Great for stages and wall washing, the Eliminator Lighting Mega Bar RGBA EP is a compact, 42” linear bar fixture that offers the flexibility of RGBA (red, green, blue, and amber) color mixing for your club, bar, or mobile DJ setup. The fixture has a total of 320 LEDs, with 64 red, 96 green, 96 blue, and 64 amber diodes. The fixture can be used in stand alone mode or connected in a primary/secondary configuration.

There are six operating modes, including Sound Active mode, Auto mode, RGB mode, Static Color mode, and DMX control mode (4, 6, 7, 9, 10, 18, and 34 channels). Use the 48 built-in color macros for quick and easy programming. The enclosure includes mounting brackets which double as a floor stand. The rear panel includes the LCD menu, 3-pin DMX, and power I/O for connecting up to 20 units, while magnetic end caps ensure the precise alignment of multiple bars. The Mega Bar RGBA EP is compatible with the ADJ RFC wireless remote control (sold separately). A power cord is included.

For Uplighting and Wall Washes    320 RGBA LEDs (Red, Green, Blue, Amber)    0 to 100% Electronic Dimming    30° Beam Angle    DMX Channels: 4, 6, 7, 9, 10, 18, 34    Variable Color Mixing    48 Built-In Color Macros    Daisy-Chain Power up to 20 Units    Includes Power Cord & Mounting Brackets

• 42" indoor linear fixture with 320, 10mm RGBA LEDs (64 red, 96 green, 96 blue, and 64 amber)
• 7 DMX channel modes: 4, 6, 7, 9, 10, 18, or 34 channels
• 6 operational modes: Manual Color, Static Color Change, Auto (Program Run), Sound Active, RGBA Manual control, and DMX512 
• Variable RGBA color mixing offers a seemingly unlimited color palette. Great for stage or wall washing
• 48 built-in color macros
• LED pulse and strobe effect
• DMX512 protocol
• Wired digital communication network
• Flicker free
• Refresh rate: 410 Hz
• Electronic dimming: 0 to 100%
• Beam angle: 30°
• Linkable via 3-pin XLR cable
• 4-button LED display on rear panel
• IEC AC outlet on rear to daisy-chain power (up to 20 units)
• Compatible with ADJ RFC wireless remote control (sold separately)
• Includes mounting brackets to mount on a wall or set on the ground
• Magnet system on endcaps to connect multiple bars together
• Low power consumption
• Very low heat output
• Runs all night—no duty cycle

Related Questions and Answers

Q: 1. Can you easily rollup a wall mounted paper roll with the bar on?

A: You can roll up background paper with the bar attached.

Q: 2. does the bottom shoe have a 1/4 20 female?

A: The bottom of the shoe is solid. Sorry, there's no thread there.

Q: 3. Will work with a panasonic AG-CX10?

A: Yes, the Acebil RMC-P3PL Zoom Control Pan Bar can work with the 2.5mm control port on the Panasonic HC-X2000 UHD 4K 3G-SDI/HDMI Pro Camcorder with 24x Zoom.

Q: 4. Can the end pieces be removed to use slightly wider paper?

A: While the end pieces cannot be removed, there is a longer version of this product with the Savage Background Leader Bar (8.9') B&H # SALB112. https://bhpho.to/2QuLcg4

Q: 5. Does this come with the screws to attach the plate to the receivers?

A: No you reuse the screws currently in the receiver

Q: 6. whats the difference between this item and this other one?: https://www.bhphotovideo.com/c/product/1493598-REG/orca_osp_1040_10_aluminum_bar_for_or_40.html

A: The difference is that OR-OSP-1040-10 is in stock at B&H and OSP-1040-10 is special order shipment from Orca.

Q: 7. It says that each bar comes in 2 pieces, can I put 3 of these pieces together to get a custom length?

A: It is possible to use multiple Savage Background Leader Bars to accommodate a custom width.

Q: 8. this sistem wont fit my standard 19 rack. is there a bigger link bar?

A: The link bar is only used to attach 2 ULX/SLX series receivers together for rack mounting. This is not used to mount to the rack. You will need the additional rack ears compatible with your series of receiver.

Q: 9. Can you easily rollup a wall mounted paper roll with the bar on?

A: Yes you can

Q: 10. How many bar you’ll get

A: There are 3 bars that are 4.5 ft long each.