Designed for travel videography, the CT210 Video Tripod with Fluid Head from SmallRig features a detachable leg for monopod applications, a snap-on quick release plate for easy mounting, and a reversible center column for low-angle shots. With its durable and lightweight aluminum alloy build, the CT210 supports up to 13.2 lb at a weight of only 5.6 lb. The reverse-folding legs allow the tripod to measure only 24" when folded for easy transport in the included carrying bag, belying its versatility and performance with an adjustable height range of 11.4 to 75.6".

Aluminum Alloy Tripod with Fluid Head    13.2 lb Load Capacity, Weighs 5.6 lb    11.4 to 75.6" Height Range, 24" Folded    Reversible Legs and Center Column    Detachable Leg for Monopod Configuration    Quick-Leveling 60mm Half Ball Base    Manfrotto Snap-On Quick Release Plate    1/4"-20 and 3/8"-16 Camera Screws    Rubber and Spiked Feet    Carry Bag, Weight Bag, Smartphone Holder

The CT210 features a fluid damping system that is preset to counterbalance 6.6 lb of weight but can support up to 13.2 lb if needed, ideal for compact to medium-sized cameras and rigs. Included is a Manfrotto-style 501PL snap-on quick release plate with 1/4”-20 and 3/8”-16 camera screws and a locating pin. The quick release plate is compatible with the DJI RS 2, RS 3, and RS 3 Pro gimbals for quick changes between locked and moving shots. The fluid head can pan 360° and tilt +90°/-65°, and the 60mm half ball facilitates fast leveling using the bubble level. Other features include an additional 1/4”-20 accessory thread and a 13.8” fixed pan bar that can be attached to either side.

The tripod features four-section legs with rubber and spiked feet with three angles of adjustment: 23, 55, and 80°. The legs support up to 33 lb of weight and feature flip locks for quick height changes. The adjustable center column is reversible for low-angle shots, and a detachable leg can be mounted to the fluid head for monopod applications with a height range of 23.6 to 78.7". With the center column down, the tripod has a height range of 11.4 to 61". Along with the fluid head and quick release plate, the CT210 comes with a smartphone holder, carrying bag, weight bag, and an Allen key.

Related Questions and Answers

Q: 1. Hi, i would greatly appreciate your advice on what video head to use with this tripod.I was interested in the Manfrotto 701 HDV but i cant seem to find it anywhere online and some sites like CVP says that it is a discontinued stock.What other video head would you recommend that works best with this tripod?Im mostly going to be shooting on dslr (7D)Thank you for reading this,Regards

A: We recommend the Manfrotto 502HD Pro Video, B&H # MAMVH502AH, http://bhpho.to/JANiwX. This head would bolt directly to the 755CX3 MagFiber Video Tripod Legs.

Q: 2. What is the height with the center column down?

A: The Smallrig CT180 tripod with the legs fully extended would be 127cm in height. With the legs fully closed the height would be 63cm. Sizes listed by Smallrig - https://bit.ly/3XcQkTX

Q: 3. What are the differences between 3457 and 3457B?

A: The SmallRig Lightweight Fluid Video Head SM3457B has an upgraded the internal structure over the older discontinued model SM3457.

Q: 4. Is there a way to fit this in the bag without removing the fluid head? Am I doing it wrong? The whole thing does not fit.

A: In order to properly fit the entire SmallRig CT180 Video Tripod with Mini Fluid Head into the bag without removing the fluid head, you must fold the legs up and lower the stem to be even with the legs and it will go right into the bag.

Q: 5. Would this fit on a peak design travel tripod?

A: No, the SmallRig Lightweight Fluid Video Head is not compatible with the Peak Design Aluminum Travel Tripod.

Q: 6. On SmallRig official website it says it has 15kg load capacity, here it says it only has 6.6lb or 3kg load capacity?

A: The head has a 3 kg (6.6 lb) weight limit on the SmallRig CT180 Video Tripod with Mini Fluid Head Kit V2, and the legs can support up to 15 kg. If you work with the head, the safe limit is 3 kg. See below: Head Load Capacity: 3 kg Tripod Load Capacity: 15 kg

Q: 7. Will the Smallrig 3457 fit my Manfrotto 190CPRO4 Tripod?

A: The Smallrig Lightweight Fluid Video Head features a standard 3/8" mounting hole, which would be compatible with the Manfrotto 190CPRO4 Tripod system.

Q: 8. Does it really hold 11 #? I believe a d850 + tamron 150-600 weigh about 6.4 #, it should work?

A: Yes, the SmallRig Lightweight Fluid Video Head supports a payload up to 11 lb. It can support the Nikon D850 DSLR Camera and the Tamron SP 150-600mm f/5-6.3 Di VC USD G2 for Nikon F.

Q: 9. Does the column tube spin or rotate freely when unlocked, or is it keyed so it doesn't rotate?

A: When unlocked the Explorer Photo & Video EX-ACPROCC Carbon Fiber Center Column for Ascent Tripod's center column spins freely.

Q: 10. Can I mount a 70-200mm f2.8 gm with a a7iii on it

A: Yes, the SmallRig CT210 Video Tripod with Fluid Head and Reversible Center Column can support the Sony a7 III Mirrorless Camera (BH #SOA73) with a Sony FE 70-200mm f/2.8 GM OSS Lens (BH #SO7020028GM) mounted to it. For balance sake, you may want to mount the lens to the tripod instead of the camera.