The space gray Talon XL Top Handle with Trigger REC for Select Cameras from Kondor Blue is ideal for performing low-angle shots with any of the wide range of cameras compatible with it, and it also provides a start/stop REC trigger when paired with an optional cable that will work for your specific camera. Two NATO rails and two cold shoe slots, along with three 3/8"-16 ARRI-type threads, provide multiple mounting options for your accessories. The unit also boasts a molded rubber grip that is perfectly contoured to fit your hand, as well as an integrated bubble level.

Camera Cage for RED KOMODO X    Top Handle with Run/Stop Button    ARRI-Style Baseplate    501-Type QR Plate Included    2 x 8" PPSH 15mm Rods

• Canon EOS R, RP, R3, R5, R5C, R6, R6II, R7, R10
• Canon Cinema C70, C100, C200, C300, C500 all versions
• Canon DSLR: All cameras with a 2.5mm or N3 trigger port
• Sony Alpha: a7S II, a7 IV, a7R V, a1, a9 II, a9, a7R IV, a7R III, a7R II, a7R, a7S, a7III, a7II, a7, a6600, a6500, a6400, a6300, a6000, a5100, a5000, a3500, a3000, ILCE-QX1
• Sony FX Cinema Line: FX30, FX3, FX6, FX9
• Sony compact camcorders: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, RX0 II, RX0, HX99, HX90V, HX80, HX60V, HX50V, HX400V, HX300, WX500, QX30, ZV-1, FDR-AX100, FDR-AX30, FDR-AX33, FDR-AV43, FDR-AX53, FDR-AX700, FDR-AXP35, HDR-CX230, HDR-CX240, HDR-CX320, HDR-CX330, HDR-CX380, HDR-CX405, HDR-CX430V, HDR-CX440, HDR-CX455, HDR-CX480, HDR-CX485, HDR-CX675, HDR-CX900, HDR-GW66V, HDR-GWP88V, HDR-PJ220, HDR-PJ230, HDR-PJ270, HDR-PJ275, HDR-PJ340, HDR-PJ350, HDR-PJ380, HDR-PJ430V, HDR-PJ440, HDR-PJ540, HDR-PJ650V, HDR-PJ660V, HDR-PJ670, HDR-PJ675, HDR-PJ790V, HDR-PJ810, HDR-PJ820
• Lumix S1, S1R, S1H, S5, S5II, S5IIX
• Lumix GH6, GH5, GH5 II, GH5S, GH4, GH3, GH2, GH1, G95, G9, G8, G7, G6, G5, G3, G2, G85, G10, G1, GX8, GX7, GX1, GF1,
• Lumix DMC-FZ2500, DMC-FZ1000, DMC-FZ300, DMC-FZ200, DMC-FZ150, DMC-FZ100
• Fuji XT3, XT4, XT5, XH2, XH2s,   X-T2, X-T1, X-T30, X-T20, X-T10, X-T100, X-Pro3, X-Pro2, X-E3, X-E2S, X-E2, X-A5, X-A10, X-H1, X100F, X100T, X70, X30, XF10, GFX 50S
• Blackmagic Design URSA 4K, URSA Mini (all versions), BMCC 2.5K, BM Production 4K, BM Studio Camera, Micro Cinema, Micro Studio, original BMPCC 1080
• RED KOMODO, KOMODO-X, V RAPTOR, V RAPTOR XL, RHINO
• Z CAM E2-S6, E2-S6G, E2-F6, E2-F8, E2, E2C, E2-M4

Related Questions and Answers

Q: 1. Does the 3k Pro have the quick release feature of the 3k kit?

A: The JOBY GorillaPod 3K PRO Stand (Black/Charcoal) BH #JOJB01569 • MFR #JB01569, https://bhpho.to/338WXNx are just the legs. It does not have a quick release. The kit comes with a head and that has the quick release function.

Q: 2. I do macro photos of objects on the ground and want to see if this would allow the camera to be horizontal to the ground and low. The tip of my macro lens woud be about 1/2-1" above the object being photographed. Will this tripod do this?

A: There should be no issues using the tripod in this manner.

Q: 3. Is the legs (balls) made out of metal?

A: The joints are a hybrid of metal and plastic. The socket component of each ball joint is metal, while the inner ball component is made of ABS plastic.

Q: 4. Does this battery work perfectly on C100 mark2?

A: This is the same kind of battery that the C100 Mark II uses, however it is designed for the RED Komodo. It may not work perfectly with the C100 Mark II as it is designed to work with a different camera.

Q: 5. The 3K PRO Stand does come with a 3/8 mount screw adaptor like it shows on the kit? i want to use a diferent ball head but it comes with a 3/8 female mount.

A: Yes, the reducing bushing shown will allow you to use a ball head with a 3/8" thread.

Q: 6. When I remove the small Arca-Swiss plate that comes with the Joby 3K Pro Kit, the remaining Arca-Swiss clamp on top of the Joby has a spring loaded pin that interferes with my A-S plates at the bottom of all my cameras/lenses. Can that pin be removed some how?

A: It cannot be removed, unfortunately. But there are ways to deal with it. You should still be able to use all your existing arca-swiss plates if you open the clamp up all the way. Simply insert it top down rather than sliding it in and it should still accommodate your current plates. You can also tape it down using some cellophane tape or gaffer's tape to keep the safety/security pin from popping up.

Q: 7. Can you see the battery % when using this with the komodo?

A: It will work but this battery is not officially approved by RED. Batteries like Canon, Swit or Hedbox would pass data to the Komodo and they are approved. Approved - https://bhpho.to/3q5UuMT

Q: 8. Will this work with the Bright Tangerine Canon C500 Mark II Expert Kit ? Just looking for a shoulder pad to slide into the baseplate of the kit.

A: Yes, this should work as it is also employing an ARRI Standard Dovetail.

Q: 9. Is it compatible between a TILTA handle and Z CAM, to REC/STOP ?

A: No, the Kondor Blue KOMODO EXT to 2.5mm LANC Remote Trigger Shutter Cable only works with the RED Komodo. See: https://bhpho.to/3NFkN7J

Q: 10. Is there a small case that would fit the 3k Pro Rig?

A: The tripod is so small, light and durable that most people just carry it in their camera bag rather than using a separate tripod case. But this Mefoto case would fit the Joby 3k: https://bhpho.to/3aQ1Mz6