The black Spectra Cyc 200 3K White LED Wash Light from Altman is a 200W cyclorama/wall wash lighting fixture that features 3000K Luxeon Rebel white LEDs. The Spectra Cyc also utilizes an asymmetrical aluminum reflector to broadly and evenly disperse the light as well as an LED blending lens to reduce the effects of pixelization from direct view. The light also has pre-programmed modes for adjusting dimming from 0-100% as well as setting up a strobe mode.
Connecting the fixture to your setup is simple with male and female 5-pin XLR ports, these let you transfer data through a series of daisy-chained lights. There is also a powerCON AC out port for feed-through power for up to 20 connected lights. Other features of the Spectra Cyc 200 are push button addressing and a universal 100-240 VAC built-in power supply. It comes with a 5' power cable and is made in the USA.

Luxeon Rebel White LEDs    Color Temperature: 3000K    Maximum Output: 2680 lumens    40° Vertical & 80° Horizontal    Asymmetrical Reflector & Blending Lens    1 Male & 1 Female 5-Pin XLR Ports    PowerCON Port for Feed-Through Power    Push Button Addressing    DMX512 and RDM Compatible    Universal 100-240 VAC Power Supply

Maximum output of 2680 lumens

Beam spread of 40° vertically and 80° horizontally

Max power draw of 200W

Designed for use on 8-12' centers

Integrated carrying handle

Related Questions and Answers

Q: 1. We have a white cyc wall in our studio that is 12' X 12' with a rounded corner. Would two of these cover that much area?

A: The 200W Spectra Cyc is designed to be place on 6' -8' centers at a 3' setback off of the surface. Two of these units should be sufficient to light this wall.

Q: 2. Is the white/gray powercon connector included in the box so that I could daisy chain the power without any separate purchases?

A: The powercon to daisy chain the light would be a separate purchaes.

Q: 3. how do I mount a photo strobe on it? Specifically the ALIEN B800 OR B1600

A: Unfortunately, this stand uses a bolt which normally connects to a yoke mounted light. A stand which can be used with an Alien Bees monolight is the Impact Folding Wheeled Base Stand (Black/Chrome-plated, 8.5'), B&H # IMLSPSFB8. Please see the image below for reference.

Q: 4. How would you mount this fixture to an electric?

A: Power cable can be splice and tapped into a junction box. With the support of a electrician.

Q: 5. I would like to mount this to a wall - cant tell if that is possible based on the photo?

A: The design of this light and most like this, hang from the ceiling. They can get to hot and next to a wall. And the mount is not made for wall attachment but for hanging as well.

Q: 6. is there a barn door available for this unit?

A: No, there is no barn door made to work with the American DJ 18P HEX RGBAW+UV LED Wash Light.

Q: 7. Does it have barn doors?

A: According to the manufacturer, the Altman 4-Leaf Barndoor Set B&H # ALBD465Q is the correct barndoors for this fresnel.

Q: 8. How many lumens does it have?

A: It is a 7 x 12 Watt RGBW LED. The manufacturer does not specify a lumen rating.

Q: 9. guaranty?

A: Included is a Limited 2-Year Warranty from Chauvet.

Q: 10. Can they be manually dimmed? I want to use without a light board.

A: No, it cannot. The Pegasus6 would have to either be controlled by a mains controller board to be controlled via a phase cut dimming system or it must be controlled by a DMX controller.