The SB4 System Bridge from Aviom combines up to 64-channels from four Pro16 or Pro16e A-Net streams onto a single Cat-5 cable, simplifying cabling when using any of the Pro16 series products for personal mixing, digital snakes, or audio distribution systems. All network connections utilize heavy-duty locking Neutrik EtherCon connectors. The SB4 combines up to four 16-channel A-Net streams from digital console cards or analog input modules and transports the data over a single Cat-5 cable. The A-Net Bridge output carries up to 64 channels between the SB4 System Bridge and either another SB4 System Bridge or a D800 A-Net Distributor.

Additionally, many Pro16 products may be connected to a Pro64 A-Net system with the addition of the ASI A-Net Systems Interface. By separating the 64-channel Pro64 stream into up to four 16-channel Pro16 outputs, the ASI translates the Pro64 A-Net data into Pro16 data. 

Stream 64-Channels Thru a Single Cat-5    Locking Neutrik EtherCon Connectors    EtherCon A-Net Bridge Output    Pro16 and Pro16e Compatible    No Power Supply Required    Multiple SB4s Create Complex Systems

• Four A-Net I/O ports on the rear panel (16 channels each)
• Neutrik EtherCon connectors
• One front-panel A-Net Bridge output (up to 64 channels), with EtherCon connector
• Simplifies the connection of multiple digital console cards to A360 Personal Mixers
• Multiple SB4 units can be used to create digital snake systems
• Requires no power supply

• D800 A-Net Distributor
• D800 Dante A-Net Distributor
• A-16II Personal Mixer
• A-16R Rack-Mounted Personal Mixer
• A-16D A-Net Distributor
• A-16D Pro A-Net Distributor
• AN-16/i Input Module
• AN-16/i v.2 Input Module
• AV-M8 Input Module
• AN-16/i-M Mic Input Module
• Y1 console interface card for use with Yamaha consoles
• AN-16/o Output Module
• AV-P2 Output Module
• Third-party Pro16 console interface cards

Related Questions and Answers

Q: 1. D400 in stock? How many days for the shipping to Hong Kong?

A: This item is Special Order and not stocked here at B&H. Please contact our Sales Department at sales@a href= http://bandh.com target= _blank bandh.com/a for information on purchasing and shipping inquiries.

Q: 2. I have a Red Helium8K and a Sony FX6. Can I use it for both? If not, what will I need to buy separately?

A: For RED DSMC2 Cameras, you will need the Cine Plate for RED DSMC2. https://www.bhphotovideo.com/c/product/1287515-REG/arri_k2_0008886_cine_plate_for_red.html ARRI does not currently have an intermediate plate for the Sony FX6 and can mount directly to the BP-9.

Q: 3. Could you possibly use this to control lights from other manufacturers like the Nanlite 60c?

A: No, Aputure Sidus Link Bridge are only compatible with Aputure 2.4G Wi-Fi lighting fixtures, such as the HR672, Tri-8, LS C120d II, & LS C300d via your Bluetooth enabled smart device running the Sidus Link mobile app. For Nanlite 60C you need the Nanlite NANLINK Transmitter Box BH #NANTB • MFR #WSTB1 to control your lights through an app.

Q: 4. Is the A320 compatible with the A16ii personal mixer?

A: The A320 and A16ii can be used in the same system. If you have a 16 channel setup the A320 will only be used as a 16 mono channel mixer. If you are upgrading to a 32 channel system, the A320 can have 16 stereo Chanel's but the A16ii will only see channel 1-16 and not 17-32. If you are looking to replace the A16ii mixers, yes this will work but the A16ii is a better sounding mixer. The A360 is a much better sounding mixer than the A320 and A16ii, but is so feature packed that it would be a waste to get if you don't have a 32 channel system. I hope this answers your question.

Q: 5. Will this allow me to control my LS1 lights with the sidus app?

A: Yes, you may use the Aputure Sidus Link Bridge with the Aputure Light Storm LS 1s LED Light and the Sidus Link App.

Q: 6. able work Stella reflex??

A: The Elinchrom Skyport Bridge is not compatible with the Light & Motion StellaPro Reflex LED/Flash Head.

Q: 7. https://www.bhphotovideo.com/c/product/1203106-REG/kirk_qr_ab1qr_2_5_square_lug_quick.html Can the above be used instead? As an alternative? What are the differences?

A: Yes, the one above works as well but you might want to consider BH #KIQRAB1QR if you are using long lenses or heavy rigging. It can offset the weight a lot better.

Q: 8. How can I know if my Elinchrom Skyport Bridge is charged or is charging?

A: According to Elinchrom, there is a status LED which would indicate the charging level as green if 100% charged, orange at 50 % charge and red to indicate that it should be charged immediately.

Q: 9. The MVH 502AH fluid video head comes with two 3/8-inch accessory attachment points, one on each side of the bridge. How do these attachment points work when the Kirk replacement bridge is installed?

A: Please e-mail us: askbh@bandh.com or call:

Q: 10. Does one Sidus Link Bridge connect one instrument or can you control multiple legacy instruments with one Bridge?

A: The Sidus Link Bridge • Allows you to control legacy 2.4GHz Aputure fixtures via the Sidus Link® App. • Control up to 12 groups (3CH*4GR) of legacy Aputure fixtures / 12 units.