Designed for Liberty 3 Hub and Link systems, the Anchor Audio WBL3 is a wireless beltpack transmitter compatible with headband, collar, ultralite, and lapel microphones. The beltpack operates in the 1.9 GHz frequency range and features a 3.5mm input connector, a volume dial, and an on/off switch. The unit is powered by two AA batteries and can perform for up to 8 hours.

For Liberty 3 and Link Systems    3.5mm Mic Input Connector    Includes CM-LINK Collar Microphone    Volume and Mute Controls    Up to 8 Hours of Operation    1.9 GHz Wireless Frequency Range    Powered via 2 x AA Batteries    Includes Belt Clip

• 1.9 GHz wireless frequency range
• 3.5mm microphone input connector
• Volume and mute control on the microphone
• One-time pair function allows you to pair your mic with your system once without having to repeat the operation
• Runs up to eight hours on two AA batteries

• CM-LINK collar mic
• EM-LINK Ultralite earset mic
• HBM-LINK headset mic
• LM-LINK lavalier mic

Related Questions and Answers

Q: 1. Hi, You have this antenna range A? For body pack

A: The Sennheiser G2 Wireless Antenna for G2 Beltpack Series (486 to 558 MHz), BH #SE575297, will work with the G3 series transmitter beltpacks as well..

Q: 2. Is it compatible with DJI Osmo Action Camera?

A: The DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz) is not compatible with the DJI OSMO Action Camera.

Q: 3. Does it have internal recording like the DJI Mic? Can I clip it in and use it as a recorder without connecting it to Osmo Pocket

A: Unfortunately no. The DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz) will not have internal memory for recording and will require the Osmo pocket 2.

Q: 4. without the do-it-all handle, any other way to connect it to osmo pocket2?

A: For an alternate connection, you will need to purchase the DJI USB-C to 3.5mm Mic Adapter for Pocket 2 and Osmo Pocket (BH #DJOP35A • MFR #CP.OS.00000010.02) and can connect to the Pocket 2 via 3.5mm connection.

Q: 5. Hello Is the Sennheiser EW 100 G3 (558-626 MHz) compatible with this antenna?

A: Yes, the Sennheiser 578854 Antenna is compatible for use with for SK 100/300/500 G3 and SK 2000 Bodypack Transmitters (558 to 626 MHz). The SK 100 G3 is the transmitter that is included with a Sennheiser EW 100 G3 Wireless Microphone System.

Q: 6. Does this antenna work with my Sk/Ek 100 (516-558 frequency)? Thanks for your reply

A: This antenna only works in 558 to 626 MHz

Q: 7. Is this the same mic as the one(s) in the dji wireless mic kit?

A: The DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz) is not the same microphone as the DJI Mic Wireless Microphone Kit.

Q: 8. does it work with ew 100 G3 516-558?

A: This replacement antenna will work with the G3 series as well.

Q: 9. Will this work on the newer G3s?

A: Yes, I bought these antennas to replace some broken ones for ew100 G3, and they are worked good. I measured the length, check frequencies bandwidth with original A-band both are the same. Make sure to get the right bandwidth of the antennas, choose the right band. Easy to replace.B&H customers service is excellent.

Q: 10. can we use this as the second transmitter for the Osmo Pocket 3 (in addition to the transmitter that came with the Combo pack)?

A: No, the DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz) is not compatible with the DJI Osmo Pocket 3. For the DJI Osmo Pocket 3, you will need the DJI Mic 2 Transmitter.