Audio engineers, producers, and musicians looking for a professional studio monitor with a wide stereo image will be impressed with the single PreSonus Eris Studio 5, an active 2-way studio monitor which provides an expanded and highly accurate frequency response and a wide stereo field, thanks to the custom-designed EBM (Elliptical Boundary Modeled) waveguide, which provides a broad sweet spot. This compact studio monitor is well suited in both home studios and professional mix rooms.

Two Class-AB amplifiers deliver 45W to the 5.25" woven composite woofer and 35W to the 1" silk dome tweeter, which offers a snappy, accurate transient response. The monitor offers a frequency response from 20 kHz down to 48 Hz for a full-range sound with plenty of volume (102 dB SPL). The rear panel provides acoustic tuning controls including a three-position Acoustic Space switch that helps compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies, while a low cutoff filter makes it easy to integrate a subwoofer into your monitor setup.

5.25" Woofer and 1" Silk-Dome Tweeter    48 Hz to 20 kHz Frequency Response    102 dB SPL    EBM Waveguide for a Wide Sweet Spot    Control Level, HPF, MF Trim, and HF Trim    Acoustic Space Filter    XLR, 1/4" TRS, and RCA Connections    Class-AB Bi-Amplification at 80W    RFI Protection    Output Current Limiting

• 5.25" woven composite low-frequency driver
• 1" ultralow mass, silk-dome, high-frequency driver
• Crossover Frequency, 3.5 kHz
• 100 x 60° EBM waveguide provides a sweet spot
• Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
• 80W, Class AB dual amplification
• 48 Hz to 20 kHz frequency response
• 102 dB Peak SPL (at 1 m)
• Acoustic Tuning Controls:
  • Acoustic Space (Flat, -2 dB, -4 dB)
  • High Frequency (±6 dB, center 10 kHz, continuously variable)
  • Mid Frequency (±6 dB, center 1 kHz, continuously variable)
  • Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
• Inputs:
  • XLR and 1/4-inch TRS balanced rear-panel inputs
  • RCA unbalanced rear-panel inputs
• Protection:
  • RF interference
  • Output-current limiting
  • Over-temperature
  • Turn-on/off transient
  • Subsonic filter
• Power Saver mode (engages after 40 minutes)

Related Questions and Answers

Q: 1. What is the diameter of the lowest riser pole?

A: Its about 1 1/8th inches.

Q: 2. Will this hold a kino flo diva lite 400?

A: This stand can hold a Kino Diva 400.

Q: 3. how much weight can this hold? thinking to use a C stand to hold my photo booth camera/ computer/printer/ case. Any other suggestions?

A: The load capacity is going to be 22 pounds for the C-stand. If mounting heavy things, we would recommend using sandbags to hold everything down. You can get that here: https://bhpho.to/2CUDFhl

Q: 4. Wanting to add a shotgun boom to this stand. What accessories do I need to purchase? Thanks!

A: Yes. Please review the following item in order to do so. Auray Boom Pole Holder BH #AUBPH • MFR #BPH https://bhpho.to/3lYLmKe

Q: 5. Would a kupo 20" riser fit in the turtle base of this?

A: Yes. The following risers are swappable.

Q: 6. is it compatible with godox monolight heads?

A: Yes, it will fit.

Q: 7. Does this stand feature air/spring cushioning?

A: No, the Impact Turtle Base C-Stand - 10.75' does not feature a spring or air cushioning mechanism.

Q: 8. What is the packed length with legs detached? This question was asked but there are conflicting answers.

A: Box Dimensions (LxWxH) 53 x 14 x 3"

Q: 9. Do I need to buy anything extra to attach my AlienBee B400 to this stand?

A: No, the AlienBee 400 will attach directly to the c-stand with no needed extra accessories.

Q: 10. Can this be used with a ptz?

A: While mounting a PTZ camera to the Impact Turtle Base C-Stand (10.75', Chrome) may be possible with the correct mount adapter for your PTZ camera, I would highly recommend using a more stable mount like a tripod instead.