Outdoor Ip Security Camera

Bolin Technology Exu420n 4k60 Outdoor Ndi 6-ready Ptz Camera (dark Gray)

Product Code: ga167130
Availability: In Stock

$22,185.00 $27,287.55

Qty

0 reviews Write a review

Description
Reviews (0)

Bring UHD 4K quality video to your production with the dark gray EXU420N 4K60 Outdoor NDI 6-Ready PTZ Camera from Bolin. This versatile PTZ camera outputs up to UHD 4K60 via 12G-SDI, HDMI, and IP streaming. This model also supports NDI to fit into an existing NDI network, and it is NDI 6 ready. It features a large 1/2.8" CMOS sensor with 8.29MP image capture, a 20x optical zoom, an additional 16x digital zoom, and a wide 78.6° angle-of-view. This outdoor camera features an IP67-rated, nitrogen-filled housing, a wiper, a heater, and a defroster, and the lens features a salt-resistant coating for use in all weather conditions.

A tally light can be added and removed for use in multi-camera environments. The camera can output two simultaneous IP streams via RTP, RTMP, RTSP, or SRT using H.264, H.265, MJPEG formats, and streaming supports up to UHD 4K60. The camera can be controlled via the included IR remote or via IP using ONVIF or VISCA-over-IP, and via serial using VISCA, Pelco-P or Pelco-D, or via FreeD with an optional firmware upgrade. Audio can be embedded or de-embedded from the stream using the 10-pin LEMO-type audio port. An optional fiber-based SDI module can be added using the SFP slot. The camera can be powered using PoE++ or via an optional power adapter.

1/2.8" CMOS Sensor, 8.29MP Up to UHD 4K60 Output NDI, 12G-SDI, HDMI 2.0, and IP Output 20x Optical Zoom, 16x Digital Zoom IP67 Housing, Wiper, Heater, Defroster Genlock, BBS, Tri-Level Sync Support Wide 78.6° Horizontal Viewing Angle Up to 100°/Sec Pan/Tilt Speed Live Stream to Platforms via RTMP/SRT Stereo LEMO-Type Audio Input/Output

Key Specs
Image Sensor	1/2.8"-Type CMOS
Sensor Resolution	Effective: 8.29 Megapixel (3840 x 2160)
Shutter Speed	1/10000 to 1/1 Second
Optical Zoom Ratio	20x
Max Digital Zoom	16x
External Recording Modes	RJ45 3840 x 2160 at 25/30.00/50/60.00 fps 1920 x 1080p at 25/30.00/50/60.00 fps 1280 x 720 at 50/60.00 fps 4:2:2/4:2:0 10/12-Bit via SDI/BNC / HDMI 3840 x 2160 at 23.98/24.00/25/29.97/50/60.00 fps 1920 x 1080p at 24.00/25/29.97/50/59.94/60.00 fps 1920 x 1080i at 50/60.00 fps 1280 x 720 at 50/59.94/60.00 fps
Broadcast Output	NTSC/PAL
IP Streaming	H.264, H.265, MJPEG, NDI, RTMP, RTP, RTSP, TCP, UDP 3840 x 2160 at 25p, 30p, 60p 1920 x 1080 at 25p, 30p, 50p, 60p 1280 x 720 at 50p, 60p
Supported Control Protocols	IP Pelco-D Pelco-P VISCA
PoE Support	PoE++ 802.3bt
Mounting	1x 1/4"-20 Female 1x 3/8"-16 Female
Imaging
Image Sensor	1/2.8"-Type CMOS
Sensor Resolution	Effective: 8.29 Megapixel (3840 x 2160)
Built-In ND Filter	No
Image Stabilization	Optical in Integrated Lens
Focus Control	Autofocus Manual Focus
Exposure Control
Shutter Speed	1/10000 to 1/1 Second
Signal-to-Noise Ratio	50 dB
Minimum Illumination	0.5 Lux (Color)
Flip / Mirror Support	Image Flip, Mirror (Vertical)
White Balance	Presets: One Push Set, Indoors, Outdoors, Manual, ATW, Auto
Lens
Focal Length	3.55 to 63.58mm
Optical Zoom Ratio	20x
Max Digital Zoom	16x
Field of View	Horizontal: 78.59 to 4.92° Vertical: 48.39 to 2.79°
Maximum Aperture	f/2 to 3.8
Minimum Focus Distance	19.7" / 50.0 cm
Video Capture
External Recording Modes	RJ45 3840 x 2160 at 25/30.00/50/60.00 fps 1920 x 1080p at 25/30.00/50/60.00 fps 1280 x 720 at 50/60.00 fps 4:2:2/4:2:0 10/12-Bit via SDI/BNC / HDMI 3840 x 2160 at 23.98/24.00/25/29.97/50/60.00 fps 1920 x 1080p at 24.00/25/29.97/50/59.94/60.00 fps 1920 x 1080i at 50/60.00 fps 1280 x 720 at 50/59.94/60.00 fps
Embedded Audio	HDMI/LAN (RJ45)/NDI/SDI
Audio Recording	2-Channel 16-Bit 48 kHz AAC LC Audio
Broadcast Output	NTSC/PAL
IP Streaming	H.264, H.265, MJPEG, NDI, RTMP, RTP, RTSP, TCP, UDP 3840 x 2160 at 25p, 30p, 60p 1920 x 1080 at 25p, 30p, 50p, 60p 1280 x 720 at 50p, 60p
IP Multi-Stream Support	Simultaneous H.264, H.265, MJPEG, MP4: 2160p
Control
Presets	255 via IP, IR
Move Speed	Pan: 0.01 to 100°/sec Tilt: 0.01 to 100°/sec
Movement Range	Pan: 340° (-170 to 170°) Tilt: 210° (-90 to 120°)
Tally Light	Yes
Supported Control Protocols	IP Pelco-D Pelco-P VISCA
Interface
Video I/O	1x HDMI 2.0 Output 2x BNC (12G-SDI) Loop Output 1x RJ45 (Unspecified Signal) Input/Output
Audio I/O	1x LEMO 10-Pin Mic/Line Input/Output
Other I/O	1x BNC (Genlock) Input 1x RJ45 (RS-422) Control
Expansion Slots	1x SFP Slot
Power
PoE Support	PoE++ 802.3bt
Power I/O	1x Hirose 4-Pin (24VDC) Input 1x Hirose 4-Pin (12VDC) Output
Power Consumption	Device: 12 VDC 30 to 60 W
General
Mounting	1x 1/4"-20 Female 1x 3/8"-16 Female
Dimensions (W x H x D)	8.8 x 16.5 x 10.4" / 223.5 x 419.5 x 265 mm
Weight	22.0 lb / 10 kg (Body Only)

