Compatible with a the short S-Mic 2S and S-Mic 3S, this W02 Deluxe Windshield from Deity Microphones ensures your audio is protected from wind distortion. The furry windscreen features an internal rubber gasket to prevent it from slipping off your microphone. It can withstand wind speeds up to 9.3 mph.

For S-Mic 2S/3S    Furry Windscreen    Internal Rubber Gasket    Withstands up to 9.3 mph Winds

Related Questions and Answers

Q: 1. What is the pinout of this unit with and without the input jack attached? Is the capsule attached to both L, R? Does the input replace the capsule = R? Does it take L, R, or Both on input for the R channel output?

A: When using the Deity Microphones V-Mic D4 Mini Ultracompact Camera-Mount Shotgun Microphone on its own, the signal captured by the microphone capsule is sent to both the left and right channels of the 3.5mm output connection. When using the V-Mic D4 Mini with a secondary input source, the microphone signal is allocated to the left channel of the output connection while the secondary source uses the right channel.

Q: 2. How many inches is it from the very tip of the XLR end to the begining of the notches?

A: Deity has not provided this specific measurement for the Deity Microphones S-MIC 2S unfortunately.

Q: 3. Any difference between this and the Rycote classic softie - other than price?

A: Not that I can see. I own both, and it appears to me that they are the same manufacturer with different labels.

Q: 4. Does it work with Rode ntg2?

A: For proper fitment to the Rode NTG-2 we recommend the WSS-2014

Q: 5. Does the shock mount include a 1/4" 20 threaded hole on the bottom?

A: The shock mount for the Deity V-Mic D4 Mini Shotgun Microphone has a 3/8" female thread on the bottom of the cold shoe and the mic comes with a thread adapter that reduces the thread size to 1/4"-20.

Q: 6. How do you know what to connect where? The 3 ring side or the 2 ring side into the mic or camera?

A: There are two cables included with the Deity Microphones V-Mic D4 Mini Ultracompact Camera-Mount Shotgun Microphone. One is 3.5mm TRS to 3.5mm TRS and the other is 3.5mm TRS to 3.5mm TRRS. The TRS connector has two rings and the TRRS connector has three rings. The TRS connectors should be used to connect to the mic output and also to connect to a camera's mic input or to the input on a recorder. The TRRS connector is for use with a mobile device and can be used with adapters to enable compatibility for connection to iOS or Android devices like iPhones, iPads, and other smartphones and tablets.

Q: 7. Is this just the Duo without the rear facing mic?

A: Correct this is the regular one capsule version.

Q: 8. what foam windscreen is recommended for this? If i don't want to use the furry wind cover

A: There are no foam windscreens available separately that are specifically sized for the Deity Microphones V-Mic D4. You could try using the Auray WHF-2040 Foam Windscreen For 3/4" Diameter Microphones (B&H # AUWHF2040) which is close in diameter, but it's not an exact fit for the V-Mic D4. A rubber O-ring or rubber band or a bit of padding or even tape can be used to create a tighter fit for the windscreen if you find that it is too loose.

Q: 9. can I connect this to lightening or USB-C for mobile recording?

A: Yes.

Q: 10. will this mic fit perfectly in the XLR handle for the Sony FX30? not loose? just right?

A: The Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone will not fit perfectly inside the Sony FX30 camera bracket, a spacer will be required, we recommend this item: Auray Rubber Spacer Sleeve for XLR Shotgun Microphones on Camcorders B&H # AURSSMCAM45 MFR # RSSM-CAM45