The large, C600 Holster Case from Kinesis provides a secure transport and storage solution for a full or large-sized DSLR camera, a vertical grip, and an attached lens. This case is designed to fit a compatible body and a 70-200mm f/2.8 lens. This case allows the attached lens's hood to be placed in the reverse position. A large front pocket can hold most shoe-mount flash units and a smaller pocket under the lid can be used to store small accessories such as lens cloths or memory cards. To help ensure that the compatible camera and lens combination are always accessible from the rear of the holster, a Kinesis V100 CameraCushion is included to provide elevation from the front of the case if necessary. This Kinesis holster is compatible with the Kinesis Attachment Tab System (KATS) for ease of use with Kinesis belts. Alternatively, generic belts up to 2" thick can also be used and built-in D-rings allow for attachment to a harness or shoulder strap.

0.4" of closed-cell foam on the sides, 0.2" on the rear lid, and 0.6" on the front of the holster cushion the camera and lens placed inside while a 500 denier nylon exterior provides water resistance.

When used on a waist belt, the optional Kinesis Y302 Strap Kit is recommended to prevent the top of the case from pulling away from the belt.

One pair of the Kinesis Siamese SlikClips is included to allow legacy Kinesis TwinBuckle accessory pouches to attach to one side of this holster case.

Kinesis Attachment Tab System Compatible    17.5 to 59" Adjustable Length Strap

Related Questions and Answers

Q: 1. Would it fit Sony 7R IV with Tamron 35-150 mm f/2 with a hood attached ?

A: Yes, Sony 7R IV with Tamron 35-150 mm f/2 with a hood attached will fit inside the Kinesis C600 Holster Case (Large).

Q: 2. What is the maximum waist size for this belt?

A: The belt fits waists 28 - 50 (71.1 - 127cm)

Q: 3. Is there any way to also use a neck strap with this? I'd like to be able to carry hands free between shots, but am not sure I'm ready for the holster

A: Paiwei has got it right, you can attach a strap that mounts to the tripod socket of your camera, like Black Rapid. click the link below to view the options; https://bhpho.to/30bqELy

Q: 4. Can you use this with the spider pro hand strap attached? Is there room for the required washers?

A: Hi Michael - thank you. If you are using the Single Cam System there is no need to use the HS washers. The washers are there only if a user needs to use the SpiderPro HS by itself. In your case, the Hand Strap slot area engages UNDER the SpiderPro plate (sits in between the plate and the camera body) and will not require the extra hardware.Please make sure you watch the hand strap assembly video at a href= http://spiderholster.com target= _blank spiderholster.com/a - pay attention to HOW we suggest you pull the camera in and out of the holster (your hand is out of the HS when holstering) this is shown twice at the end of the video..All the very best to you - thank you for choosing Spider,BestS

Q: 5. Can it accommodate z8 + Nikon FTZ II Adapter + Nikon Teleconverter TC-14E III + Nikon 500mm f/5.6E PF Lens attached?

A: The Nikon Z8 Mirrorless Camera with the Nikon AF-S NIKKOR 500mm f/5.6E PF ED VR 0.9 Lens, Nikon FTZ II Mount Adapter, and Nikon AF-S Teleconverter TC-14E III attached does not fit in the Kinesis C600 Holster Case (Large). Instead, get the Think Tank Photo V3 Digital Holster 150 (XX-Large), BH #THDH150V3.

Q: 6. Will this strap work with the Fujifilm GFX 50s?

A: Thank you Michael and apologies for the delay in returning to you. The camera size is perfect for the Pro Strap, but this Fuji's starp connection is specific, unique design and will NOT work with our strap. In fact, we believe this connection will not work with ANY hand strap on this planet (unless Fuji comes up with an adapter for the rest of us humans).. Thank you, Spider Team

Q: 7. Will this fit sony 200-600 with a7rv attached?

A: The Sony a7R V Mirrorless Camera with the Sony FE 200-600mm f/5.6-6.3 G OSS Lens attached will not fit in the Kinesis C600 Holster Case (Large).

Q: 8. Will this fit a pro body (Canon EOS 1Dx)?

A: yes it will. i'm using it with two 1 series bodies.

Q: 9. Will this fit sony 200-600 with sony a7rv attached?

A: The Kinesis C600 Holster Case (Large) is 12.25 inches long internally, so unfortunately it won't fit that camera and lens combination.

Q: 10. I have an issue wth grip strength, will this help take some of the weight off of my hand grip? Thanks

A: Thank you Daniel.. As you see from others (thank you all for using Spider!) the SpiderPro hand strap does elleviate the weight of the camera. It is the only hand strap that is situated high, close to the wrist, so it really supports the weight of the camera.. It also allows for your hand to go in and out of the strap with no struggle/wiggle you get with traditional starps (huge plus for pro shooters that need to work fast). Universal tripod connection (you can use your own tripod QR plate instead of the provided hardware) so no special connection needed.. You should NOT use the strap to actually carry your camera (it is not a handle) but for support, comfort and security when you shoot..Thank you,Spider Team