Add ambiance to your store or restaurant with the Lab.Gruppen CMA1202, a commercial mixer amplifier that's the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. The 8-input mixer features independent volume controls on the front panel as well as individual front panel master volume and bass/treble controls for each output.

The CMA1202 features two 120W channels that are capable of delivering high-quality sound over both Low-Z (4/8 ohms) and High-Z (70/100V) loudspeaker configurations, offering flexibility on every channel. CMA1202 is easy to install and operate, even for non-technical personnel. It is ideally suited for bars, restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.

For Commercial & Industrial Applications    2 x 120W, 4/8 Ohms + 70/100V Operation    8 Mic/Line Inputs with Volume Control    Individual Output Routing    Individual Master Volume + Treble/Bass    Switchable High-Pass Filter    Direct Drive, Constant Power Technology    GPI Remote Volume via RJ45 Connector    Euroblock + RCA Inputs, Block Outputs    Includes Mounting Hardware and Brackets

• 2 x 120W mixer amplifier for commercial and industrial applications
• Low-Z (4/8 ohms) and High-Z (70/100V) operation per output with switchable high-pass filter
• 8 mic/line inputs with individual volume controls and output routing
• Individual front-panel master volume and bass/treble controls for each output
• Configurable priority muting function for background music override
• Direct drive, constant power technology for superior audio performance and reliability
• GPI remote volume control using standard RJ45 connector and Ethernet cable
• Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
• Front-panel power control button for direct access
• Aux outputs for expansion to additional amplifiers
• Rack-mountable 1 RU, 19" enclosure with brackets for rack mounting
• Euroblock type mic/line input and output connectors
• Convection-cooled, fan-less amplifier technology for low noise

The CMA1202 comes equipped with rubber feet, enabling the amps to be placed on a desk, shelf or any clear surface without any additional installation requirements. However, optional rack mounting hardware is also supplied, allowing one or several models to be housed and protected inside an enclosure. This adds extensive flexibility as a single product can be housed in a half 19" rack or full rack enclosure as well as a pair of amplifiers can easily be mounted side-by-side in a single rack space. With the included brackets the unit can also be mounted to a wall or under a table/shelf.

The CMA1202 has a flexible power scheme with seamless and automatic power on/off based on the input signal, which reduces consumption when a signal is not present. With virtually zero configuration required, an energy smart and hassle-free amplifier system can easily be set up for hands-off operation. If the CMA1202 is powered on but does not receive an input signal for 20 minutes, the system automatically enters sleep mode to reduce power consumption. As soon as the Auto Ramp circuit detects a signal, the system powers on and normal operation resumes. The amplifier can also be instantly forced into standby mode or awakened via the front-panel power button.

CMA1202's controls are sublimely intuitive, allowing the operator to quickly make adjustments. The front-panel power button and Master volume knob are easily accessible, enabling virtually anyone to operate the system. Bass and Treble controls are also available for fine tuning, but require a tool when making changes.

For connecting a balanced source such as a mixer or audio processor, a standard 3-pin Euroblock Input socket is provided. Alternatively, RCA cables can be connected for unbalanced stereo sources (summed to mono), such as players, phones or computers, however only one input source should be used at a time. Loudspeaker Output is provided in the form of a standard 2-pin Euroblock socket.

Intuitive configuration of the flexible outputs is provided directly adjacent to the rear panel Euroblock output connectors with dipswitches, which allow selection of 100 V, 70 V, 8 ohms, or 4 ohms operation individually per channel. This configures both the maximum voltage of the output and the gain through the device. An individual control engages the built-in high-pass filter, which should be used on all constant voltage systems to avoid saturation on transformer-enabled loudspeakers and to help maintain sound integrity.

The RJ45 receptacle on the rear panel opens up a broad range of remote control options, including the CRC-V Series of wall controllers and a stylish tabletop controller, the LAB.LEVEL. All can be interconnected via inexpensive and readily available Ethernet cabling.

Commercial installs vary widely in scope and often grow and change over time. The CMA1202 is part of a family of products that provides both single and dual zone products that are perfect for building out a system to any size. With its individual zone volume and remote control capabilities, the CMA1202 is an ideal building block for a dynamic and scalable system solution.

The CMA1202 2 x 120 watt Commercial Amplifier makes it easy to bring highest-quality music and announcements to business and industrial environments in an easy to integrate, and even easier to operate system. Plus, with features such as its Auto Ramp and revolutionary direct drive constant power technology, the energy efficient CMA1202 can generate enough energy savings to pay for itself in virtually no time at all.

Related Questions and Answers

Q: 1. Do the stereo inputs take balanced 1/4"?

A: No, the stereo inputs are unbalanced and accept 1/4" TS connectors.

Q: 2. Does anyone know were you can order a replacement antenna? The antenna broke on my ui 12 mixer.

A: Isn't this the replacement on BnH? https://www.bhphotovideo.com/c/product/1096529-REG/tp_link_tl_ant2408cl_indoor_omni_directional_antenna.html

Q: 3. is the dc power adapter input universal such as 220v 0r 240v as well as 110v or 120v or for the usa only as in 110v or 120v ?

A: The adapter included with the Yamaha MG06 available here at B&H will be compatible with 120 VAC only.

Q: 4. how do I connect this mixer to another mixer?

A: The Yamaha MG06 mixer has a stereo main output that would be able to connect to two input channels on another mixer. You have both XLR and 1/4 jacks available.

Q: 5. Does this come with it's own dust cover?

A: No it does not. However, this dust cover will fit, BH#GAGMC2222.

Q: 6. Can you load a mix to two tracks and have it there for others to more add tracks later?

A: Yes, you can import a file (such as the master bounce of a mix) into a project using a USB flash drive in USB HOST mode. After importing a file, you can use all other open channels to record more tracks.

Q: 7. Can i plug 1/4 TS cabbles on the 1/2 input?

A: Channels 1 and 2 on the Yamaha MG06 can accept a TS or TRS input connection.

Q: 8. Is phantom power only on ch4 or all xlr inputs?

A: +48 volt phantom power is available on channels one through four.

Q: 9. Do all tracks bypass onboard effects when recording 20 separate tracks to a SD card for import into a DAW for post production? I want to mix live with effects to FOH and monitors, but record all tracks without any effects for later import and mixing.

A: All individual tracks will be recorded without any effects applied. If recording on the Master track, all effects will be heard on the recording to the Master track, but not on the individual tracks. The individual tracks can be set to record pre or post compressor in the Menu of the L-20.

Q: 10. is the songs avialable inbuilt?

A: No song library included with this device, this is just a mixer and wireless system, Not a Karaoke player.