for the Cisco Catalyst 1300 Series Switches provides additional deployment flexibility, including installation outside the wiring closet for sites such as retail stores, open-plan offices, and classrooms without disturbing the environment.

Related Questions and Answers

Q: 1. Is there any ability to place content description information on the M-Disc BDXL 100 GB media?

A: I mean, you can write on the top of the disc with a Sharpie...

Q: 2. I want to use my coax to hard wire my Apple tv via ethernet. Is this plug n play or will i have to call my internet provider to activate a new port? I have a coaxial modem in one room but not where I need it to be. Will this network adapter be in conflict with my modem?

A: That's exactly what I did and things worked fine - no conflict with modem at all, it was essentially plug and play. I also put a third one in so I have three rooms connected by the coax adapters: my office (with computers, printers, cable modem to Internet etc.); home theater room with internet-connected TV, appleTV and Blue ray player; and a third room with another TV. All are happy as clams.

Q: 3. Do this come with remote control?

A: Yes, the Onkyo TX-8470 Stereo Network A/V Receiver comes with a remote control.

Q: 4. How long does it take to burn 100 GB at 4x or whatever large amount you have burned?

A: It would take approximately 2 hours.

Q: 5. What software do you use to burn onto these 100GB 4x Triple-Layer Blu-ray Discs? I have Toast Titanium 10 and it burns onto 50GB Dual Layer BDR no problem. Contacted Toast's phone support and said it is not possible to burn onto Triple Layer Bluray discs in general. :-/

A: We use imgburn to author and burn ISO files

Q: 6. I'm new to archiving with MDiscs, what specifications should I be looking for a Blu-Ray Burner (other than M Disc Support) so that it would be compatible with this M Disc brand? Does the writer need to be BDXL compatible? Thanks in advance.

A: If you are wanting to get M-Disc support than your burner must support it. As well if you are looking to burn BDXL you burner must support this as well.

Q: 7. Can you use it to back up less data than 100 GB and later add more data to it, or do you have to wait until you have 100 GB (or so) of data and then burn it all together?

A: Using a program that allows for multi-session discs, yes, you could add to it but keeping in mind that you won't be able to read that disc until the session is closed.

Q: 8. To use the sdi output is the power supply necessary? Or only with power supply via PoE

A: You should be able to use the SDI output however you power this unit.

Q: 9. Does this type of disc support 4K exports?

A: It can support files of up to 100GB in size.

Q: 10. I have a OWC Mercury Pro 16x Blu-ray, 16xDVD, 48xCD Read/Write burner #MR3UBDRW16...Will I be able to burn these 100GB disks with this burner?

A: This will work in your OWC drive