Large 1/2.8" CMOS sensor, 8.29MP
HDMI, SDI, and IP output up to UHD 4K
Outdoor design with IP67 waterproof housing and wiper, heater, and defroster
Supports high-bandwidth NDI and is NDI 6 ready
20x optical, 16x digital zoom
Large, removable tally light
LEMO-Type 10-pin audio input/output, with embedding
Maximum 100°/s pan/tilt in high-speed mode
Live streaming via RTMP, RTSP, RTP, MP2TS over UDP, TS over RTP/SRT, WebRTC
On-screen character generator
PoE++ and 24 VDC power supply options
Optional laser IR illuminator
Optional single-mode LC fiber module via SFP slot

Related Questions and Answers

Q: 1. Can the LAN connection be used to do camera control and video output at the same time?

A: No the Lan output is only for IP video out the Control Interface is the 8-Pin Mini-DIN (RS-232)

Q: 2. Is it compatible with camera controller on Blackmagic ATEM Television Studio Pro 4K?

A: You will not be able to operate the Pan, Tilt and Zoom from an ATEM Switcher with this camera. For that you would need to use the JVC RM-LP100.https://bhpho.to/2LdI9oZ

Q: 3. Does the W in 1082W mean wide angle lens?

A: In this case the W means White. It is the White model of the 1082.

Q: 4. What is the sensor size of this camera??

A: 1/3 is the size of the sensor.

Q: 5. I know newer JVC cameras do both of these, but does this model support SRT streaming and SEI timecode?

A: No, the JVC KY-PZ100 Robotic PTZ Network Video Production Camera does not support SRT streaming or timecode pass-through. .

Q: 6. Is this compatible with switchers other than NewTek? For example, the Blackmagic ATEM TV Studio Pro HD?

A: This camera has both SDI and HDMI outputs which will allow it to connect to any number of switchers, such as the ATEM TV Studio Pro HD.

Q: 7. Will this camera work, plug and play USB, with the ECamm video platform? Thank you.

A: This camera would be able to connect and use its USB port as a video output

Q: 8. What is quality of NDI Video over network? Is it full uncompressed quality or is there a compression of some sort?

A: NDI was made to use existing 1 Gigabit networks to allow easy adoption of the NDI without installing new cabling. NDI does this by using video data compression within its codec. This delivers 1080 full HD video data rates at nominally 100mBit/sec with latency low enough for professional production.

Q: 9. How loud are the movements of this camera? Would it disrupt a quite room?

A: They are not loud. We don't have numbers but no reports either of noise. Generally PTZ cameras are unobtrusive.

Q: 10. Are these camera weatherized in any way?

A: It is not weather sealed. However we should be able to identify an outdoor housing for it. If you would like assistance with that feel free to email us directly at askbh@bhphoto.com.

There are no reviews for this product.