The ikan iLED312-v2 On-Camera Bi-Color LED Light with Digital Display is a compact battery-powered daylight/tungsten balanced on-camera light. It features a continuously variable color temperature between 3200 tungsten and 5600K daylight, and a built-in variable dimmer that can dim the lights output from 100 to 10%. Built into the light is an LCD panel that shows a digital readout of the brightness level, color temperature of the light and features a battery gauge so you know how much power you have left.

The light produces a 60° beam angle, and includes both a removable four-leaf barndoors and diffusion gel. The light features slots for two L-Series type batteries, and it includes two batteries and a dual-battery charger. A 1/4"-20 threaded hole allows you to mount the light to your camera's accessory shoe via the included ball adapter. You can also stack multiple iLED312 lights together using the interlocking rail system. An included soft carry case allows you to easily pack and carry your light unit, gel, barndoors, and included accessories to and from shoots.

2 x iLED 312-v2 Bi-Color LED Lights    1 x IB508-v2 Bi-Color LED Light    3 x Dual Battery Chargers    6 x Sony L-Type Batteries    3 x Power Supplies    3 x Compact Light Stands    3 x Stand Adapters    1 x Kit Bag

The iLED312-v2 features 312 LEDs, and a single knob that allows you to vary the color temperature of the unit from 3200 to 5600K. A separate knob controls the dimming of the unit, with brightness range of 100 to 10%.

The dimmer and color temperature settings are controlled by analog knobs, but the built-in digital readout on the built-in display screen allows you to match the output of other units or repeat setups, if you have to go back and get pick up shots. The display also incorporates a four-step battery gauge so you know how much battery power you have left.

The included four sided removable barn doors are constructed so the doors can interlock together, limiting light leak from the edges, controlling light spill, and providing directionality to your light. The side doors feature articulating leafs that provide you a fairly wide range of adjustment while still controlling light leaks from the edges of the doors.

Although you can attach diffusion gel to the barn doors, the iLED312-v2 features a slot for the included precut diffusion sheet, that can be used with or without the barn doors in place. The diffusion is notched, and a safety tab engages the notch to prevent it from accidentally falling out.

The light unit features slots for two L-Series type batteries of any capacity, and includes two NP550-type batteries. The light can run on one or two batteries, you can use the AC adapter that powers the included dual battery charger to power the light instead, via the small power connector on the back of the unit.

The light incorporates a 1/4"-20 threaded mounting hole in the bottom of the unit, and an interlocking rail system that allows you to stack up to three units vertically or horizontally, with a maximum of six lights.

Related Questions and Answers

Q: 1. What are L-type batteries?

A: They are batteries commonly used with Sony video cameras, field decks, etc...You can find a picture if you search for items on web or B&H website.

Q: 2. I bought these but can't get the adapters to work on stands so they can be angled. The gold screw in top of adapter is 3/8 and doesn't fit in bottom of led panels

A: These should include a ball mount for adjustments like this.

Q: 3. Whats in the box?

A: Adjua, this kit includes the following: 3x Lights with Barn doors3x Compact stand3x Light diffuser3x AC Power adapter6x Sony L Series batteries3x Dual Battery Charger1x Carrying case1x Stand bag

Q: 4. I do not see the diffusion panels listed for the lights. Are these included or do they come separately?

A: The diffusion panels are included !

Q: 5. DOES THIS LIGHTS COME WITH THE BARN DOORS SHOWN IN THE PICTURE?

A: yes it does. they work fine

Q: 6. Could I use these lights to make the light even at the green screen? if not which ones would you recommend for a good price. Thank you

A: yes, you can use the IB508-v2 lights to light the green screen. You might try more than three depending on the length of the green screen.

Q: 7. 2 of the 3 cheap plastic adapters that allow the lights to tilt have broke. Where can I get replacements?

A: If they are under warranty, and they broke due to premature wear and not from an accident, you can contact support@ikancorp.com for a warranty replacement of the mounts. Otherwise, as a replacement, you will want to LM-102 adapter: a href= https://www.bhphotovideo.com/c/product/1244434-REG/ikan_lm_102_light_stand_adaptor_with.html target= _blank https://www.bhphotovideo.com/c/product/1244434-REG/ikan_lm_102_light_stand_adaptor_with.html/a

Q: 8. Do these lights come with the remote to dial up and down their power? Also do the light have tilt capability in the connection that goes on the stand?

A: These lights do not include any wireless remotes like our IFB or IFD lights, however local dimming and color temperature control is on the back of each light with a rotary knob and a LCD display.The IB508-V2 includes an adjustable light stand adapter which allows for tilt and each iLED312-v2 includes a ball head. All 3 lights can be tilted when using the stands and mounting accessories included in the kit.

Q: 9. Does anyone have any experience using these lights in the studio or on location for STILL photography...not video? If so, can you tell me your opinion re light intensity and fall-off as the lights move farther from the subject. I admit that I can't really picture a lux or a footcandle so if you have examples of, say, 10 feet from your subject you're shooting at f5.6 at a shutter speed of x in a location with minimal ambient light? Thank you:)

A: I'm not going to guess at the math you're asking for. What I can tell you is that when I'm shooting video with these lights in a studio environment I have the key light within 3ft of the subject. When shooting outdoors these work, just barely, as a fill light in the daytime when less than 3ft from the subject. Placing this 10ft from a subject, you'd be shooting at some darn high ISO's to get a shutter speed above 1/6oth

Q: 10. Do these lights need a yoke or some other type of adjuster if so what will work for these? thank you!

A: No yoke required. They come with an adjustable ball joint connector. Lights have been really great. Wish they were a bit more powerful. But really they've been a great little kit. No more gels. No more hot lights. No more cables!!Battery power works great!!