Add the AI Theta Pro Wide-Angle Lens from Ubiquiti Networks to the AI Theta Hub (available separately) for a surveillance solution. Ideal for monitoring large and busy indoor spaces, the AI Theta Pro Wide-Angle Lens has an 8MP 1/1.8" image sensor that captures 4K UHD resolution video at 24 fps from a 110.4° horizontal field of view. Mounting hardware is included for a seamless installation.

Connects to AI Theta Hub    8MP Sensor    4K UHD Resolution at 24 fps    110.4° Horizontal Field of View    Indoor Use    Includes Mounting Hardware

Suitable for entrances, lobbies, and large or busy indoor spaces

Enhanced dynamic range for low-light conditions

Image settings include: color, brightness, sharpness, contrast, white balance, exposure control, 2D-DNR/3D-DNR, noise reduction by motion, masking, and text overlay

Can be mounted on a wall or ceiling with the included mounting hardware

Related Questions and Answers

Q: 1. Hi guys,would this adapter work on a Sony FDR AX53 camcorder? It has the 55mm thread but because the AX53 has the floating stabilised lens the glass is quite set into the body and might cause really bad vignetting.Also i don't know how the floating lens of the camera would go moving around behind the wide angle.Thanks

A: Raynox does not recommend this lens for the SONY FDR AX53 camcorder.

Q: 2. Will this work with the Panasonic 12mm 1.4?

A: Yes it will work on 12mm f1.4

Q: 3. Can a filter be screwed onto the outside of the 52mm lens hood?

A: According to the manufacturer, the front opening of the Sensei PRO 52mm Wide Angle Aluminum Lens Hood can accept 72mm filters.

Q: 4. Can this be used with a Tamron 18mm - 250mm zoom?

A: The Sensei PRO 62mm Wide Angle Aluminum Lens Hood is compatible with the Tamron 18-250mm lens, but it might cause vignetting in the 18-24mm range.

Q: 5. will this vignette on a fuji 15-45 below 18mm?

A: Once this lens hood is fitted will I be able to still clip the lens cap on. I intend using it on a Fuji 18mm f2. Also I am assuming based on specifications, there should be no vignetting? Thanks.

Q: 6. Would this work on an RF 35mm 1.8?

A: Yes, this lens hood is compatible with the Canon RF 35mm f/1.8 IS Macro STM lens.

Q: 7. For the 58mm version of this hood, is it possible to use a 58mm pinch type lens cap inside of it? Also, will this cause vignetting on a 17.5mm MFT lens?

A: The 58mm pinch cap works fine. Filters, though you didn't ask about them, are a related issue to consider; you can't attach a filter inside the hood. You must either use 58mm filters behind the hood, or 62mm filters in the hood's front end (either or both could create a vignetting problem). I use this hood on a 6x4.5cm film camera lens, so I can't address vignetting on your lens.

Q: 8. I'm thinking of getting this lens for my Canon 50mm f1.8 with Canon 6D and T3i. Does it cause vignetting or reduce the light value?

A: Adding optics to a lens is at the most going to do no harm but in general it is not going to improve the lens optics. And with a wide angle add-on-lens it will distort. It is always better to use a lens not an add-on-lens.

Q: 9. Does this fit the Nikon 28/1.4D?

A: No, you need the 77mm one. https://www.bhphotovideo.com/c/product/1079788-REG/sensei_lhm_w77_pro_77mm_wide_angle.html

Q: 10. Work on Tokina 11-16

A: Yes, the Sensei PRO 77mm Wide Angle Aluminum Lens Hood will work with the Tokina atx-i 11-16mm f/2.8 CF Lens.