Turn one outlet into seven with the black 7-Outlet Surge Protector from Watson, which features seven grounded NEMA 5-15R outlets and can handle power spikes up to 1200 joules. Two of the outlets are also block sized, which lets them accommodate larger plugs without blocking access to other outlets. A 15A circuit helps protect devices such as computers, TVs, and mobile electronics. This surge protector connects to a wall outlet using an integrated plug with a NEMA 5-15P plug and a 6' cord. The plug is equipped with a right-angle connector that is oriented at a 45° offset, which does not block any wall outlets below. In the event that properly connected equipment is damaged during a surge, Watson provides a connected equipment guarantee of up to $50,000.

7 x NEMA 5-15R Outlets (2 Block Sized)    NEMA 5-15P Right-Angle Plug (6' Cord)    1200 Joules of Surge Protection    LED Indicator for Surge Circuits    Rear Wall Mounts    Input: 125 VAC at 60 Hz    15A Rated Current    $50,000 Connected Equipment Protection

Watson's 7-Outlet Surge Protector adds seven additional and protected outlets. If you have a lot of gear, you can now power your computer, TV, sound system, and more from one plug.

The outlets are protected by up to 1200 joules in surging power. LED indicators display working surge and ground circuits so you can easily glance at the outlets to see that your gear is protected.

Watson covers your equipment during power surges and disturbances due to lightning and power-grid fluctuations, up to $50,000 for connected equipment. Whether you're working on your equipment or away from it, you don't have to worry when the weather changes for the worse or the utility company can't handle power.

Sometimes the wall outlet isn't close to the equipment, and the placement of a surge protector can be an eyesore. This multi-outlet unit offers a 6-foot power cord with a right-angle connector. Plug the protector behind your desk or nightstand flush against the wall, and power up your electronics on the other side of the worktable.

The rear wall mounts allow you to mount the surge protector off the ground and with better access. With the outlets on the wall, you won't have to bend down and trek through a jungle of wires to plug and unplug your gear.

Related Questions and Answers

Q: 1. Will the q2 case work on the q3?

A: Yes, the Leica Q2 Protector Case (Black) will also work with the Leica Q3.

Q: 2. does this fit the Leica Q (first Q model)?

A: Yes, it will fit both the Q2 and the original Q.

Q: 3. Does this case have a screw that attaches it to the tripod mount in the camera's base plate or does it slide on and stay in place by friction?

A: No, the Leica M11 Protector Case does not screw into the tripod mount of the camera.

Q: 4. Does the Q2 protector case have a bottom that opens to access the battery and/or memory card, or is one sealed bottom on the case?

A: No. There is no access on the bottom of the case for either the battery or SD card. You have to remove the case to access these two areas. The bottom is solid leather with the thumbscrew in the middle to secure it to the tripod socket on the bottom of the camera.

Q: 5. Can I use bowens mount modifiers with this unit?

A: Yes this will work with Bowens mounts.

Q: 6. If the output is equal to 1200 watts tungsten, but has daylight output at 5200+/-, is it like a 1200 watt HMI?

A: The Genaray MonoBright Daylight LED 1200 has the equivalent output of a 1,200W open-face tungsten light. HMI lights of equivalent wattage have much higher outputs compared to tungsten lights as they are much more efficient, so no, a 1,200 watt-equivalent tungsten (or tungsten-equivalent) light would not be anywhere as bright as a 1,200 watt HMI light source. 5200K is the light source's Kelvin color temperature; as daylight at noon is typically 5600K, so light sources that have an output of 5000-6500K are considered to have a daylight-balanced color temperature. Kelvin temperature, wattage, and light output are all different things and cannot be directly compared to one another.

Q: 7. Will this fit the pelican 1250?

A: We're afraid not. This is specifically for the Pelican 1200, B&H # PE1200B. https://bhpho.to/2KcSDpn

Q: 8. Does this case come with the strap shown? Or is the strap separate/

A: No. This is just for the protector case only. The strap is a separate item and comes in different colors.

Q: 9. How hot do these lights get? Would you be able to use standard silver or white soft boxes or would you need to use a quartz or high heat option?

A: It stays relatively cool. Probably close to 110F to touch (cooler than hot water).

Q: 10. How far apart are the mounting holes from each other?

A: The two mounting holes(slits) are about 8 large, with about a 2: space inbetween them.