Designed for small- to medium-size businesses, the Cisco Catalyst C1300-48P-4G 48-Port Gigabit PoE+ Compliant Managed Network Switch allows you to operate security cameras, access points, VoIP phones, and other powered devices. It features 48 Gigabit-speed ports, each of which can provide up to 30W of power to compatible devices with a 370W budget. There are also four SFP slots available for 1 Gb/s fiber uplinks.

This rack-mountable managed switch delivers smooth performance with a 104 Gb/s switching capacity and 77.38 Mpps forwarding rate. It also includes advanced Layer 3 features and strong security. Front panel stacking support allows you to manage up to eight switches as though they were one virtual switch. A low-noise cooling fan helps to maintain optimal temperatures.

48 x Gigabit Ethernet PoE+ Ports    4 x Gigabit SFP Ports    104 Gb/s Switching Capacity    77.38 Mpps Forwarding Rate    Rack Mountable    Front Panel Hardware Stacking    370W Power Budget    Fan Cooling    Layer 3 Features    IPV6 Support

The Cisco Business Dashboard is designed to manage Cisco Business switches, routers, and wireless access points. It simplifies traditional challenges in deploying and managing business networks while automating the deployment, monitoring, and lifecycle management of the network. The 1300 Series switches support an embedded probe as well as direct management, eliminating the need to set up a separate hardware or virtual machine onsite. The device onboarding wizard simplifies the setup and onboarding of new devices to the network.

The Cisco Catalyst 1300 Series Switches support dual images, allowing you to perform software upgrades with minimal network downtime.

Support for advanced network security applications such as IEEE 802.1X and port security tightly limits access to specific segments of your network. Advanced defense mechanisms, including dynamic Address Resolution Protocol (ARP) inspection, IP Source Guard, and Dynamic Host Configuration Protocol (DHCP) snooping, detect and block deliberate network attacks.

As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Catalyst 1300 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

The Cisco Catalyst 1300 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide dynamic Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance.

This switch supports Front Panel Stacking for up to eight switches, allowing you to configure, manage, and troubleshoot all switches in a stack as a single unit with a single IP address.

The sleek and compact design for the Cisco Catalyst 1300 Series Switches provides additional deployment flexibility, including installation outside the wiring closet for sites such as retail stores, open-plan offices, and classrooms without disturbing the environment.

Related Questions and Answers

Q: 1. Do I need any subscription to use the bonding service???

A: No, the MiNE Media Cedar C3 4G/5G Network Bonding Router does not require a bonding service subscription to operate. However, it does require that you install the Linux bonding server software on your own server or use a cloud service like AWS. Also, you need to provide your own mobile network SIM cards to get the cellular bonding to work.

Q: 2. Does it have input scaling on SDI or HDMI inputs?

A: The MiNE Media R8 4G Bonding Video Switcher offers no scaling from the HDMI or SDI.

Q: 3. I have an older TS 569L can the drives that have data on them be swapped into this unit w/o any additional configuration?

A: NAS drives should not be moved from one unit to another unit until the data has been backed up and relocated to another device. RAID configurations and hardware can vary and differences can corrupt or destroy data on drives. This would be true of the QNAP TS-932PX-4G 9-Bay NAS Enclosure BH #QNTS932PX4G and most other NAS on the market.

Q: 4. I received your answer well. Does the model on sale recognize exactly three 5g cores?

A: The MiNE Media Cedar C3 4G/5G Network Bonding Router can be used with up to three 5G or 4G sim cards.

Q: 5. Can I/How would I change the threaded portion to 1/4"-20?

A: You can use a thread adapter like the CAMVATE 5/8" Female to 1/4"-20 Male Mic Stand Adapter (B&H # CAC0988) to convert the post to attach an item that requires a 1/4"-20 thread.

Q: 6. Can this be wall mounted?

A: Reviewing the installation guide, there are no wall-mount options for this item.

Q: 7. if you have more than one of the Lastolite Hotrod Strip Softbox - is the color temperature the same for each? (ie the white diffusion is the same for each product made)

A: The white diffusers in each Hotrod Strip Softbox are manufactured using the same process so that they are equal in density and brightness. The difference in color temperature may occur if you use different brands of flash units in each softbox as they are not created equal.

Q: 8. Is this work with optimum

A: Yes, the Netgear Nighthawk AX4 AX3000 Wireless Dual-Band Gigabit Route is compatible with Optimum modems.

Q: 9. Does it accept 3G SDI level A, level B or both?

A: The MiNE Media R8 4G Bonding Video Switcher supports level A.

Q: 10. Mine came with no instructions. How do you adjust the spring tension? The springs are so stronge out of the package that it does not keep its position - it flies up to full extension.

A: There is no spring adjustments did you get to screw in microphone normally microphone gives added weight