This iOptron LiteRoc Tripod for CEM26, GEM28, HEM27, and HAE29 equatorial telescope mounts provides the stability of a larger 2" tripod but with lighter 1.75" diameter legs. Specially designed leg cuffs, sockets, and locking levers add rigidity with less wobble when legs are fully extended, versus conventional designs. A center spreader locks legs into position to add even more stability and vibration suppression, while the accessory tray keeps eyepieces, flashlights, etc., handy. To accommodate a wide variety of users and viewing positions, it has an adjustable height of 30 to 47".

Leg Cuffs, Sockets & Locks Add Rigidity    Leg Spreader/Lock & Accessory Tray    Adjustable Height of 30 to 47"

CEM26, GEM28, HEM27, and HAE29

Related Questions and Answers

Q: 1. My tripod does not have a leveling base. Could I mount this tracker on top of my ball head to get it level or does this tracker need to mount directly to the tripod and therefore requires adjusting leg length to be level?

A: The Model has a 3/8"-16 socket, so you would need an Adapter to reverse it to a 1/4"-20. I don't recommend doing this, and the weight could be top heavy. I would recommend just mounting this onto the Legs only.

Q: 2. Are the motors tucked in this version?

A: The motor and gears of the Losmandy G-11 GFT are internal.

Q: 3. How does the 1/2X tracking rate work. It's supposed to allow you to have the sky and also the ground without any blurring of the ground portion of the image. Has anyone tried this? How does it work? Thanks.

A: It cuts down the movement tracking There are some YouTube video demonstrations

Q: 4. Will the IOptron carbon fiber tripod work with the ZWO AM5 equatorial mount?

A: The iOptron Carbon Fiber Tripod (21-36.8") is not compatible with a Zwo mount.

Q: 5. can I attach a Celestron Evolution 6" to this mount?

A: Yes, you can

Q: 6. Is this counterweight compatible withe the CEM70G shaft? Thanks.

A: The iOptron 5.5 lb Counterweight for iEQ45/CEM60 EQ Mounts BH #IO802705 • MFR #8027-05 has a 1.1" hole and should work on the CEM70G shaft.

Q: 7. What is the manufacture date for this G11, and does it include Gemini-2 "Mini" goto controller?

A: We have the latest version with the Mini controller.

Q: 8. What does the camera mount on if the tracker attaches to the tripod? Where is the ball head used?

A: The Ball Head is used on the left hand side of the Tracker. The bottom of the Mount attaches to the Tripod.

Q: 9. Will this case hold the IOptron Tri-Pier?

A: Yes, this case will work with the iOptron Tri-Pier 360 for CEM120 EQ Mount (Black/Red), BH #IO8037.

Q: 10. How do get Integrated AutoAlign illuminated polar scope to turn on? I did remove the cap and tried adjusting the LED level.

A: In the manual page 8 figure 5 shows the no off switch.