Retro Synthstack Software from Nightox Audio combination of 13 different analog synth oscillators, including samples of the classic Juno-60, Moog, and Prophet. Supporting AU, AAX, and VST3, you can use these samples in most major DAWs or as a standalone app. With 960 samples to work with, you can create unique sounds with up to five effects on each instrument (pan, width, input delay, EQ, and compression). The software comes with over 70 presets, and users can create and save their own presets).

13 Synthesizers, Over 70 Presets    5 Effects per Instrument, 960 Samples    AU, AAX, VST3, and Standalone    Compatible with Most DAWs

Related Questions and Answers

Q: 1. Does this work with the Panasonic CX350? Specifically can you control focus, zoom, and iris on the cx350?

A: There is no rosette on the Panasonic CX350 for you to interface the CAMEOGEAR CameoGrip Retro Handgrip with 20" LANC Cable. However, you could attach this handle to a baseplate that has a rosette on it. The baseplate would attach to the bottom of the camera. The camcorder supports LANC control. Therefore, if you get it rigged to the camera, you will be able to use the LANC control.

Q: 2. Does it support HSS?

A: Yes, the Godox Lux Master Retro Camera Flash supports HSS.

Q: 3. Is anyone successfully using this mic along side a USB MIDI controller with GarageBand and the like?

A: That mic should work fine with Garageband while using a USB MIDI controller.

Q: 4. Will this flash work for my Nikon FM2 and canon AE1-P?

A: Yes, the Godox Lux Cadet Retro Camera Flash will work on any camera that has a PC port on the camera body or lens the included 2.5mm (about 0.1 in) to PC Sync Triggering Cable is all that is needed to make the flash work with any PC capable camera.

Q: 5. Would this work with a rolleiflex?

A: Yes, it will work in manual mode with Rolleflex with sync cable, please see available sync cords in accessories under the Godox Lux Master Retro Camera Flash.

Q: 6. Will this kind of flash work with my Sony A6000?

A: Yes, the Godox Lux Cadet Retro Camera Flash will work on the Sony a6000 Mirrorless Camera. This Flash has a single pin Flash Shoe which means it will function as a Manual Flash. No TTL is available.

Q: 7. Will it work on a Z CAM?

A: CAMEOGEAR CameoGrip Retro Handgrip with 20" LANC Cable (B&H# CACAMGRIPL) is designed to function with certain Canon cinema cameras and Sony mirrorless and cinema cameras (see the Camera Compatibility section below). Unfortunately, because the protocols used for control with those are different from the ones for Z CAM products it will not work for Z CAM cameras that are currently available. We recommend the RVLVR Right-Side Remote Clutch Handle with LANC Camera Control (Black Walnut) (B&H# RVLCLUTCH1) for the Z CAM E2, E2-S6, E2-F6, E2-G, E2-C, and E2-F8: https://bhpho.to/37gTrW4

Q: 8. Can the “GODOX LUX MASTER” be triggered by the “Profoto Connect Pro Remote for Sony?”

A: No, the Godox Lux Master Retro Camera Flash can not be trigger by the Profoto Connect Pro Remote for Sony.

Q: 9. What cable do I purchase to use this with the Canon C70

A: The CameoGrip Retro Handgrip with 16- Multi-Terminal Cable would require a 8-pin Hirose to LANC cable to function with the Canon C70. There was a kit for this handgrip which came with such a cable, but unfortunately, it is no longer available (the "CAMEOGEAR CameoGrip Retro Handgrip with 20" LANC Cable BH #CACAMGRIPL"). This specialty cable may still be able to be sourced from the manufacturer: https://www.cameogear.com/about

Q: 10. Does this flash have a built in modeling lamp?

A: No, the Godox Lux Master Retro Camera Flash does not have a modeling lamp.