Feed timecode into your Sony FX3 or FX30 camera from your Tentacle Sync SYNC E, TRACK E, or original timecode unit using this 3.5mm TRS to Multi Interface Timecode Cable. Insert the right-angle 3.5mm TRS connector into your compatible timecode unit. Insert the Multi Interface connector into your Sony FX 3 or FX30 camera for a direct timecode connection without using BNC adapters. In total the cable measures 7.9" long for efficient cable runs.

Timecode from SYNC E/TRACK E Units    Right-Angle 3.5mm TRS Connector    Sony Multi Interface Connector    7.9" Total Length

Related Questions and Answers

Q: 1. Would this work with a Deity TC-1?

A: Although the Deity TC-1 uses the same TC output type as the Tentacle Sync, the Tentacle C24 Timecode Cable has not been tested with the TC-1 and results may vary.

Q: 2. What is the difference between MK1 and MK2 ?

A: The major difference is that the MK2 has Bluetooth 5.0 for more reliable monitoring and easier setup via phone or tablet. The battery life was also improved compared to the original. Aside from that it's identical to the old one.

Q: 3. What A series Sony cameras does this work with today (June 2024). A7R 5, I hope?

A: The Tentacle Sync 3.5mm TRS to Multi Interface Timecode Cable for Sony FX3/FX30 (7.9") is only listed as compatible with the FX3 and FX30 cinema cameras.

Q: 4. Can I sync a Logic session through UAD Apollo?

A: You can use the Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 (Dual Set) (B&H# TETE2MK2) to add a timecode signal to a single audio track. That can be fed into many devices that produce or modify audio, whether that is your computer using a DAW, a camera, or a field recorder. If you are using the Universal Audio Apollo Solo Heritage Edition Desktop 2x4 Thunderbolt 3 Audio Interface with SOLO Core Real-Time UAD Processing (B&H# UNAPLSHE) then you will first need to have a means of inputting an audio track into your DAW so that all of the tracks may be read (including the one with the timecode) simultaneously.

Q: 5. Will this fit the Tentacle Track E ..or just the Tentacle Sync E?

A: The Tentacle Track E is slightly too large to fit into this bracket.

Q: 6. Will this work to pass TC from a Tentacle Sync TC box to an FX30?

A: No. The Deity Microphones C23 Timecode Cable has a locking 3.5mm connector and is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80). The Tentacle Sync E mkII Timecode Generator has a non-locking 3.5mm connector which is not compatible with the C23 Timecode Cable.

Q: 7. Will the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male BH #KORSMXM20 also allow you send signal from a timecode generator to your Sony FS7? How are the two cables functionally or anatomically different?

A: While the Kopul and the Camvate cables are basically the same. The Camvate model has a higher quality for Time code use and it would be the suggested cable to work with on the Sony FS7.

Q: 8. This cable now works with the a7s3 new firmware update correct? The tentacle website has this listed as dor the a7s3 as well

A: The Tentacle Sync 3.5mm TRS to Multi Interface Timecode Cable for Sony FX3/FX30 (7.9"), BH # TEC24, is compatible with the SONY a7s3 mirrorless camera.

Q: 9. Does this cable and Tentacle Sync box need to be connected at all times to the camera?

A: If the camera supports Timecode Jam Syncing, you do not need to keep the Tentacle Sync plugged in the entire time.

Q: 10. Can this be used with the RODE Wireless Pro instead of using the 3.5mm-to-BNC and Sony Timecode adapter cable combo? (Sony FX3)

A: No, the Tentacle Sync 3.5mm TRS to Multi Interface Timecode Cable for Sony FX3/FX30 will not work with the RODE Wireless PRO.